|
| 1 | Dismantling, clearing away and carefully stacking materials useful for re-usefor any thickness of Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs. |
| 2 | Relying of Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundationincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification. |
| 3 | Renewing and refixing the damaged aluminium anodized natural colour matt finish fully PLB partition with 63.50 x 38.10 x 1.28mm extruded box section at bottom, vertical and horizontal members.The vertical members are spaced at 80mm centre to centre to horizontal members are spaced at 0.80M, 1.60M and 2.40M height from the floor level.Panels should be covered with 9mm thick both side PLB exterior grade with necessary accessories like rubber beedings, aluminium clips, screws etc.The aluminium surface is to be anodized with matt finish under electrically controlled condition in accordance with ISI 1868 / 1962 specificaitons for an average wall thicknessof not less than 15 microns.The rate is inclusive of cost of materials, conveyance, scaffolding charges if any required etc and necessary dismantling making holes in RCC (or) masonry works with power drill and redoing the same to the original condition after fixing the partition etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 4 | Renewing and refixing in position aluminium anodised partly top 1/2 galzed and partly bottom 1/2 panelled door and frame made out of box section 101.6x44.45x3.18mm thick at 2.319 kg\m door shutter made out of box section 47.1x44.45x2.5mm at 1.202 kg\m for vertical style and top, lock rail sections of size 50x44.50x2.5mm @ 1.292 Kg/m and bottom 100.4x44.45x2.50mm at 1.974kg\m using clips of size 17.15x17.27x1.5mm at 0.176 kg\m with necessary metal screws, rubber beading, strike plate type handle ofsize 100x30x1.60mm at 0.988 kg\m on both sides, tower bolts, lock pivot arrangements and top 1/2 portion with5.50 mm thick forested glass and bottom 1/2 portion with both side prelaminated board ( MDF ) 12mm thick for panel portion with 1 No. of hydraulic door closers of approved quality using aluminium extruded section body tubler type universal with double speed adjustment with ISI monogram including cost of furniture fitting such as Pivot, hinges, Tower bolt, lock, door stopper and all materials labour power consumption required for fabrication drilling required for fabrication drilling holes in RCC columns floorslabs masonry wall wherever necessary with power drills to the required extent and make the same to original condition after fixing and as directed. All the aluminium sections are to be anodised with matt finish under electrically controlled condition in accordance with IS 1868-1962 for an average anodic flim thickness of 15 microns etc., complete. The materials should be got approved by the Executive Engineer before use on works. The rate shall be inclusive of all materials, labour for fixing transportation loading, unloading, and all other incidential charges. |
| 5 | Single Leaf |
| 6 | Renewing the damaged Hydraulic Door closer of various sizes of approved quality using Aluminium Extruded section body tubular type universal hydraulic door closer with double speed adjustment like HARDWYN (make) \"GAZEL\" (or) equivalent (with ISI Monogram) |
| 7 | Renewing the damaged designed joint free ceramic tiles of size 400 x 400 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works). |
| 8 | Renewing the damaged floor with best quality Stain Free Nano Polish Vetrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three M-sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.(The make and brand of the tiles should be Johnson / Kajaria / Somany / Nitco / RAK which has to be got approved by Executive Engineer before use on works) |
| 9 | Repainting two coats of old plastered wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour without primer including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 10 | Renewing the damaged in position of aluminium natural colour matt finish louvered ventilator in all floors made with extruded aluminium section of following size with necessary accessories such as rubber beading, best quality of handle including supplying and fixing of 4 mm thick plain glass including cost of all materials, labour power consumption required for fabrication drilling holes in RCC column/floor slab/ masonry wall wherever necessary with power drills to the required extent and making good to the original condition after fixing etc., and as directed by the departmental officers etc. complete.The aluminium frames to be anodised under electrically controlled condition in accordance with ISI 1868/ 1962 specification for an average anodic film thickness of not less 15 microns and all the materials should be got approved by the Executive Engineer before use on work. |
| 11 | Renewing the damaged screen with new screen rod, brackets and including labour charges etc., complete complying with standard specification and as directed by departmental officers. |
| 12 | Renewing the damaged screen cloth with new screen cloth and including labour charges for stitching, conveyance charges etc., complete complying with standard specification and as directed by departmental officers. |
| 13 | Sub Total Amount for above all items (excluding GST) |
| 14 | GST 18% for above SubTotal Amount |
