Procurement Of 1.5T Windows, 1.5T And 2.0T Split And 3T Tower Ac Machines For Use At Different Area Of Ktps. , Air Conditioner, Window Type, Cap: 1.5T Additional Data: Make :Bluestar/Carrier/Daikin/Hitachi/Voltas The Machine Should Be Non-Inverter Type And Category Minimum 3(Three) Star Or More. Non Inverter Type,Copper Coil, Bee Rating: 3 Star Minimum, Refrigerant:R 32/R-410 Or Higher Grade, Compressor: Rotary, Remote Controlled Note: 1.Test Certificate Is Must With Supply Of Material 2. Supply Of Water Drain Pipe, 16Amp Plug Top, Remote Battery Etc. Are Under Vendor Scope. , Air Conditioner Split Type Capacity:1.5T Forroom Ac Additional Data: Make :Bluestar/Carrier/Daikin/Hitachi/Voltas The Machine Should Be Non-Inverter Type And Category Minimum 3(Three) Star Or More. Non Inverter Type, Copper Coil, Bee Rating: 3 Star Minimum, Refrigerant: R 32/R-410 Or Higher Grade, Compressor: Rotary, Remote Controlled Note: 1.Test Certificate Is Must With Supply Of Material 2. Supply Of Thee(03) Meter Interconnecting Copper Tubes(1/2” &1/4”) Of Indoor-Outdoor Unit, Water Drain Pipe, Tube Insulation Taping, 16Amp Plug Top, Remote Battery Etc. Are Under Vendor Scope. , Tower Ac, 3 Ton, 415V, 3Ph Additional Data: Make :Bluestar/Carrier/Daikin/Hitachi/Voltas The Machine Category Minimum 3(Three) Star Or More. Non Inverter Type, Condenser Coil: Copper, Refrigerant: R 32/R-410 Or Higher Grade, Compressor: Rotary, Filter: Anti Dust, Cooling Ambient Temp>50Deg C, Noise Level(Indoor):< 52Db, Operation: Remote Controlled, Power Supply: 415V/3Ph/50 Hz, , Wall Fittings For Outdoor Unit,Split Ac Necessary Wall Fittings For Outdoor Unit Of Split Type Air Conditioner Machine (Including Nut-Bolt & Clamp) Additional Data: Standard , Installation & Commissioning Of 3Tr Ac Installation & Commissioning Service Charge Should Include Fabrication & Fitting Of Stand Of Indoor And Outdoor Units With Supply Of Necessary Hardware As Per Requirement Along With Installation. Consumables Like R-32/R-410 Refrigerant And Any Other Required If Any Is Under Vendor Scope. Again, Arrangement Of Tools & Tackles Are Also Under Vendor Scope. , Installation & Commissioning Of Windows/ Split Ac Installation & Commissioning Service Charge Should Include Fabrication & Fitting Of Mounting Arrangement Of Indoor And Outdoor Units In Case Of Split/ Single Unit In Case Of Windows With Supply Of Necessary Hardware As Per Requirement Along With Installation. Consumables Like R-32/R-410 Refrigerant And Any Other Required If Any Is Under Vendor Scope. Again, Arrangement Of Tools & Tackles Are Also Under Vendor Scope , Fitting Dressing Saddling Of Tower Ac Laying, Dressing And Saddling Of Interconnecting Accessories Between Indoor And Outdoor Units With Supply Of Following Items: Copper Pipes 5/8 “And 3/4 “(Thickness Should Be Minimum 0.8 Mm), Nitrate Rubber Of Thickness 9Mm To Cover The Entire Copper Tube, Water Drain Pipe (Dia-5/8 Inch, Nylon Braided) , 4 Core Copper Cable 2.5 Mm (Make-Polycab/Havells), Rapping Tape Etc , Fitting Dressing Saddling Of Split Ac Laying, Dressing And Saddling Of Interconnecting Accessories Between Indoor And Outdoor Units With Supply Of Following Items: Copper Pipes 1/2 “And 1/4 “(Thickness Should Be Minimum 0.8 Mm), Nitrate Rubber Of Thickness 9 Mm To Cover The Entire Copper Tube, Water Drain Pipe (Dia-5/8 Inch, Nylon Braided) ,3 Core Copper Cable 2.5 Mm(Make-Polycab/Havells), Rapping Tape Etc.
