|
| 1 | Demolition of brick work or stone boulder masonry,built in lime mortar or cement mortarincluding all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 2 | Demolition of concrete (un re-inforced)of any descriptionand in any positionnot other wisespecially provided for complete all as specified and directed by Engineer-in-Charge. |
| 3 | M&L forplain cement concrete 1:4:8 mix,type D2 (using 40 mm graded stone aggregates) as in sub base complete all as specified and directed by Engineer-in-Charge. |
| 4 | M&L for wallingor randomrubbleun coursedwellbonded beded and solidlyheartedbuiltin cement mortar 1:6 brought upto course complete all as specified and directed by Engineer-in-Charge. |
| 5 | All as per item no -04 but Except stones. |
| 6 | M&L for Extra over stone wallingfor hammer dressingto face stonesand dressing offace beds and joints,as specified ,of random rubblewallingun coursedbroughtuptomaximum depressionof 40mm thickon granite or trap stones complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for Raised pointingin cement mortar1:4 to random or polygonal rubbleun coursedor up tocourse completeall as specified and directed by Engineer-in-Chagre. |
| 8 | M&L for Plain Cement ConcreteType B1 1:2:4(using 20 mm graded granite stone aggregate) as inplinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates,etc and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L Plain Cement Concrete Type C21:3:6(using 20 mm graded granite stone aggregate) in foundations, filling and mass concretecomplete all as specified and directed by Engineer-in-Charge. |
| 10 | Dismantling posts or struts (wood ,steel or RCC ) any section ,including taking out embaded portion concrete ,brick work ,masonary,etc and making good disturbed ground complete all as specified and directed by Engineer-in-Charge. |
| 11 | Dismantling ofbarbed wire fencing wire of any description etc |
| 12 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type ofstandard rails strain- ing bolts, including, securing or tying atrossings with and provision of galvanised mildsteel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply only chain link fencing & line wire, MS galvanised of any size and type complete all as specified by Engineer-in-Charge. |
| 14 | Fixing for chain link fencing including line wires, any mesh, size, rails, straining bolts, etc. including provision of binding wire. (Chain link fencing and line wire shall be paid at supplied only rate) complete all as specified and directed by Engineer-in-Charge. |
| 15 | S&FMild steelround bars 10mm dia and over, cut to length, bent to shaperequired, including cranking, bending spirally for hooping for columns, hookingends and binding with and including mild steel wire (annealed) not less than 0.9mm dia orsecuring with clips Fe-410-W 432(Part I) (Gde.E-250) Part- I quality-A complete all as specified and directed by Engineer-in-Charge. |
| 16 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 17 | S&Ffor mild steel work forposts,of fencing ,etc(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by Engineer-in-Charge. |
| 18 | M&L for Preparation of new or previously untreatedsteel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of anti corrosive paint over acoat of epoxy primer complete all as specified and directed by Engineer-in-Charge. |
| 19 | Supply and fixingin repair concertina coilof dia 600mmpunched tape having 50 nos rounds per 06 mof length spring core of dia 2.5mm ,Zinc coating 230 GSMwsith bladeProfile BTO -10 which blade thickness 0.5mm ,blade length 10mm and blade width 13mm with spacing 26mm c/c fixed overY-shaped angle iron including necessary arrangements for fixingwith G.I.staple sand G.I.clips ,bolts etc, complete all as specified and directed by Engineer-in-Charge. |
| 20 | M & L for Point wiring with cables of size 2.5 sqmm for wiring & cables of size 2.5 sqmm both (FRLS) as continuous earth wire for one 15 Amps, 3 pin Switch/Socket outlet on Independent board complete all as specified and directed by Engineer-in-Charge. (Note : cutting chases & making good of disturbed surfaces shall be measured and paid separately). |
| 21 | S & F Switch socket combination, 5 in 1, 5/15 Amps, 240 volts, flush type complete all as specified and directed by Engineer-in-Charge. |
| 22 | Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat,NRV, connection piece etc. complete all as specified and directed by Engineer-in-Charge. |
| 23 | S & F of PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and directed by Engineer-in-Charge. |
| 24 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings with outer diameter of 20mm on walls for hot & cold water complete all as specified and directed by Engineer-in-Charge. |
| 25 | S & F Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof. |
