}

Tender For Supply And Delivery Of Light Commercial Vehicle (Lcv) 2.0 Cum Capacity With Box Tipper Bs4 For Using Swm Work In Kollencode Municipality, Kanniyakumari-Tamil Nadu

Municipal Adminitration And Water Supply Department has published Tender For Supply And Delivery Of Light Commercial Vehicle (Lcv) 2.0 Cum Capacity With Box Tipper Bs4 For Using Swm Work In Kollencode Municipality. Submission Date for this Tender is 21-02-2025. Vehicle Hiring Service Tenders in Kanniyakumari Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

47647593
Tender For Supply And Delivery Of Light Commercial Vehicle (Lcv) 2.0 Cum Capacity With Box Tipper Bs4 For Using Swm Work In Kollencode Municipality
Open Tender
Indian
Tamil Nadu
Kanniyakumari
21-02-2025

Tender Details

Supply And Delivery Of Light Commercial Vehicle (Lcv) 2.0 Cum Capacity With Box Tipper Bs4 For Using Swm Work In Kollencode Municipality , Supply And Delivery Of Light Commercial Vechicle With Following Specification Engine Cc -700-1250 Cc With 2 To 4 Cylinder, Max20-30 Bhp @2500Rpm And Above Load Capacity - 2. Cum With Fuel Engine , Vechichle Emission Norms -Bs Vilength Of Chasis :3800Mm - 3950 Mm, Width Of Chasis :-1500Mm To 1550 Mm Ground Clearence 150Mm -165Mm , Fuel Tank Capacity : Diseal 30 To 40 Ltrscng 12-25Kh Size Of Tyres -145R 12 - 5 Nos., Wheelbase - 1900Mm- 2250 Mm Gross Vechicle Weight - 1550 Kg- 1900 Kg Single Plate Dry Friction Diapharm Cluth With Manual Transmission System And 4 Nos. Speeds (4F+1R) Power Steering And Speed Governors Fitted. Pay Load : 800 To 1000 Kg Tipper Body Length : 2100 -2200Mmmild Steel, Tipper Body Width : 1400 -1500Mmmild Steel Tipper Body Height : 750 Mm To 950Mm Mild Steel And Side Portion (Lh And Rh) And Rear Door Sheet 2Mm Thick, Mild Steeltipper Body Top Sheet Including Frame Sheet Thickness1.6 Mm Mild Steel , Tipper Body Top Lid Sheet Thickness : 1.2Mm Mild Steel And Tipper Container Should Be Fabricated With Two Doors On The Rear Side And Four Doors On Four Top Corners Of The Containers With Hinges And Locking System. A Partition Should Be Provided On The Middle Of Containeralong The Vertical Length Of The Body. Tipper Body Top Lid Main Sheet Thickness 75X40x6mm. Repurted Hydraulic Cylinder Make, With Maiengine Hydraulic System Driven , Pump With Is Make Standard And Painting With One Coat Of Anticorrasive Epoxy Primer And Two Coats Of Enamel Paint For Approved Quality To Ensure Longlasting Resistance For Weatherizing And Breakage. Then Color Shade Should Be As Per Norms Lettering To Be Carried Out As Dept.Officers. Tipper Body Rear Door Shall Be With Necessary With Locking Facility And 25000Km/12 Months Whichever Is Earlier Warranty And Vechicle With Sensor And Gps Tracker As Per The Dma Specifications.

Key Value

Document Fees
Refer document
EMD
INR 73000.0 /-
Tender Value
INR 73 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail