|
| 1 | Rewiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End.(SD-267) |
| 2 | Rewiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Stair case Light point Higher End. (SD-296) |
| 3 | Renewal by supply and fixing of single box type 20W LED fitting complete with 20W LED tube light with TW round block on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting with necessary connection. (DATA-1) (Higher End) |
| 4 | Renewal by supply and fixing of LEDWall Bracket fitting 3000K with PVC unsheathed copper leads from terminals to the fitting. (DATA-2) |
| 5 | Renewal by supply and fixing of 11W 1 feet LED Mirror lamp 3000K with PVC unsheathed copper leads from terminals to the fitting. (DATA-3) |
| 6 | Renewal by supply and fixing of 15 W LED Reading lamp 3000Kwith PVC unsheathed copper leads from terminals to the fitting. (DATA-4) |
| 7 | Renewal by supply and fixing of decorative customized type 60W Chandelier 3000K (Philips make Monarch/Eq) of suitable dimension suspended from suitable special type clamp, with PVC unsheathed copper leads from terminals to the fitting it should be customised as per the specification. (DATA-5) |
| 8 | Renewal by supply and fixing of decorative customized type 42W Chandelier 3000K (Philips make Mushroom Model /Eq) of suitable dimension suspended from suitable special type clamp, with PVC unsheathed copper leads from terminals to the fitting it should be customised as per the specification. (DATA-6) |
| 9 | Renewal by supply and fixing of Recessed / Surface 6\" x 6\" 12W LED fitting 3000K (Philips make /Eq) on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting. (DATA-7) |
| 10 | Renewal by supply and fixing of LED customized hanging pendent light with 20W, 3000K made of brass/ MS housing with antique bronze colour (Higher End) suspended from suitable special type clamp, with PVC unsheathed copper leads from terminals to the fitting. (DATA-8) |
| 11 | Renewal by supply and fixing of 2x 3W LED Updown light fitting 3000K with PVC unsheathed copper leads from terminals to the fitting. (DATA-9) |
| 12 | Renewal by supply and fixing of 14W LED down light fitting 3000K with PVC unsheathed copper leads from terminals to the fitting. (DATA-10) |
| 13 | Renewal by supply and fixing of 9 W LED (Lower End) in the Existing BH point.(DATA-11) |
| 14 | Renewal by supply and fixing of AC/ DC 76mm buzzer/ callbell suitable for 230volts 50c/s single phase AC supply on suitable TW board with push switch. (SD-105) |
| 15 | Renewal by supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . (SD-448) |
| 16 | Renewal by supply and fixing of200W- LED flood light fitting (Philips/ Havells/ Luker/eq) on MS angle iron frame 38x38x6mmwith PVC unsheathedcopper leads from terminals to the fittings.(DATA-12) |
| 17 | Renewal by supply and fixing of LED Strip light with connections complete. (DATA-13) |
| 18 | Renewal by supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End(SD-377) |
| 19 | Renewal by supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD-401) |
| 20 | Renewal by supply and fixing of 3nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End(SD-389) |
| 21 | Renewal by supply and fixing of 2 no. 6A two module socket, 1no.6/16 A two module socket , 2 nos. 6A one module switch, 2 nos. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD-431) |
| 22 | Renewal by supply and fixing of 1500 watts automatic Electric Water Heater of 35 litres capacity suitable for 230V 50 c/s AC supply on suitable MS Clamps with 3 core flex wire but without plumbing connection.(DATA-14) |
| 23 | Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End. (SD-514) |
| 24 | Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End. (SD-532) |
| 25 | Supply and fixing of32A DP MCBin sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection. [Higher End] (DATA-15) |
| 26 | Supply and erection of 5.0kVA sinewave single phase in single phase out line interactive Technology Inverter system for existing load purpose with 10 NOs inverter range 12V/42AH capacity SMF battery for 1 Hour Backup Time depending upon the load condition with connections complete. a) Capacity 5000VA /with pure sinewave. (Inverter make Exide/ Mircrotek / Luminious)/ Equlentb) Input volt range 380V to 460V AC Three phase.C) Out put Voltage 230V AC, Single phase.D) Back up time 1 Hour.E) Digital indication showing mains On, Inverter ON, Low Batter, Battery Voltage, Connected load in watts.f) Fuse protection, in built resettable circuit breaker protection.g) Battery should be Exide make with warranty not less than 24 Months.h) Steel stand to house inverter and batteries. (SR) |
| 27 | Renewal by Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed FRLS Cu.Conductor of 1100V Grade in suitable PVC rigid pipe on wall and ceiling withpainting of suitable colour. (DATA-16) |
| 28 | Renewal by supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 1.5sq.mm copper wire with painting of suitable colour. (SD-54) |
| 29 | Renewal by supply and run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 2.5sq.mm copper wire with painting of suitable colour. (SD-336) |
| 30 | Renewal by supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 4 sq.mm copper wire with painting of suitable colour. (SD-56) |
| 31 | Supply and run of 4 of 6 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth Wire connection of 6 sqmm copper wire with painting of suitable colour. (SD-62) |
| 32 | Renewal by supply and fixing of 1 No. of Post top luminaireintegrated with 2x30W LED Module of Chinar Lighting Pole Kite KP4223/ Equalent on3.66 mtr decorative garden lightingpole of Slyvia Double Bracket Kite KP4379 / Equalentto be mounted on suitable concrete foundation with necessary bolts and nuts andSupply and fixing of 1no of 6A SP MCB (Legrand/ Hager make), 4way terminal block inside the built in Control box with PVC unsheathed copper leads from the terminals to the fitting. (DATA-17) |
| 33 | Renewal by supply and fixing of 65 mm dia. (2 -1/2\") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour . (SD-456) |
| 34 | Renewal by supply and laying of 4 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (SD-180). |
| 35 | Renewal by supply and clamping of 4 x 10 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. (SD-198) |
| 36 | Renewal by supply and clamping of 4 x 10 sq.mm PVC LTUG armoured LTUG cable in suitable GI (Class\"B\") pipe on wall with MS Clamps. (DATA-18) |
| 37 | Renewal by supply and fixing of brass cable gland for 4 x 10 sq.mm PVC armoured LTUG cable, with earth connection. (Data-19) |
