Tender For Construction Of Capacitor Bank At 132 Kv Gss Sawar
Tender Value
9.75 Lakhs
Estimated cost
Bid Submission
24 Feb 2025
0 days left
EMD
19500
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sawar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Capacitor Bank At 132 Kv Gss Sawar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Feb-2025 | Corrigendum | Date | 24-Feb-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m andlift upto 1.5 m , disposed earth to be levelled and neatly dressed: |
| 2 | Earth work in surface excavation not exceeding 30cm. in depth but exceeding 1.5 meter in width as well as10 Sqm on plan including disposal of excavated earth up to 50 Mtr. and lift up to 1.5 Mtr. disposed soil to be levelled and neatly dressed : All kinds of soil (B 1/1.1) |
| 3 | B-3.1.6Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 4 | B-4.1 \"Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix \"B-4.1 |
| 5 | B-4.9Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. |
| 6 | B-4.13.3\"Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (\"Original producers\" who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)\"Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 7 | B-6.1.6 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 8 | B-11.3.1Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete.40mmthickwith20mmthicknominalsizeaggregate. |
| 9 | B-12.3.2Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. |
| 10 | B-9.1 Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. |
| 11 | P&F rigid PVC pipe IS 4985 mark class.II 4 Kg sqm appd.quality make incl. Jointing the pipe with solvent cement rubber ring and lubricantA. 110mm dia (S 3/ 3.16.3) |
| 12 | Painting with enamel paint of approved brand and manufacture to give an even shade one or more coats on new work (B 12/ 12.46.1) |
| 13 | Add extra for item No. 6.1 & 6.2 for :Wall up to 30 Cm. and less thickness.(B-6/6.3.4) |
| 14 | Carriage of material Earth sand line morram manvre or sludge for 500 meter (0.5 km) (G.5/5.1.6) |
| 15 | Carriage of material : Building Rubbish Stone metal (Grit and ballast etc.)for 20 KM |
| 16 | Supply of Stone Aggregate (Single size) : 40 mm nominal size |
| 17 | Demolishing R.C.C. Work manually/Mechanical Means including stacking of steel Bars and Disposal of unserviceable material within 50 meteres Lead as per direction of Engineer-in-Charge.B-14.3 |
AI Tender Summary
Tender Timeline
Feb 17, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
Feb 24, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedFeb 24, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 25, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender