|
| 1 | PART (A) - CIVIL WORKS |
| 2 | PUMP HOUSE |
| 3 | Supply of all labour, materials,T&P etc. and construct pump house(3.6 M X 3.0 M X 3.6 M) - cum - chloronating (1.8 M X 1.2 M X 3.0 M)) as per departmental type design at various sites. |
| 4 | Supply of all materials, labour, T&P etc. and construct an RCC over head tank of following capacitywith RCC staircase and 1m wide balcony, G.I. Pipe and angle iron posts around the balcony and at the dome periphery, M.S. ladder from the balcony to the top of tank and inside the tank, supply and fixing M.H. cover with locking device, ventilator, lightening conductor, water level indicator, fixing of puddle collars and bell mouths, supply and fixing M.S. clamps with RCC coloumn, 25 mm thick PCC 1:2:4 floor over 80 mm PCC 1:4:8 in appron, 150 mm semicircular drain around the tank, escape channel of 20m length, box type enclosure at the entrance of the staircase having locking arrangements, two coats of snowcem paint and testing of tank for water tightness etc. and also including the cost of supply and fixing of all necessary CI D/Fpipes and valves etc. all complete including testing of bearing capacity of soil and site clearance and other unforeseen items for following zones/sub zones. The cost for testing of bearing capacity of soil for various sites for proposed water works and site clearance and other unforeseen items are included in this rate. |
| 5 | C.I. D/F pipe - Inlet 150 mm dia |
| 6 | C.I. D/F pipe - Inlet 150 mm dia |
| 7 | C.I. D/F pipe - Inlet 200 mm dia |
| 8 | C.I. D/F pipe - outlet 400 mm dia |
| 9 | C.I. D/F pipe - overflow 350 mm dia |
| 10 | C.I. D/F pipe - washout 150 mm dia |
| 11 | For Proposed OHT |
| 12 | 1300 KL/18 M staging |
| 13 | Rising Main and Appurtenant Works |
| 14 | Supply of following sizes of DI pipes, class K - 9 with rubber gasket, conforming to IS: 8329, F.O.R. destination (store at Garhmukteshwar) including all taxes and insurance etc. complete for proposed tube wells. |
| 15 | 200mm dia |
| 16 | 150mm dia |
| 17 | Supply and fixing of specials etc.(10% of above DI item) |
| 18 | Excavation for pipeline trenches in ordinary soil (loam, clay or sand) including lift upto 1.5 m and lead upto 50 m and refilling, watering, ramming of excavated earth in to the trenches and disposal of surplus earth upto 50 m from the center of the trenches |
| 19 | Laying, jointing, carting of following sizes of D.I. Pipes (class K - 9) and A.C. pipes (class-15) and specials to the site of work, lowering them in to trenches and laying true to alignment and gradient including testing of pipeline (but excluding cost of trenching and cuttling of pipes etc. for making of lengths but including making joints). |
| 20 | D.I. (K-9) pipes |
| 21 | 200 mm dia |
| 22 | 150mm dia |
| 23 | Supply& fixing of following sizes of C.I. Double flanged sluice valves as per I.S: 780/1969 class - 1 F.O.R. destination including all taxes and insurance. |
| 24 | 200 mm dia. |
| 25 | 150mm dia |
| 26 | Supply of all materials, labour, T & P etc. and construct following valve chambers. |
| 27 | Sluice valve chambers (up to 200mm Dia) |
| 28 | Dismantling of roads for laying of pipe line including sorting out and stacking of serviceable materials,stacking and disposal of unserviceable materials upto a distance of 50 m. |
| 29 | Bituminousroad |
| 30 | Cement concrete road |
| 31 | Concrete Tile Road |
| 32 | Reinstatement of following type of roads Which dismantled during laying of pipe line,road reinstatement should be done same as during cutting of the road including supply of all materials, labour and T & P etc. required for proper completion of the work. |
| 33 | Bituminous road |
| 34 | Cement concrete road |
| 35 | Concrete Tile road |
| 36 | Supply of all materials, labour, and T & P etc. and construct R.C.C. thrust blocks. |
| 37 | R.C.C. work in 1:1.5:3. |
| 38 | Mild steel work |
| 39 | Site clearance and other unforeseen items. |
| 40 | Distribution system,House Service Connections & appurtenant works |
| 41 | (A) Distribution system & appurtenant works |
| 42 | Supply of the following D.I. pipes (K-7) conforming to I.S -8329/2000 or its latest amendment(s). Including F.O.R. destinations rate per metre in Rs., anywhere in U.P. including cost of one Rubber Gasket per pipe length & iniclusive of all Taxes & Duties, Third Party Inspection Charges, Packing & Forwarding Charges, Transit Insurance Charges, Road Transportation Charges etc. |
| 43 | 200 mm dia |
| 44 | 250 mm dia |
| 45 | 300 mm dia |
| 46 | 350 mm dia |
| 47 | 400 mm dia |
| 48 | Supply of the following HDPE Pipes as per B.I.S. code no. 4984/2016 or its latest amendment including cost of 1 HDPE coupler per pipe length and inclusive of all taxes and duties, 3rd party inspection charges, packing and forwarding charges, trasnit insurance charges, road transportation charges etc. F.O.R. destination etc. complete. |
| 49 | 110 mm dia HDPE pipe PN 6: class PE 100 |
| 50 | 140 mm dia HDPE Pipe PN‐6: Class PE‐100 |
| 51 | 160 mm dia HDPE Pipe PN‐6: Class PE‐100 |
| 52 | Supply of D.I. specials for the above Pipes.(10% of above DI item) |
| 53 | Supply of HDPE specials for HDPE Pipes. (5% of above HDPE item) |
| 54 | Excavation of earth for pipe line trenches in ordinary soil(loam, clay, or sand) including lift upto 1.5m and lead upto 50m and refilling, watering, ramming of excavated earth into the trenches & disposal of surplus earth upto 50m from the center of the trenches |
| 55 | Carting of following pipes, specials and fittings from site store to site of work, lowering them into trenches, laying true to alignment and gradient, laying and jointing of pipe line including cutting of pipe for making up lengths as required for proper completion of work |
| 56 | 200mm dia D.I. (K-7) pipes |
| 57 | 250mm dia D.I. (K-7) pipes |
| 58 | 300mm dia D.I. (K-7) pipes |
| 59 | 350mm dia D.I. (K-7) pipes |
| 60 | 400mm dia D.I. (K-7) pipes |
| 61 | 110mm O.D. HDPE pipes |
| 62 | 140mm O.D. HDPE pipes |
| 63 | 160mm O.D. HDPE pipes |
| 64 | Supply and fixing of following fittings including cartage of materials, labour, T&P etc. complete |
| 65 | Sluice/wheel valve |
| 66 | 250 mm dia |
| 67 | 200 mm dia |
| 68 | 150 mm dia |
| 69 | 125 mm dia |
| 70 | 100 mm dia |
| 71 | Scour Valve |
| 72 | Scour valve - 100 mm dia |
| 73 | Air Valve |
| 74 | Air valve - 20 mm dia (single/double ball type) |
| 75 | Fire hydrant - 80 mm dia. |
| 76 | Supply of all labour, materials, T&P etc. all complete and construction of following valve chambers as per type design |
| 77 | Sluice/Wheel Valve/Scour Valve (Surface Box Type) |
| 78 | Sluice/Wheel Valve/Scour Valve (Masonry Type) |
| 79 | Air valve |
| 80 | Fire hydrant |
| 81 | Supply of all labour, materials, T&P etc. all complete and inter - connecting existing system with the proposed distribution network at various points. |
| 82 | Supply of all labour, materials, T&P etc. all complete and disconnecting existing system to segregate zonal distribution network at various points. |
| 83 | Surveysite Investigation Planning, design Drawings (crossing length 15m to 25m ), Road for of required dia Rising main and distribution pipe with casing pipe as required for proper completion of work required size of MS casing pipe as per drawing and as per (IS:3589 & made from confining to IS:2062) with 750 Micron PU coating internally and 250 micron anti corrosive bituminous paint externally by trenchless technology method at an average depth 3.60 mtr from normal ground level up to top of casing pipe including excavation & filling of Pit, Dewatering arrangement, Supporting system for soil,all complete work including supply & fixing specials in carrier pipe over main pipe, including supply of all materials, labour T&P etc. for proper completion of work as per instruction of Engineer. |
| 84 | Drain crossing up to 1.50 width |
| 85 | Drain crossing up to 1.50-3.0 width |
| 86 | (B) House Connections |
| 87 | Provision of new house water tap connection including dismantling of road and its reinstatement all complete |
| 88 | BOE Road |
| 89 | Upto 110mm dia |
| 90 | CC Road |
| 91 | Upto 110mm dia |
| 92 | For 180mm to 250mm dia |
| 93 | Bituminous Road |
| 94 | Upto 110mm dia |
| 95 | For 125mm to 160mm dia |
| 96 | For 180mm to 250mm dia |
| 97 | Interlocking Road |
| 98 | Upto 110mm dia |
| 99 | For 125mm to 160mm dia |
| 100 | For 180mm to 250mm dia |
| 101 | Kaccha Road |
| 102 | Upto 110mm dia |
| 103 | For 125mm to 160mm dia |
| 104 | For 180mm to 250mm dia |
| 105 | Dismantling of roads for laying of pipe line including sorting out and stacking of serviceable materials, stacking and disposal of unserviceable materials upto a distance of 50 m. |
| 106 | Bituminous road |
| 107 | Cement Concrete Road |
| 108 | Interlocking C.C. Tiles |
| 109 | Earthen Road |
| 110 | Reinstatement of following type of roads Which dismantled during laying of pipe line,road reinstatement should be done same as during cutting of the roadincluding supply of all materials, labour and T & P etc. required for proper completion of the work. |
| 111 | Bituminous road |
| 112 | Cement Concrete Road |
| 113 | Interlocking C.C. Tiles |
| 114 | Earthen Road |
| 115 | Site Development works (Boundary wall, Gate, Rain water Harvesting,internal road, land scapping and BW repairing works |
| 116 | Supply of all labour, materials and T & P etc. and construct boundary wall at following sites. |
| 117 | Supply of all labour, materials and T & P etc. and provide 3.6 m wide M.S. gate and 1 m wide wicket gate with pillars as per departmental type design, at following sites. |
| 118 | water works site |
| 119 | Supply of all labour, materials and T & P etc. and construct Cement Inter locking Tiles pavement inside following water works compound. |
| 120 | water works site |
| 121 | Reinstatement works |
| 122 | Rain water harvesting works |
| 123 | i) OHT campus |
| 124 | ii) Pump House site |
| 125 | Land scapping ,plantation work in water works campus. |
| 126 | Construction of Master Control Station / SCADA Room including supply of all material, labour, T & P etc. required for proper completion of work as per Unit Estimate & Type Design |
| 127 | PART (B) - E&M WORKS |
| 128 | Drilling of borehole for Tubewell contruction by RC Rig Machine including transportation, erection, dismantling of Rig and assoiated T & P complete in all respect including required all material, labour etc. |
| 129 | Transportation, Erection and Dismantling of Rig Machine |
| 130 | Drilling of 600mm size bore from GL to 60 BGL |
| 131 | Drilling of 500mm size bore from |
| 132 | 60M BGL to 100MBGL |
| 133 | 100M BGL to 135MBGL |
| 134 | Tubewell Assembly |
| 135 | M.S. tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structer etc. As required & as per typed design complete in all respect. |
| 136 | 300 mm. Dia MS ERW Housing/ casing pipe having wall thickness of 7.1mm. |
| 137 | 200 mm. Dia MS ERW slotted/ casing pipe having wall thickness of 7.1mm. |
| 138 | Supply of pea gravel |
| 139 | Logging of bore hole by departmental / approved electric logger. |
| 140 | Lowering of Tube well assembly duly welded including welding electrode and shurounding of pea gravel complete in all respect. |
| 141 | Lowering of 300mm dia pipe from GL to 54m deep BGL. |
| 142 | Lowering of 200mm dia pipe from 54 to 100m deep BGL. |
| 143 | Lowering of 200mm dia pipe from 100 to 120m deep BGL. |
| 144 | Development of Tubewell by compressor |
| 145 | Transportation, Installation and Dismantling of 250 PSI Compressor |
| 146 | Development of Tubewell by 250 PSI Capacity Air compressor |
| 147 | Development of Tubewell by O.P. Unit |
| 148 | Transportation, Installation and Dismantling of 1 Cusec O.P. Unit & Yield Test. |
| 149 | Development of Tubewell by 1 Cusec Capacity by O.P. Unit |
| 150 | Chemical and Bacterological test of water sample from depaprtmental/ approved lab. |
| 151 | PUMPING PLANT FOR NEW TUBEWELL NO 1 (OLD DEFUNCT OHT) |
| 152 | SITC of Submersible Pumping Plant with 24m column pipe assembly,NRV,bend,Tee, D/F pipe, earthing, painting, Toolset, power wiring of pump house internal and external chain pulley block and all pumping plant accesssories with nut bolt ,rubber packing etc 1100 LPM, 62 m head, 25 HP orsuitable capacity. |
| 153 | Soft starter with RS-485 port-400V Class 22 Kw rating or above as per site requirement. |
| 154 | Capacitor Bank 10 KVAR with Relay |
| 155 | 01 KVAR UPS at TW Panel |
| 156 | 100 mm size motor operated actuator with Sluice valve |
| 157 | 3 Mtr. long heavy duty size 100mm dia column pipe same as above spare. |
| 158 | CE & UL certified Inteligent Smart Energy Meter |
| 159 | CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. |
| 160 | CE & UL certified pressure transmitter |
| 161 | Auto phase reversal unit with inbuilt time delay 125 amp |
| 162 | Motor operated Actuators with Sluice valve of size upto 100 mm. at Main line and Bye-pass line of Tubewell. |
| 163 | CE & UL certified Electromagnatic Flowmeter suitable for above line size 100 mm. |
| 164 | Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT . |
| 165 | Copper cable size 2x3cx6 sq mm. flat for 18 m extra column pipe. |
| 166 | Supply & Laying of PVC insulated Al. armoured cable size 1x3.5/4Cx35 sq mm. from transformer LV side to meter panel and meter panel to starter. |
| 167 | SITC of Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-6 LPH ( pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 200 ltr capacity HDPE tank (02 nos., 1W+1S) ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%) with RS 485 Port O/P having facility of interface with PLC SCADA system. |
| 168 | SITC of 03 Phase Servo Voltage Stabilizer 40 KVA. |
| 169 | PUMPING PLANT FOR NEW TUBEWELL NO 2 (NEAR POND) |
| 170 | SITC of Submersible Pumping Plant with 24m column pipe assembly,NRV,bend,Tee, D/F pipe, earthing, painting, Toolset, power wiring of pump house internal and external chain pulley block and all pumping plant accesssories with nut bolt ,rubber packing etc 1100 LPM, 63 m head, 25 HP orsuitable capacity. |
| 171 | Soft starter with RS-485 port-400V Class 22 Kw rating or above as per site requirement. |
| 172 | Capacitor Bank 10 KVAR with Relay |
| 173 | 01 KVAR UPS at TW Panel |
| 174 | 100 mm size motor operated actuator with Sluice valve |
| 175 | 3 Mtr. long heavy duty size 100mm dia column pipe same as above spare. |
| 176 | CE & UL certified Inteligent Smart Energy Meter |
| 177 | CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. |
| 178 | CE & UL certified pressure transmitter |
| 179 | Auto phase reversal unit with inbuilt time delay 125 amp |
| 180 | Motor operated Actuators with Sluice valve of size upto 100 mm. at Main line and Bye-pass line of Tubewell. |
| 181 | CE & UL certified Electromagnatic Flowmeter suitable for above line size 100 mm. |
| 182 | Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT . |
| 183 | Copper cable size 2x3cx6 sq mm. flat for 18 m extra column pipe. |
| 184 | Supply & Laying of PVC insulated Al. armoured cable size 1x3.5/4Cx35 sq mm. from transformer LV side to meter panel and meter panel to starter. |
| 185 | SITC of Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-6 LPH ( pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 200 ltr capacity HDPE tank (02 nos., 1W+1S) ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%) with RS 485 Port O/P having facility of interface with PLC SCADA system. |
| 186 | SITC of 03 Phase Servo Voltage Stabilizer 40 KVA. |
| 187 | PUMPING PLANT FOR NEW TUBEWELL NO 3 (PROPOSED OHT CAMPUS) |
| 188 | SITC of Submersible Pumping Plant with 24m column pipe assembly,NRV,bend,Tee, D/F pipe, earthing, painting, Toolset, power wiring of pump house internal and external chain pulley block and all pumping plant accesssories with nut bolt ,rubber packing etc 1100 LPM, 60 m head, 25 HP orsuitable capacity. |
| 189 | Soft starter with RS-485 port-400V Class 22 Kw rating or above as per site requirement. |
| 190 | Capacitor Bank 10 KVAR with Relay |
| 191 | 01 KVAR UPS at TW Panel |
| 192 | 100 mm size motor operated actuator with Sluice valve |
| 193 | 3 Mtr. long heavy duty size 100mm dia column pipe same as above spare. |
| 194 | CE & UL certified Inteligent Smart Energy Meter |
| 195 | CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. |
| 196 | CE & UL certified pressure transmitter |
| 197 | Auto phase reversal unit with inbuilt time delay 125 amp |
| 198 | Motor operated Actuators with Sluice valve of size upto 100 mm. at Main line and Bye-pass line of Tubewell. |
| 199 | CE & UL certified Electromagnatic Flowmeter suitable for above line size 100 mm. |
| 200 | Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT . |
| 201 | Copper cable size 2x3cx6 sq mm. flat for 18 m extra column pipe. |
| 202 | Supply & Laying of PVC insulated Al. armoured cable size 1x3.5/4Cx35 sq mm. from transformer LV side to meter panel and meter panel to starter. |
| 203 | SITC of Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-6 LPH ( pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 200 ltr capacity HDPE tank (02 nos., 1W+1S) ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%) with RS 485 Port O/P having facility of interface with PLC SCADA system. |
| 204 | SITC of 03 Phase Servo Voltage Stabilizer 40 KVA. |
| 205 | ELECTRICAL / MECHANICAL WORKFOR NEW OVERHEAD TANK |
| 206 | Motor operated Actuators with Sluice valve of size 400 mm. at distribution line |
| 207 | CE & UL certified Electomagnetic Flowmeter for OHT line size 400 mm. dia |
| 208 | CE/UL Certified suitable capacity UPS with batteries. |
| 209 | Chlorine Analyzer range 0-5ppm (electrolyte with membrane cap; Type- Amperometric with PH Compensator |
| 210 | S.I.T.C OF SCADA SYSTEM ON NEW TUBEWELL 1, 2 & 3 |
| 211 | CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. |
| 212 | G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. |
| 213 | CE & UL certified 7\" HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. |
| 214 | Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) |
| 215 | CE & UL certified Surge protector for above control panel |
| 216 | Installation, commissioning & testing for tubewell |
| 217 | Trial run for three month period for tubewell |
| 218 | SCADA WORKS ON NEW OHT |
| 219 | CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations |
| 220 | G.S.M./G.P.R.S. based wireless communication with 5G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges . |
| 221 | CE/UL certified Radar type Level Transmitter for Over haead Tank for Eisting OHT. |
| 222 | MASTER CONTROL CENTERE (MCS) |
| 223 | CE/UL & BIS Certifed industrial grade LED MONITOR with latest configuration |
| 224 | (i) 65\" (upto 50 Tubewells). |
| 225 | Desktop/PC with i5/i7 processor for |
| 226 | CE/UL Certified 5KVA UPS with batteries . |
| 227 | Full development version of required TAGS SCADA Software with coustomization of sowftware for MCS as per requirement . |
| 228 | CE/UL Certified master control room PLC with redundant CPU & power supply at MCS in IP54 enclouser |
| 229 | CE/UL Certified Field gateway agent for transfering data from MCS to Central control room. |
| 230 | GSM based wireless/Broaband/Equipment communication system for PLC capable to transfer & received data & gather data from remote sites to control satation, All accessories included signal enhancer antenna along with running expences, till DLP. |
| 231 | CE/UL Certified Firewall for network protection. |
| 232 | SURGE PROTECTOR FOR ETHERNET communication protection. |
| 233 | CE/UL certified industrial grade Ethernet Switch. |
| 234 | Mobile App Facility system architecture with mobile (industries internet based & viewed through mobile apps for increased local & Remote Visibility). |
| 235 | Canon/HP or equivalent Laser Printer 1018 or equivement. |
| 236 | Security surveillance IP camera with recorder |
| 237 | Installion, Commissioning & testing including required furniture, A/c etc. |
| 238 | 03 MONTH TRIAL & RUN FOR PUMPING PLANT OF TUBEWELL |
| 239 | 03 Month trial & run of Pumping Plant for 03 Nos. tubewell including liquid Chlorine, Operating Staff. Excluding Electricity Charges. |
| 240 | 03 MONTH TRIAL & RUN FOR MCS |
| 241 | 03 Month trial & run of MCS including Operating Staff. Excluding Electricity Charges. |
