Tender For Fabrication And Supply Of Ibr And Non Ibr Attachments For Various Piping Pgmas, Tiruchirappalli-Tamil Nadu

Fabrication And Supply Of Ibr And Non Ibr Attachments For Various Piping Pgmas , Machining Of Flat End Closure Upto Od 325 Mm And Thickness Upto 50 Mm From Plates - Ibr (Cs/Gr12/Gr22) , Machining Of Flat End Closure Above Od 325 Mm Upto Od 620 Mm And Thickness Upto 100 Mm From Plates - Ibr (Cs/Gr12/Gr22) , Matching Piece / Stub/ End Cap / Reducer / Orifice/Flat End Closure -Madeout Of Forgings/Rod Diaupto 80 Mm Length Less Than 100 Mm - Ibr (Sa105/F12/F22) , Matching Piece / Stub/ End Cap / Reducer / Orifice/Flat End Closure -Madeout Of Forgings/Rod Diaupto 80 Mm Length Above 100 Mm Less Than 250 Mm - Ibr (Sa105/F12/F22) , Matching Piece / Stub/ End Cap/ Reducer / Orifice/Flat End Closure -Madeout Of Forgings/Rod Dia Above Od 80 Mm Upto Od 140 Mm Length Less Than 100 Mm - Ibr (Sa105/F12/F22) , Matching Piece / Stub/ End Cap/ Reducer / Orifice/Flat End Closure -Madeout Of Forgings/Rod Dia Above Od 80 Mm Upto Od 140 Mm Length Above 100 Mm Less Than 250 Mm - Ibr (Sa105/F12/F22) , Matching Piece / Stub/ End Cap/ Reducer / Orifice/Flat End Closure -Madeout Of Forgings/Rod Dia Above Od 140 Mm Upto Od 200 Mm Length Less Than 100 Mm- Ibr (Sa105/F12/F22) , Matching Piece / Stub/ End Cap/ Reducer / Orifice/Flat End Closure -Madeout Of Rod Dia Above Od 140 Mm Upto Od 300 Mm Length Less Than 500 Mm - Ibr (Sa105/F12/F22) , Matching Piece / Stub/ End Cap / Reducer / Orifice/Flat End Closure -Madeout Of Forgings/Rod Diaupto 80 Mm Length Less Than 100 Mm - Ibr (F91/F92/Ss) , Matching Piece / Stub/ End Cap/ Reducer / Orifice/Flat End Closure -Madeout Of Forgings/Rod Dia Above Od 80 Mm Upto Od 140 Mm Length Less Than 100 Mm - Ibr (F91/F92/Ss) , Matching Piece / Stub/ End Cap/ Reducer / Orifice/Flat End Closure -Madeout Of Forgings/Rod Dia Above Od 80 Mm Upto Od 140 Mm Length Above 100 Mm Less Than 250 Mm - Ibr (F91/F92/Ss) , Matching Piece / Stub/ End Cap/ Reducer / Orifice/Flat End Closure -- Madeout Of Forgings/Pipe/Rod Dia Above Od 140 Mm Upto Od 300 Mm Length Less Than 500 Mm -Ibr (F91/F92/Ss) , Matching Piece/Stubs/ Reducer From Forgings/Pipe/Rod Above Dia 220 Mm Upto 500 Mm And Length Less Than 700 Mm - Ibr (Sa105/F12/F22) , Screw Plug/ Plug R / Rg Plug From Rod Dia Up To 100 Mm - Ibr (Sa105/F12/F22) , Screw Plug/ Plug R / Rg Plug From Rod Dia Up To 80 Mm-Ibr (F91/F92/Ss) , Profile & Ep Machining (No Id/Od Machining) Of Pipe Upto Od 120 Mm And Thk Up To 25 Mm- Ibr (Cs/P12/P22) , Profile & Ep Machining (No Id/Od Machining)Of Pipe Above Od 120 Mm Upto Od 325 Mm And Thk Up To 25 Mm- Ibr (Cs/P12/P22) , Profile & Ep Machining (No Id/Od Machining)Of Pipe Above Od 325 Mm Upto Od 600 Mm And Thk Up To 25 Mm- Ibr (Cs/P12/P22) , Ep/Machining-Carrier Plate Upto Thk 40 Mm And Length Upto 300 Mm- Machined Out Of Plate Of Equivalent Thickness Of Item- Nonibr (Cs/Gr12/Gr22) , Ep/Machining -Carrier Plate Upto Thk 40 Mm And Length Upto 300 Mm- Machined Out Of Plate Of Equivalent Thickness Of Item- Nonibr (Gr91/Gr92/Ss) , Ep/Machining -Carrier Plate Upto Thk 40 Mm And Length Upto 300 Mm- Machined Out Of Pipe Of Equivalent Thickness Or Greater Than Item Thickness Up To 20 Mm- Nonibr (Gr91/Gr92/Ss) , Profile & Ep Machining (No Id/Od Machining) Of Pipe Below Od 330 Mm And Thk Up To 60 Mm - Nonibr (Cs/P12/P22) , Profile & Ep Machining (No Id/Od Machining) Of Pipe Above Od 330 Mm And Upto Od 720 Mm And Thk Up To 60 Mm - Nonibr (Cs/P12/P22) , Profile & Ep Machining (No Id/Od Machining) Of Pipe Upto Od 720 Mm And Thk Upto 65 Mm- Nonibr (P91/P92/Ss) , Tapper Profile Machining (No Id/Od Machining) Of Support Pipe With Tapper Upto Od 720 Mm And Thk Below 60 Mm - Nonibr (P91/P92/Ss) , Profile, Ep & Od/Idmachining Of Pipeabove Dia 88.9 Mm And Up To Dia 350 Mm And Thk Below 50 Mm And Length Below 200 Mm - Nonibr (Cs/P12/P22) , Profile, Ep & Od/Idmachining Of Pipe Above Dia 88.9 Upto 220 Mm And Thk Upto 50 Mm And Length Upto 200 Mm - Nonibr (Gr91/Gr92/Ss) , Profile, Ep & Od/Idmachining Of Pipe Above Dia 220 Mm And Up To Dia 460 Mm And Thk Above 50 Mm Below 80 Mm And Length Below 200 Mm - Nonibr (Gr91/Gr92/Ss) , Cut To Size Of Plate / Sheet / Blankdu Per Piece Weighing Up To 200 Kg - Nonibr (Cs/Gr12/Gr22) , Cut To Size Of Plate / Sheet / Blank Du Per Piece Weighing Up To 200 Kg - Nonibr (Gr91/Gr92/Ss) , Lug / Bracket Platedu Per Piece Weighing Up To 500 Kg - Nonibr (Cs/Gr12/Gr22) , Lug / Bracket Platedu Per Piece Weighing Up To 500 Kg - Nonibr (Gr91/Gr92/Ss) , Orifice Platedu Per Piece Weighing Up To 500 Kg - Ibr (Cs/Gr12/Gr22) , Orifice Platedu Per Piece Weighing Up To 500 Kg - Ibr (Gr91/Gr92/Ss) => Limited

Refer document

Refer document

Refer document