|
| 1 | Earth work in excavation in trenches for foundationsand pipes cables etc in ordinary soil (loan clay or sand) including lift upto 1.5 m, leadupto 50 m anddressingof sidesand ramming of bottom anddisposal of surplusexcavated earth as directed by the Engineer- in- charge with in alead of 50m . (Including cost of all material labour T&P and Excluding GST) |
| 2 | Fillingof available excavated earth in trenches,plinth,sides of foundation, etc.in layersnot exceeding 20 cms in depth in layersnot exceeding 20 cms in depth consolidating eachdepositedlayer by ramming andwateringincluding lead upto 50m and lift upto 1.5m(Including cost of all material labour T&P and Excluding GST) |
| 3 | Providing and layingin cement concrete 1:4:8 (1 cement :4 coarse sand :8stone grit 40 mm nominal size) and curing complete,including cost ofform- work,in foundation and floors.(Including cost of all material labour T&P and Excluding GST) |
| 4 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8km from the site of work and including watering dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of the work.(Including cost of all material labour T&P and Excluding GST) |
| 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground withing 50 meters lead.(Including cost of all material labour T&P and Excluding GST) |
| 6 | Removing dry or oi bounddistemper, water proofing cement paintand the Ilke by scrapping, Sand papering andpreparing thesurface Smooth including necessary repairs to scratches etc. complete.(Including cost of all material labour T&P and Excluding GST) |
| 7 | Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by Engineer-in-charge with in a distance of 60mt. (200 feet)(Including cost of all material labour T&P and Excluding GST) |
| 8 | Dismantling & Removal of old existing electrification works(Including cost of all material labour T&P and Excluding GST) |
| 9 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand(Including cost of all material labour T&P and Excluding GST) |
| 10 | Plastering on ceiling and soffits of stairs 6 mm cement plaster of mix : 1 cement : 3 fine sand(Including cost of all material labour T&P and Excluding GST) |
| 11 | Providing andapplying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(Including cost of all material labour T&P and Excluding GST) |
| 12 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cementprimerofapprovedbrand&manufacturesuchas Berger A N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also includingpreparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of aII matarial (inside walls)(Including cost of all material labour T&P and Excluding GST) |
| 13 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @1.43 Itr/10 sqm over and including priming coat of exterior primer applied P 0.90 litre/lOs m(Including cost of all material labour T&P and Excluding GST) |
| 14 | Dismantling doors, windows and clerestory windows (steelor wood) shutter including chowkhats, architrave, holdfastsetc. complete and stacking within 50 metres lead : Of area beyond meres(Including cost of all material labour T&P and Excluding GST) |
| 15 | Demolishing brick work manually/bymechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead asper direction of Engineer-in-charge.Incement mortar(Including cost of all material labour T&P and Excluding GST) |
| 16 | Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth are a of the building at around. floor only shall be measured as per I.S.6313 (Partll1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsions hall be asfollows:(1) Treatment for masonary & foundation 5 liters pers qm.(2) Back fillinimmediate contact with foundation 7.5 liters/sqm (3)Treatment of top surface of (4) Treatment of soil along external perimeter of building 7.5 liters/sqm.(5) Treatment of soil under apron along external erimter 5 liters/sqm(Including cost of all material labour T&P and Excluding GST) |
| 17 | 1M-150 brick work in1:4 (one cemen tand fourcoarse sands and of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T&P etc required for proper completion of the work.(Including cost of all material labour T&P and Excluding GST) |
| 18 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and sizes in:Cement mortar 1:6 (1 cement :6 coarse sand)(Including cost of all material labour T&P and Excluding GST) |
| 19 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarses and :4 graded stone aggregate 12.5mm nominal size(Including cost of all material labour T&P and Excluding GST) |
| 20 | Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.(Including cost of all material labour T&P and Excluding GST) |
| 21 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).(Including cost of all material labour T&P and Excluding GST) |
| 22 | Reinforced cement concrete work in beams,lintels suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).(Including cost of all material labour T&P and Excluding GST) |
| 23 | TMT Bar or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping &hooks Fe 500(Including cost of all material labour T&P and Excluding GST) |
| 24 | 15mm plinth plaster (1 cement : 4 coarse sand)(Including cost of all material labour T&P and Excluding GST) |
| 25 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(Including cost of all material labour T&P and Excluding GST) |
| 26 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(Including cost of all material labour T&P and Excluding GST) |
| 27 | Providing and Laying vitrified floor tiles in difference size (thickness specified by manufacturer) with water absorption less than 0.8% and confirming to IS 15622 of approved make in all colors and shade laid on 20mm thick cement mortar 1:4 (Icement 4 coarse sand) including grouting the joints with white cement and matching pigments etc complete size of tiles 600x600mm.(Including cost of all material labour T&P and Excluding GST) |
| 28 | Providing and Laying vitrified floor tiles in difference size (thickness specified by manufacturer) with water absorption less than 0.8% and confirming to IS 15622 of approved make in all colors and shade laid on 20mm thick cement mortar 1:4 (Icement 4 coarse sand) including grouting the joints with white cement and matching pigments etc complete size of tiles 600x600mm.(Including cost of all material labour T&P and Excluding GST) |
| 29 | Disposal of building rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead for all leads including all lifts involved.(Including cost of all material labour T&P and Excluding GST) |
| 30 | Providing and fixing factory made 30mm thick door shutter made of solid PVC foam profile. The styles rails shall be of size 75mm x30mm having wall thickness 5mm. The styles, top & bottom rails shal have one side wall thickness of 15mm integrail extruded on the hinge side of the profile for better screw holding power. the styles and rails shall be reinforced with M.S. tubes of size 33mmx17mmx1mm painted with primer all four corners of reinforcement to be welded or sealed solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel, the styles and rails will be mtred cut and joint with the help of PVC solvent cement & self driven self tapping scews single piece extruded solid PVC lock rail of size 100mm x 30mm with wall thickness 5mm & 15mm integrally extruded in the middle of the lock rail & self driven self tapping screws of size 100mm X8mm complete as per manufacturers specifications and direction of Enginer-in-charge Non decorative finesh (Toilet doors)(Including cost of all material labour T&P and Excluding GST) |
| 31 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5mm made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of ISO mm long brackets of 15x15 mm M.S. square tube the vertical door frame profiles to bereinforced with 19x19 mm M.S. square tube of19gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall usiog M.S. screws gf 65/100 mm size, complete as per manufacturers specification and direction of Engineerin- Charge.(Including cost of all material labour T&P and Excluding GST) |
| 32 | Supply & fixing of flush door commercial quality conforming to I.S.2202 Part I (1983) including fixing of wooden cleats& stopper and including fixing and adjustment of hinges, Bolts locks, handles, springs, fitting with necessary screws to be supplied departmentalIy. Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS:2202 (PartI) Both Side Laminated (25mm thick)(Including cost of all material labour T&P and Excluding GST) |
| 33 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in positionwith hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).(a) Sai wood (Including cost of all material labour T&P and Excluding GST) |
| 34 | Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating notless than grade AC 10 asper IS: 1868) transparent or dyed to required colouror shade with nuts and screws etc complete.fal 250mmx16mm.(Including cost of all material labour T&P and Excluding GST) |
| 35 | Providing and fixing stainless steel tower bolts (barrel type) with necessary screws etc.complete (a) 250mm x 10mm(Including cost of all material labour T&P and Excluding GST) |
| 36 | Providing and fixing stainless steel tower bolts (barrel type) with necessary screws etc.complete (b) 200mm x 10mm(Including cost of all material labour T&P and Excluding GST) |
| 37 | Providing and fixing stainless steel handles withs crews etc. complete (a) 125mm(Including cost of all material labour T&P and Excluding GST) |
| 38 | Providing and fixing150mm bright finished floor brass door stopper with rubber cushion, necessary brasss crews etc. to suit shutter thickness complete.(Including cost of all material labour T&P and Excluding GST) |
| 39 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701mm to1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.(Including cost of all material labour T&P and Excluding GST) |
| 40 | Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3, Hi- loss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for propercompletion of the work.(Including cost of all material labour T&P and Excluding GST) |
| 41 | Providing, assembling and supplying vision glass panels (IGUs)comprising of hermetically-sealed 6-12- 6 mm insulated glass(double glazed) vision panel units of size and shape as required andspecified,comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 3 of approved colour and shade, an inner Heat strengthned clear float glass 6 mm thick, spacer tube 12 mm wide,dessicants, including primary seal and secondary seal (structural silicone sealant) etc.all complete for the required performances, asper the Architectural drawings, as per the approved shop drawings,as specified and as directed by the Engineer- in-Charge. The lGIJs shall be assembled in the factory/ workshop of the glass processor.(Including cost of all material labour T&P and Excluding GST) |
| 42 | Fixed window/ ventilator with mullion / transom. Using RI series with frame (33 mm & above ) x(35 mm & above) & mullion (33 mm& above) x (50 mm & above). (Height upto 0.90 metre)(Including cost of all material labour T&P and Excluding GST) |
| 43 | P/F straight Grab bars instainless steel32 mm dia,60mm ciearance and600mm Iong(Including cost of all material labour T&P and Excluding GST) |
| 44 | P/F drop down Grab bars instainless steel 32mm dia.(Including cost of all material labour T&P and Excluding GST) |
| 45 | Providing and laying tile (for vision impaired persons as perstandards) of size 300x300x9.8 mm having with wat4r absorptionless than 0.S°4 and conforming to IS:15622 of approved make in all colours and shades in for out door floors such as footpath, court yard,multi modals location etc., laidon 20mm thick base of cement mortar (1 cement 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc.complete as per direction of Engineer-in-charge(Including cost of all material labour T&P and Excluding GST) |
| 46 | Providing and fixing stainless steel ( Grade 304) railing made ofHollow tubes, channels, plates etc., including welding, grinding,buffng, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and boltscomplete, i/c fixing the railing with necessary accessories &stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(Including cost of all material labour T&P and Excluding GST) |
| 47 | Providing and laying integral cement based water proofing treatment including preparation of surface required for treatment of roofs,balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to lS.2645 and approved by Engineer|n-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) laying brick bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge over 20mm thick layer of ement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed jointless cement mortar of mix 1:4 (1 cement :4 coarse sand ) admixed with water proofing compund conforming to IS:2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finising the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) the whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineers-in-charge : with average thickness of 120mm and minimum thickness at khurra as 65mm.(Including cost of all material labour T&P and Excluding GST) |
| 48 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Same as above but for European type W.C. pan with white plastic seat and lid.Make- Cera,Hindware |
| 49 | Providing & fixing toilet paper holder (Including cost of all material labour T&P and Excluding GST) |
| 50 | Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge. 15mm nominal bore (Including cost of all material labour T&P and Excluding GST) |
| 51 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass single hole basin mixer of approved quality and make including painting of fittings and brackets, cutting and making good the walls wherever required.a)White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tappillar tap. (Including cost of all material labour T&P and Excluding GST) |
| 52 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. (Including cost of all material labour T&P and Excluding GST) |
| 53 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. (Including cost of all material labour T&P and Excluding GST) |
| 54 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. (Including cost of all material labour T&P and Excluding GST) |
| 55 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (including angle valve for WC flushing cistern, jet & kitchen sink) 15mm nominal bore (Including cost of all material labour T&P and Excluding GST) |
| 56 | Providing and fixing uplasticised PVC connection pipe with brass unions :30 cm length 15 mm nominal bore (Including cost of all material labour T&P and Excluding GST) |
| 57 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (Including cost of all material labour T&P and Excluding GST) |
| 58 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore (Including cost of all material labour T&P and Excluding GST) |
| 59 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 20 mm nominal outer dia Pipes(Including cost of all material labour T&P and Excluding GST) |
| 60 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc25 mm nominal outer dia Pipes (Including cost of all material labour T&P and Excluding GST) |
| 61 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.20 mm nominal outer dia Pipes (Including cost of all material labour T&P and Excluding GST) |
| 62 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.25 mm nominal outer dia Pipes (Including cost of all material labour T&P and Excluding GST) |
| 63 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 32 mm nominal outer dia Pipes (Including cost of all material labour T&P and Excluding GST) |
| 64 | Providing and fixing brass stop cock of approved quality :For Internal Toilet15 mm nominal bore (Including cost of all material labour T&P and Excluding GST) |
| 65 | Providing and fixing gun metal gate valve with wheel of approved quality.For Vertical pipe connection with terrace rignmaing 15 mm nominal bore (Including cost of all material labour T&P and Excluding GST) |
| 66 | Providing and fixing gun metal gate valve with wheel of approved quality.For Vertical pipe connection with terrace rignmaing 25 mm nominal bore (Including cost of all material labour T&P and Excluding GST) |
| 67 | Providing and fixing gun metal gate valve with wheel of approved quality.For Vertical pipe connection with terrace rignmaing 32 mm nominal bore (Including cost of all material labour T&P and Excluding GST) |
| 68 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. a) 110mm Dia (for rain water) (Including cost of all material labour T&P and Excluding GST) |
| 69 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single Push Fit Coupler 110mm Dia(Including cost of all material labour T&P and Excluding GST) |
| 70 | Providing and fixing of Single Tee with door 110mm DiaComplete (Including cost of all material labour T&P and Excluding GST) |
| 71 | Providing and fixing of Plain bend 87.5 deg 110mm Dia(Including cost of all material labour T&P and Excluding GST) |
| 72 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. a) 110mm Dia (for rain water) (Including cost of all material labour T&P and Excluding GST) |
| 73 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. a) 110mm Dia (for rain water) (Including cost of all material labour T&P and Excluding GST) |
| 74 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. a) 110mm Dia (for rain water) (Including cost of all material labour T&P and Excluding GST) |
| 75 | Providing fixing, jointing and testing uPVC low noise SWR having noise insulation less than 10db at 2Ips flow rate pipe to wall, celling and floor, approved quality, complete, for soil waste & rain water drain including pushfit jointing with seal ring, (i) Single socketed pipesinternal Toilet (Soil & Waste Pipe) 75mm (Including cost of all material labour T&P and Excluding GST) |
| 76 | Providing fixing, jointing and testing uPVC low noise SWR having noise insulation less than 10db at 2Ips flow rate pipe to wall, celling and floor, approved quality, complete, for soil waste & rain water drain including pushfit jointing with seal ring, (i) Single socketed pipesinternal Toilet (Soil & Waste Pipe 110mm (Including cost of all material labour T&P and Excluding GST) |
| 77 | Providing and fixing ofExposed on Wall (Soil & waste pipe) 75mm (for vent) (Including cost of all material labour T&P and Excluding GST) |
| 78 | Providing and fixing ofExposed on Wall (Soil & waste pipe) 110mm (Including cost of all material labour T&P and Excluding GST) |
| 79 | Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised figid PVC pipes including jointing with seal ring leaving 10mm gap for thermal expansion Wend without door (87.5\"\")110mm bend (Including cost of all material labour T&P and Excluding GST) |
| 80 | Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised figid PVC pipes including jointing with seal ring leaving 10mm gap for thermal expansion Wend without door (87.5\"\")75mm bend (Including cost of all material labour T&P and Excluding GST) |
| 81 | Providing and fixing of Bend without door (45\"\") 100mm(Including cost of all material labour T&P and Excluding GST) |
| 82 | Providing and fixing of Bend without door (45\"\") 75mm(Including cost of all material labour T&P and Excluding GST) |
| 83 | Providing and fixingY\" Fitting without door 100mm (Including cost of all material labour T&P and Excluding GST) |
| 84 | Providing and fixingY\" Fitting without door 75mm (Including cost of all material labour T&P and Excluding GST) |
| 85 | Providing and fixing of Single Tee with door 110mm bend (Including cost of all material labour T&P and Excluding GST) |
| 86 | Provinding and fixing Reduced Tee with door 100mm x 75mm (Including cost of all material labour T&P and Excluding GST) |
| 87 | Providing and fixing jointing and testing unplasticzed PVC pipes 10kg/cm2 confirming to IS : 4985 to wall, celling and floor, approved quality, complete, for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc. elbow90 \" 32mm dia pipe (Including cost of all material labour T&P and Excluding GST) |
| 88 | 150 mm nominal size square 100 mm diameter of the inner hinged round grating (including balcony) (Including cost of all material labour T&P and Excluding GST) |
| 89 | Providing and fixing square mouth UPVCS.W.R. Gully trap class SP-1 complete with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 and water tight C.I. cover with frame of 300 x 300mm.size (inside) the weight of cover to be not less than 2.70 Kg as per standard design. a) 150 x 110 mm. size P type With co,,on burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Including cost of all material labour T&P and Excluding GST) |
| 90 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm dia meter (Including cost of all material labour T&P and Excluding GST) |
| 91 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kind of soil Pipes, cables etc exceeding 80mm dia But not exceeding 300mm dia (Including cost of all material labour T&P and Excluding GST) |
| 92 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100mm dia SW pipe (Including cost of all material labour T&P and Excluding GST) |
| 93 | Installation OF SPLIT AC - 1.5TR HITACHI INVERTER, BEE StarRated : 5 star, EER 3.4 (Including cost of all material labour T&P and Excluding GST) |
