|
| 1 | Attending the break down complaint of all nature for window/split AC/tower AC/ cassette AC and their electrical wiring from main DBs of any capacity and make them functional and also carry out the required repair on all days including Sunday and holidays complete all as specified and directed. Notes- (i) Adequate resoures shall be deployed by the contractor for attending complaints being an essential services with adequate Nos of AC mechanic & helpers to attend day to day as per requiremetn and as directed by Engr-in-Charge.(ii) Any parts/ accessories required to be replaced shall be measured and paid separately under respective items of this Schedule/BoQ.(iii) All refrigerator mechanic to be deployed at work should have in possesion of ITI certificate in refrigeration and air conditioning or equivalent trade with at least 03 (Three) years experience in this field.(iv) Complaint should be attend within 2 hrs.(v) If complaint not attended within 2hrs, recovery will be done as follows:-(a) For upto 12 hrs @ Rs 500.(b) for more than beyond 12 hrs @ 1000 Rs per 12 hrs. |
| 2 | M&L for servicing of window type AC of 1.0/1.5/2.0 TR capacity, of any type/make, at site /wall, comprising of taking down carefully, removing power connections and front PVC grills, air filters, cleaning, washing, removing dirt, servicing including chemical wash of cooling coil, indoor cooling unit and condenser coil and providing oil and grease to all moving parts including condensing motor, checking and making serviceable electrical connection of DB\"s, stabilizer, wiring of AC\"s as per site condition and tightening all electrical connection with thimble and replacing the spare parts of the AC units wherever required, testing & commissioning including refixing at the original position and connecting with the system complete all as specified and as directed. Note: Spare parts required for repairs shall be measured and paid separately under respective item of this Schedule/ BoQ. |
| 3 | M&L for servicing of split type AC of 1.5/2.0 TR capacity, of any type/make, at site /wall, including removing power connections and front PVC grills, air filters, cleaning, washing, removing dirt, servicing including chemical wash of cooling coil, cooling unit and condenser coil of outdoor unit, checking and making serviceable electrical connection of DB\"s, stabilizer, wiring of AC\"s as per site condition and tightening all electrical connection with thimble and replacing the spare parts of the AC units wherever required, testing & commissioning including refixing at the original position and connecting with the system complete all as specified and as directed. Notes:- (i) Required and making good of surface as original by plastering/ whitewash/ colour/ distemper etc shall deemed to be included in quoted rate and no extra payment shall be made to contractor on this account. (ii) Contractor shall maintain register of servicing as per format given by Engr-in-Charge duly signed by User, where the servicing of equipment carry out and produce as & when asked by Engr-in-Charge or GE. (iii) Spare parts required for repairs shall be measured and paid separately under respective item of this Schedule/ BoQ. |
| 4 | Supply only in replacement of remote for window/ split type AC any type and any capacity as per existing make/ model at site cpmplete all as specified and directed. |
| 5 | Taking down, repairing and re-fixing PCB, suitable for inverter type type split AC/ window AC ofany capacity and modelcomplete all as specified and directed. |
| 6 | S&F in replacement of PCB, suitable for inverter type, split AC/ window AC of any capacity and model complete all as specified and as directed. |
| 7 | M&L for making necessary arrangement/alteration to make reversible system (reverse valve) to functioning as heat engine in winter i.e. cooling in summer and heating in winter, by providing necessary copper tubing, refrigerant valve, modification in remote unit (PCB) and allied work for the split/ window Air Conditioner of 1.5/2.0 TR capacity complete all as specified and as directed. Note: Charging of refrigerant gas, if required, shall be measured and paid separately. |
| 8 | S&F in replacementsealed compressor unit, reciprocating type/ rotary type/ Scroll type, suitable for 1.5 TR window type AC/ Split AC of existingcapacity and makecomplete all as specified and as directed. |
| 9 | S&F in replacementsealed compressor unit, reciprocating type/ rotary type/ scroll type, suitable for 2.0 TR window type AC/ Split AC of existingcapacity and makecomplete all as specified and as directed. |
| 10 | S&F in replacementwindow AC Kit internal wiring for 1.5 / 2.0 TR capacity AC complete all as specified and as directed. |
| 11 | S&F in replacement Split type AC Kit internal wiring for 1.5 / 2.0 TR capacity AC complete all as specified and as directed. |
| 12 | S&F in replacementdrain pipe PVC medium grade size 25 mm dia including fittings complete all as specified and as directed. |
| 13 | S&F in replacementdrain pipe PVCflexible type 15/20 mm dia including fittings complete all as specified and as directed. |
| 14 | Taking down, repairing and re-fixing PCB, suitable for non inverter type split AC/ window AC ofany capacity and model complete all as specified and directed. |
| 15 | S&F in replacement of PCB, suitable for non-inverter type, split AC/ window AC of any capacity and model complete all as specified and as directed. |
| 16 | S&F in replacementrunning capacitor 50+6 MFD complete all as specified and as directed. |
| 17 | S&F in replacementreplacement running capacitor 45+6 MFD complete all as specified and as directed. |
| 18 | Supply & fixing in replacement capacitor 4 MFD complete all as specified and as directed. |
| 19 | Supply & fixing in replacement Capacitor 6 MFD complete all as specified and as directed. |
| 20 | Supply & fixing in replacement indoor unit swing motor, suitable for split AC of existingcapacity and model complete all as specified and as directed. |
| 21 | Supply & fixing in replacement Split AC Indoor Unit blower motor, single shaft suitable for existingcapacity and make complete all as specified and as directed. |
| 22 | Supply & fixing in replacement Indoor unit Air blower for Split type AC 1.5/2.0 TR complete all as specified and as directed. |
| 23 | Supply & fixing in replacement display suitable for Split type AC/ window type AC of existing make complete all as specified and as directed. |
| 24 | Supply & fixing in replacement Split AC outdoor unit fan motor for any capacity, Single shaft suitable for existingmake and model complete all as specified and as directed. |
| 25 | Taking down repairing/rewinding and fixing Split AC ODU fan motor for any capacity of Single shaft suitable for existingmake and model complete all as specified and directed. |
| 26 | Supply & fixing in replacement fan blade of Condenser motor for Split AC of capacity 1.5TR/2.0 TR complete all as specified and as directed. |
| 27 | Supply & fixing in replacement fan blade of motor for window AC of capacity 1.5TR/2.0 TR complete all as specified and as directed. |
| 28 | Supply & fixing in replacement Motor suitable for window type AC of existing capacity, double shaft complete all as specified & as directed. |
| 29 | Taking down repairing/rewinding and fixingMotor suitable for window type AC of existingcapacity , double shaft complete all as specified & directed. |
| 30 | Supply & fixing in replacement Air blower for Window type AC 1.5/2.0 TR complete all as specified and as directed. |
| 31 | Supply & fixing in replacement cooling coil made out of copper tube & Aluminium fins of window AC 1.5/2.0 Ton complete all as specified and as directed. |
| 32 | Supply & fixing in replacement condenser coil made out of copper tube & Aluminium fins complete of window AC 1.5/2.0 TR as per existing system complete all as specified and as directed. |
| 33 | S&F in replacement of Evaporator Coil made out of copper tube & Aluminium fins, suitable for indoor unit of split AC of capacity 1.5/2.0 TR of existing make and model complete all as specified and as directed. |
| 34 | S&F in replacement of Condenser Coil, size 24 inch and 2 row, made out of copper tube & Aluminium fins, suitable for Outdoor Unit of split AC of capacity 1.5/2.0 TR of existing make and models complete all as specified and as directed. |
| 35 | S&F in replacement of back plate of indoor unit split AC of any capacity complete all as specified and as directed. |
| 36 | S&F in replacement of air filter of any size and make of split AC/ window AC 1.5/2.0 TR capacity complete all as specified and as directed. |
| 37 | Supply & fixing in replacement starting relay suitable for window type AC/ split type AC of existingcapacity and make complete all as specified and as directed. |
| 38 | S&F in replacement of contactor of suitable capacity for split type AC of any capacity complete all as specified and as directed. |
| 39 | Supply and Fixing in replaceement 1.5 sq mm 3 core, PVC insulated & unsheathed (FR) cable 1100 Volts grade with multi stranded, copper conductor allas specified and as directed by engineer in charge . |
| 40 | All as per item No. 39 here in above but 2.5 sqmm size. |
| 41 | All as per item No. 39 here in above but 4.0 sqmm size. |
| 42 | Supply & fixing in replacement flexible copper conductor cable 4.0 Sqmm, 4 core, PVC insulated & PVC sheathedcomplete all as specified and directed. |
| 43 | Supply and charging R-22 refrigerant gas, including and after carrying out the pressure test with nitrogen and rectify the leakage of split AC/window AC/ water cooler/ tower AC/Cassette AC complete all as specified and as directed. |
| 44 | Supply and charging R-134A refrigerant gas, including and after carrying out the pressure test with nitrogen and rectify the leakage of split AC/window AC/ water cooler/ tower AC/Cassette AC complete all as specified and as directed. |
| 45 | Supply and charging R-410A refrigerant gas, including and after carrying out the pressure test with nitrogen and rectify the leakage of split AC/window AC/ water cooler/ tower AC/Cassette AC complete all as specified and as directed. |
| 46 | Supply and charging R-32 refrigerant gas, including and after carrying out the pressure test with nitrogen and rectify the leakage of split AC/window AC/ water cooler/ tower AC/Cassette AC complete all as specified and as directed. |
| 47 | Supply & fixing in replacement front grill as per sample, suitable for existing model of window type AC 1.5TR/ 2.0 TR capacity complete all as specified and as directed. |
| 48 | Supply & fixing in replacement front grill as per sample suitable for 1.5 TR/ 2.0 TR capacity Split type AC complete all as specified and as directed. |
| 49 | S&F in replacementCopper pipe of 1\4\"\" size, thickness 21 SWG,with nitrile rubber insulation complete all as specified and directed. |
| 50 | S&F in replacement Copper pipe of 1\2\"\" size. Thickness 19 SWG, with nitrile rubber insulation complete all as specified and directed. |
| 51 | S&F in replacement Copper pipe of 3\8\"\" size, thickness 21 SWG,with nitrile rubber insulation complete all as specified and directed. |
| 52 | S&F in replacement Copper pipe of 5\8\"\" size. Thickness 19 SWG, with nitrile rubber insulation complete all as specified and directed. |
| 53 | S&F in replacement copper tubing 6/8\" dia & wall thickness 0.039 mm including insulation complete all as specified and directed. |
| 54 | S&F in replacement of Pin/service/ charging valve of size 1/2\", 1/4\"\" for window AC and Split AC of existing model complete all as specified and as directed. |
| 55 | S&F in replacement of outdoor stand of floor mounted type/ Wall mounted type with fastener for split AC complete all as specified and as directed. |
| 56 | M&L for shifting of Split type AC of any capacity, any type/make, with stabilizer including taking down carefully indoor and outdoor unit, copper piping, drain pipe and thermal sleeve, lifting angle etc and installing the same to new location using existing copper piping for suction and delivery with insulation, drain pipe and re-fixing arrangement i. e. lifting angle, fasteners, nut bolt, washer etc, testing & commissioning complete all as specified and directed.Notes: (i) The cost of making hole for passing through inlet/outlet copper pipes, drain pipe and electrical cord and making good of surface at both location as original by plastering / whitewash / colour / distemper etc shall deemed to be included in quoted rate and no extra payment shall be made to contractor on this account. (ii) The additional copper piping & Gas charging, if required shall be measured and paid separately under respective items of this Schedule. |
| 57 | M&L for shifting of window type AC of any capacity, any type/make, with stabilizer from one location to another complete with and including making of suitable opening in brick wall or removing aluminium grill and/or glass pane from existing window, including supply and fixing of new wooden frame of suitable size and thickness for proper fixing of outer chassis of AC at new location, making good of disturbed surface to match with the original, including testing & commissioning complete all as specified and as directed. Note: The cost of making suitable opening in brick wall or removing aluminium grill and/or glass pane from existing window and making good of surface at both location as original by plastering / white wash / colour / distemper etc shall deemed to be included in quoted rate and no extra payment shall be made to contractor on this account. |
| 58 | S&F in replacement Voltage stabilizer for automatic operation, single phase, naturally air cooled, indoor type, wall mounted, digital type, designed for input variation between 140 V to 295 V with output voltage stabilized at 230 V of capacity 2.0 KVA complete all as specified and directed. |
| 59 | All as per item No. 58 here in above but 3.0 KVA capacity. |
| 60 | S&F in replacement Voltage stabilizer for automatic operation, single phase, naturally air cooled, indoor type, wall mounted, digital type, designed for input variation between 170 V to 270 V with output voltage stabilized at 230 V of capacity 4.0 KVA complete all as specified and directed. |
| 61 | All as per item No. 60 here in above but 5.0 KVA capacity. |
| 62 | Supply & fixing in replacement industrial type metal clad socket only of 20 Amps complete all as specified and as directed. |
| 63 | Supply & fixing in replacement metal clad top 20 Amp complete all as specified and as directed. |
| 64 | S&F in replacement of indoor unit complete set, suitablefor 1.5 TR split AC, consisting of blower motor, blower, wiring kit complete with display, electronic card with remote assembly, evaporative /cooling coil, remoting system, and plastic housing with bracket frame suitable for R-32/ R-410 gases complete all as specified and as directed. Make : HItachi/ daikin/ carrier |
| 65 | S&F in replacement of indoor unit complete set, suitablefor 2.0 TR split AC, consisting of blower motor, blower, wiring kit complete with display, electronic card with remote assembly, evaporative /cooling coil, remoting system, and plastic housing with bracket frame suitable for R-32/ R-410 gases complete all as specified and as directed. Make : HItachi/ daikin/ carrier |
| 66 | S&F in replacement of outdoor unit complete set, suitablefor 1.5 TR split AC , including condenser coil with fins, outdoor fan motor with fan blade, chassis/ cabinet, capacitor, wiring kit, capalliary, filter, base plate complete set including compressor suitable for R-32/ R-410 gases complete all as specified & as directed.Make : HItachi/ daikin/ carrier |
| 67 | S&F in replacement of outdoor unit complete set, suitablefor 2.0 TR split AC , including condenser coil with fins, outdoor fan motor with fan blade, chassis/ cabinet, capacitor, wiring kit, capalliary, filter, base plate complete set including compressor suitable for R-32/ R-410 gases complete all as specified & as directed.Make : HItachi/ daikin/ carrier |
| 68 | S&F in replacement of window AC suitable for 1.5 TR Capacity of existing make & model, including condenser and evaporative coil, dual shaft motor with blower and blade, chassis, base plate complete set except compressor complete all as specified & as directed. |
| 69 | S&F in replacement of window AC suitable for 2.0 TR Capacity of existing make and model, including condenser and evaporative coil, dual shaft motor with blower and blade, chassis, base plate complete set except compressor complete all as specified & as directed. |
| 70 | S&F in replacement of Pin/service/ charging valve of size 3/8\", 5/8\"\" for window AC and Split AC of existing model complete all as specified and as directed. |
| 71 | M&L in repair sub main wiring with 2 runs of 1.5 Sqmm single core, PVC insulated & unsheathed FRLS cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 25 mm dia, surface, PVC, rigid conduit, medium grade, as per IS, inclusive of boxes (junction/terminal), all tees, bends, elbows, reducers bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook including all fixtures /fittings, fixed on wall/ceiling with saddles PVC and one run of 1.5 Sqmm size (with same specification as for main wire) complete all as specified and directed.(Note: Two run of 1.5 Sqmm cable and one run of 1.5 Sqmm earth conductor along with 25 mm PVC conduit with accessories shall be measured as one length) |
| 72 | All as per item No. 71 here in above but 2.5 sqmm size. |
| 73 | All as per item No. 71 here in above but 4.0 sqmm size. |
| 74 | S&F in replacement distribution board (DB), double door type, made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, MCB DB, SPN, 4 way, with 200 Amps rated copper bus bar, neutral bar, earth bar, IP 43 protection, 240 Volts, flush to wall complete all as specified and as directed |
| 75 | All as per item No. 74 here in above but SPN 8 way. |
| 76 | S & F in replacement of MCB, SPN, 240 Volts, 32 to 40 Amps, C curve type complete all as specified and as directed. |
| 77 | S & F in replacement of MCB, SP, 240 Volts, 6 to 40 Amps complete all as specified and as directed. |
| 78 | S&F in replacement of sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps, 240 Volts complete all as specified and as directed. |
| 79 | S & F in replacement distribution board (DB), double door (CRCA sheet) dust and vermin proof TPN 4 way with 100 Amps rated copper busbar, neutral bar, earth bar, IP 43 protection, triple pole and neutral 415 Volts, flush to wall complete all as specified and directed. |
| 80 | S & F in replacement MCB TPN, C curve, 415 Volts, 63 Amps complete all as specified and directed. |
| 81 | S & F in replacement MCB SP, C curve, 240 Volts, 63 Amps, 10KA complete all as specified and directed. |
| 82 | Supply and Fix in replacement of GI water pipe 15 mm bore, medium grade with all fittings (such as bends, elbows, tees, short plugs and union etc.)fixed on wall or floor complete all as specified and as directed. |
| 83 | All as per item No. 82 here in above but 20 mm size. |
| 84 | Taking down desert cooler of any type (Steel body/Plastic body) and any capacity from any height / floor andrefixing the same in same location after repair work/ overhauling all as required at site.Note :- 1. Replacement of defectivespares as \"Supply and Fix\" of Deseart Coolerwill not included in unit rate & measured & paidseparately under relevant items and Labour charges for taking down desert cooler and refixing shall deemed to be included in unit rate quoted. |
| 85 | M&L for preparation of old painted surface of desert cooler of any capacity and any make on inner surface & outer surface. Repainting the complete desert coolers i.e side panel, bracket, body & desert cooler stand with two coats of synthetic enameled paint (1st grade quality) including two coats of black water proof paint on reserve water tank including servicing & greasing of fan motor/pump complete all as specified and directed. |
| 86 | Supply and Fix in replacement of grass pad, approximate weight 700 - 900 gms of size 20\"\" or 24” sweep desert cooler complete all as specified and directed. |
| 87 | Supply and Fix in replacement of submersible pump motor 230 Volts , single phase, AC suitable for Plastic body/Steel body Desert cooler complete all as specified & as directed. (MakeKhaitan/ USHA/ Crompton Greaves/Bajaj.) |
| 88 | Supply and Fix in replacement of desert cooler copper wounded kitfan motor of capacity 1400 RPM, 90 Watt complete all as specified & as directed. (MakeKhaitan/ USHA/ Crompton Greaves/Bajaj.) |
| 89 | Supply and Fix in replacement of GI wire mesh for desert cooler pad complete all as specified and directed. |
| 90 | Supply and Fix in replacement of front grill for desert cooler of approved make complete, with 5 Amp switch, three speed regulator including indicator lamp complete all as specified and directed. |
| 91 | Supply and Fix in replacement of PVC pipe for connecting pump and water distributor of size 15 mm complete all as specified & as directed. |
| 92 | Supply and Fix in replacement PVC elbow for desert cooler of suitable size complete all as specified & as directed. |
| 93 | Supply and Fix in replacement of PVC 4 Way distribution cross for desert cooler complete all as specified & as directed. |
| 94 | Supply and Fix in replacement of desert coolers metallic fan blade of 18\"\"/ 20\"\" inch sweep complete all as specified & as directed.. |
| 95 | Supply and Fix in replacement of fan motor kit bracket sets includingpaintingcomplete all as specified and directed. |
| 96 | Supply and Fix in replacement of switch piano flush type single pole one way 5Amp / 6 Amp 230 V for desert cooler all as directed. |
| 97 | Supply and Fix in replacement of 3 pin plug top 5 Amp, 230V for desert cooler complete all as specified and directed. |
| 98 | Supply and Fix in replacement of 3 pin plug top 15 Amp, 230V for desert cooler complete all as specified and directed. |
| 99 | Supply and Fix in replacement 1.5 sqmm 3pin / 3 core copper wire lead with cord plug , PVC insulated & unsheathed 1100 Volts grade with multi stranded, copper conductor minimum 3 meter in length complete all as specified and as directed. |
| 100 | Supply and Fix in replacement desert cooler fan regulator of 1000 watt capacity complete in all aspect all as specified and directed. |
| 101 | Supply and Fix in repairs desert cooler body of size 25 inch x 25 inch x 36 inch (height) with side panels (03 Nos) fabricated out of 18 SWG PGI Sheet alongwith PVC front grill, speed regulating switch, 5 Amp piano switch and tank of depth 11 inch. Painting the complete desert cooler i.e, side panel, bracket body with two coat of synthetic enamel paint (Ist grade quality) over a coat of red oxide zinc chrome primer and two coat of black water proof paint on reserve tank complete all as specified and directed. |
| 102 | Supply and Fix in replacement of exhaust fan motor copper woundedhaving 1400 RPM, 150 watts with 500mm sweep suitable for operation on 230 volts, 50Hz, AC supply, including fan brackets/ clamps of suitable size and all fixing accessories complete all as specified & as directed. (MakeKhaitan/ USHA/ Crompton Greaves/Bajaj.) |
| 103 | Supply and Fix in replacement of heavy duty exhaust fan motor blade of suitable size or as per site requirement complete all as specified and directed. |
| 104 | Supply and fixed in replacement prefabricated MS desert cooler stand (size required as per site) for desert cooler made out of MS angle iron frame of size 25 x 25 x 4 mm in cubical shape and MS flat iron strip of size 20 mm width and 3 mm thickness to hold the legs of cooler stand at the bottom including welding and duly painted with two coat of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed. |
| 105 | M&L for shifting of water cooler/ refrigerator/ deep freezer of any type any capacity from one location to another location with fixing electic/ water connection and necessary transporation arranged by contractor for shiftingcomplete all as specified and directed. |
| 106 | M &L for disconnecting from mains and taking down for servicing of Water Cooler ofCapacity 40/80, 60/120,150/150, 180/180 Ltrs/Hr or any capacity including cleaning of water tank ,cooling coil, air filters , condenser, compressors, fan motor etc with vacuum cleaner or cleaning solution includingcheckingthe serviceability of electrical/electronic circuits relays, wiring kit, thermostat switches knobs,fan andblower, etc. andkeepingthe Water coolerunit in satisfactory working condition after necessary servicing/ repair/ replacement of defective spares as required and installation in same location complete all as specified and as directed by Engineer-in-Charge.Note :- 1. Replacement of defectivespares for making the water cooler units in satisfactory working condition will be measured & paidseparately under relevant items as \"Supply and Fix\" and Transportation & labour charges for taking down old spares and fixing of new sparesshall deemed to be included in unit rate quoted above. |
| 107 | Supply and Fix in replacement Starting relay of water cooler. |
| 108 | Supply and Fix in replacement Starting Capacitor 25 MFD. |
| 109 | Supply and Fix in replacement Running Capacitor 10 MFD. |
| 110 | Supply and Fix in replacement PVC flexible drain Hose pipe 40 mm size, and suitable length. |
| 111 | Supply and Fix in replacement Condenser fan blade aluminium body. |
| 112 | Supply and Fix in replacement over load protector device for water cooler any capacity. |
| 113 | Supply and Fix in replacement thermostat switch for water cooler any capacity. |
| 114 | Supply and Fix in replacement self closing chromium plated push taps for water cooler Capacity any capacity. |
| 115 | M&L for disconnecting the electric & water connection of water cooler and taking out the unsv compressor of any make from water cooler capacity 40/80, 60/120, 150/150, 180/180 Ltrs/Hr, and supply installation & testing of new sealed unit compressorof similar capacity in same locationalongwith test Certificate from manufacturer and cleaning of condenser by machine doing vaccum on the fully system and supply and charging of oil and gas and other necessary lubricants including reconnecting the electric and water connections, transportaion& testing complete all as directed by Engr-in-charge. |
| 116 | M&L for disconnecting the electric & water connection of water cooler and taking out old unsv condenser fan motor from water cooler capacity 40/80, 60/120, 150/150, 180/180 Lt/Hr, and supply and fixing of new motor single phase AC 220 V of same capacity including reconnecting the electric connections and testing complete all as directed by Engr-in-Charge. |
| 117 | M&L for disconnecting the electric & water connection of water cooler and taking out old unsv condenser coil from water cooler capacity 40/80, 60/120, 150/150, 180/180 Lt/Hr, and new condenser coil as per existing size & patterns complete all as specified & as directed. |
| 118 | M&L for disconnecting the electric & water connection of water cooler and taking out old unsv evaporative coil from water cooler capacity 40/80, 60/120, 150/150, 180/180 Lt/Hr, and new evaporative coil as per existing size & patterns complete all as specified & as directed. |
| 119 | M&L for cleaning & removing the existing paint of water Cooler capacity 40/80, 60/120, 150/150, 180/180 Ltrs/Hr, by rubbing & preparing the surface smooth & applying one coat of zinc chrome primer and two coats of synthetic enamel paint (1st grade quality) by spray gun machine of colourrequired as per site complete all as specified and directed. |
| 120 | Supply and Fix in replacement of GI water tubing 25 mm bore, medium grade with all fittings (such as bends, elbows, tees, short plugs and union etc.)fixed on wall or floor complete all as specified and as directed. |
| 121 | Supply and Fix in replacement of stop valve 15mm bore dia, fancy type chromium plated with long shank and cup (concealed type), screwed both ends for iron pipe or for unionscomplete all as specified and as directed. |
| 122 | Supply and Fix in replacement of 15mm dia PTMTball valve high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 142 gms)complete all as specified and directed. |
| 123 | M&L for taking down unserviceable PVC connection pipe and Supply and Fix of PVC connections pipe of 15 mm dia bore with PTMT nuts of length 900 mm complete all as specified & as directed. |
| 124 | Material and labour for detecting of leakages of gases in Water cooler, Refrigerator, deep freezer of any type any capacity at any location and rectifying the defect to stop the leakage by gas welding or by any other means including cutting and brazing of copper tubes testing and commissioning complete in satisfactory working condition. Note: rate of gas excluded and shall pe paid separately. |
| 125 | M&L for taking out old unsv evaporator /freezer from the refrigerator/ deepfreezer and Supply and Fix of new evaporator/freezer made out of aluminium press type of 165/180/195/310/330/450 and 500 Ltrs or any capacitywith freezer frame and door including connection, complete all as specified & as directed. |
| 126 | M&L for disconnecting from electric connection and taking down the unsv compressor unit from refrigerator/ deepfreezer of any make and type and Supply and Fix of new compressor unit suitable for 165/180/195/310/330/450 and 500 Ltrs or any capacity alongwith test certificate from manufacturer including filling of suitable refrigerant /gas, replacement of filter and put in working condition all as directed by Engineer-in-Charge.Note : The rates quoted by the contractor shall deemed to include the transportation cost from site of installation to contractor\"s repair workshop and back. |
| 127 | M&L for servicing of refrigerator/ Deep freezer of 165/180/195/310/330/450 and 500 Ltrs or any capacity any type by disconnecting electric connection and taking down, cleaning of cooling coil, condenser coil, compressors, including checkingthe serviceability of electrical/electronic circuits relays, wiring kit, thermostat switches knobs, etc. and keeping the refrigerator/deepfreezer unit in satisfactory working condition after necessary repair/ replacement of defective spares as required complete all as specified and as directed by Engineer-in-Charge.Note : Replacement of defectivespares for making the refrigerator/ Deep Freezer units in satisfactory working condition will be measured & paidseparately under relevant items as \"Supply and Fix\" and Labour charges for taking out old spares and fixingof new sparesshall deemed to be included in unit rate quoted. |
| 128 | Supply and Fix in replacement of Thermostat switchwith Knob. |
| 129 | Supply and Fix in replacement of Starting relay Open type with O.L.any type for any cap.. |
| 130 | Supply and Fix in replacement of Copper filter single capilary pencil any type for any cap. |
| 131 | S&F in replacement polycarbonate Modular AC box with Single pole MCB 25 Amps,with heavy duty ISI Marked 3 Pin Plug Top complete all as specified and directed. |
| 132 | M&L in repair sub main wiring with 2 runs of 6.0 Sqmm single core, PVC insulated & unsheathed FRLS cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 32 mm dia, surface, PVC, rigid conduit, medium grade, as per IS, inclusive of boxes (junction/terminal), all tees, bends, elbows, reducers bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook including all fixtures /fittings, fixed on wall/ceiling with saddles PVC and one run of 6.0 Sqmm size (with same specification as for main wire) complete all as specified and directed.(Note: Two run of 6.0 Sqmm cable and one run of 6.0 Sqmm earth conductor along with 32 mm PVC conduit with accessories shall be measured as one length) |
| 133 | M&L in repair sub main wiring with 4 runs of 10.0 Sqmm single core, PVC insulated & unsheathed FR cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 40 mm dia, surface, PVC, rigid conduit, medium grade, as per IS, inclusive of boxes (junction/terminal), all tees, bends, elbows, reducers bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook including all fixtures /fittings, fixed on wall/ceiling with saddles PVC and 2 run of 10.0 Sqmm size (with same specification as for main wire) complete all as specified and directed.(Note: Four run of 10.0 Sqmm cable and two run of 10.0 Sqmm earth conductor along with 40 mm PVC conduit with accessories shall be measured as one length) |
