Tender For Road Signage Work At Mianpurwa Intersection Under Sitapur District Block. - P/L hot applied thermoplastic compund 2.5 mm thick including reflectionsing glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of suraface applied glass beads as per IRC:35 the finished surface to be level, uniform and free from streak and holes. 2 P/L of hot applied thermoplastic compound 5.00 mm thick i/c. reflectorising glass beads @ 500 gms per sqm area, thickness of 5.00 mm exclusive of surface applied glass beads as per IRC: 35 . The finished surface to be level , uniform and free from streaks and holes. ( Repeated Bar) 3 Providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 04 to 0.5 mm both side aluminium skin aluminum composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC-07 2012 retro reflective sheeting with back frame MS angle of 35x35x5 mm Legends, letters, numerals and borders etc should be as per MORTH specification No-801.3.7 The sheeting shall have a pressure-sensitive adhesive of the aggressive tack type requiring no heat, solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer. The ACM (Aluminium Composite Materials) shall be fixed on the Back frame MS) Angle with riveting. Micro prismatic type IV Retro reflective sheeting confirming to ASTM D4958-09 shall be Pressure fixed. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Altematively, a certificate conforming to ASTM Specification (D) 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally In such a situation, the Employer/Client. if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67 2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include all materials, labour, T&P, transportation. installation and incidentals all complete as per direction of the Engineer-in-ChargeInformatry Boards (1200 mm X 900 mm Rectanguler Board) 4 providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67- 2012 made of high intensity grade sheeting type IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shal be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International Government Laboratory/ Institute by the manufacture of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer / Client, if so desires. could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67 2012 Legends, letters. numerals and borders etc should be as per MORTH specification No-801.37. Proof of the same in form of government report shall be uploaded while quoting tenderCautionary Boards (900 mm Equilateral Triangle Board) 5 Intersection informationBoard 6 Speed Limit Board 7 Stop Boards (900 mm Octagonal Board) 8 Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/- 5) degress to base The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM 1: 809 as recommended in BS: 873 part 4: 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.
