Tender For Construction Of Service Road Both Side On 02 Lane Rob At Xing 115Spl Between Bhatni And Bhatpar Rani In District Deoria, Deoria-Uttar Pradesh
TDR : 47594016
Tender Notice
BOQ
Expired
Deoria
Uttar Pradesh
Tender For Construction Of Service Road Both Side On 02 Lane Rob At Xing 115Spl Between Bhatni And Bhatpar Rani In District Deoria
Name of Work: Construction of Service Road Both side on 02 Lane ROB at Xing 115Spl between Bhatni and Bhatpar Rani in District Deori
Sl. No.
Item Description
1
Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto 1000 metres.(Reference to SR No- 3.1 MORT&H Specification 301)
2
Case-I Compacting Original Ground supporting subgrade Loosening of the ground upto a level of 500 mm below the subgrade level, watered,graded and compacted in layers to meet requirement of Table 300-2 for subgrade construction.(Reference to SR No- 3.20 MORT&H Specification 305.3.4)
3
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401(Reference to SR No- 4.1 MORT&H Specification 401)
4
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(Reference to SR No- 4.14 MORT&H Specification 406)
5
Providing and applying prime coat with bitumen emulsion using on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.06 kg/sqm using mechanical mean(Reference to SR No- 5.1 MORT&H Specification 502)(i)
6
Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder( Bitumen@ 3.3per centof mix), transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction(Reference to SR No- 5.3 MORT&H Specification 504)
7
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 Kg. Per sqm ibtage oreoared bituminous/granular surface cleaned with mechanical broom.(Reference to SR No- 5.2 MORT&H Specification 503)(i)
8
Providing and laying bituminous concrete withhigher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.2per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects(Reference to SR No- 5.5 MORT&H Specification 507)(i)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
