|
| 1 | Repairing & Painting work of Watch Tower situated at 70 Acre & 11 Acre |
| 2 | Dismanting existing plaster including disposal of refuse as directed by Engineer-in-charge with in a distance of 60 mt.(200 feet). DSR 2023/15.56 |
| 3 | 12 mm cement plaster of mix: 1:4 (1 Cement : 4 Coarse sand). DSR 2023/13.4.1 |
| 4 | Wiring Point for light 1.5 sq. mm multi standard single core PVC cable indulge conductive consealed in wall. S.I. No. 131c |
| 5 | Mirror polishing on marble work/Granite work/Stone Work where ever required to give high gloss finish complete DSR 2023/8.6 |
| 6 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore. DSR 2023/18.51.1 |
| 7 | Provinding and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore. DSR 2023/18.53.1 |
| 8 | Providng and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe of 32 mm dia. DSR 2023/17.28.2.1 |
| 9 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. DSR 2023/17.1.1 |
| 10 | Providing and fixing wash basin with C.I. brackets, 15 mm dia C.P. brass single hole basin mixer of approved quality and make , including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash Basin size 550x400 mm with a15 mm C.P. brass single hole basin mixer. DSR 2023/17.7A |
| 11 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 2023/18.48 |
| 12 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : 30 mm thick Red Sand Stone- exposed face fine dressed with rough backing DSR 2023/8.14.1.5 |
| 13 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.DSR 2023/13.91 |
| 14 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 2023/13.80 |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (DSR 2023/13.62.1) |
| 16 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x2635 mm sizes respectively with automatic flushing cistern with standard flush pipe and cpbrass spreaders with brass unions and GI clamps complete including painting of fittings and brackets. cutting and making good the walls and floors wherever required: One urinal basin with 5 litre white PVC automatic flushing cistern. DSR 2023/17.4.1 |
| 17 | Wiring Point 1.5 square mm including single core PVC Light & fan point. 133c |
| 18 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in grating, frames, guard bar, ladder, railings, brackets, gatesd similar works. DSR 2023/10.25.2 |
| 19 | Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces. DSR 2023/10.5.1 |
| 20 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.DSR 2023/10.3 |
| 21 | Providing and fixing to existing door frames30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. (DSR 2023/9.122.2) |
| 22 | S/F MCB Box size 600x480mmx 20mm sl. No. 1114B |
| 23 | S/F On single wall light bracket on matching MDFEG board base allsl. No. 412 |
| 24 | S/F of power play 15mm 250 watt fresh switch 3 pin m amperesl. No. 1139 |
| 25 | S/F of 40 ampere DP Insolator sl. No. 1005A Cat (A) |
| 26 | Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end): 20mm nominal bore DSR 2023/18.17A |
| 27 | P/F CP Brass Zali 100mm |
| 28 | Providing and fixing Ball valve (Brass of approved quality, high or low pressure, with plastic floats complete 25 mm nominal bore DSR 2023/18.18.3 |
| 29 | Providing and fixing Unplasticised PVC connection pipe with PT MT nuts, collar and bush of approved quality and colour. 15mm nominal bore with 45 cm length. DSR 2023/18.74.2 |
| 30 | Arrangement of sewer man for clean of chocked sewer lines. DSR 0129 |
