Housing Urban and Rular Development Government Departments Closing in 0 days TDR #47584458

Tender For Renewal Of Padeena Katra Road Km 20 To Bhagwatipur Road - Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With S

Issued by Government Departments · , Uttar Pradesh
Tender Value
5 Lakhs
Estimated cost
Bid Submission
24 Feb 2025
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
856
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
→ Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Renewal Of Padeena Katra Road Km 20 To Bhagwatipur Road - Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.. Excluding GST 2 Providing and applying tack coat with Bitumen (VG-10)using Bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. excluding GST 3 Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.Excluding GST 4 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall usingType C as per Technical Specification Clause 510.Excluding GST 5 Earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge. Excluding GST 6 SCHEDULE - “C”The materials May be issued to the contractor as following:-S. No. Name of MaterialUnitRate of Bitumen Per MT at whichPlace of issue deduction shall be made (In Rs) (Excluding GST)1Bitumen VG-10 MT47000.00 (Or Current rate which ever is higher) C.D., P.W.D. Store at MainpuriConditions:-1- There shall have no claim of contractor, if the material is not issued by the department due to non-availability in store or any other reason.3- The unconsumed material issued in excess of bonafide consumption norms, shall have to be returned back to the store as mentioned above, failing which a recovery at the punitive rate, i.e., double the issue rate shall be made from the contractor’s bill.4- Contractor have to return empty bitumen drums/emulsion drums immediately, failing which a recovery at the punitive rate i.e., Rs. 3000 per drum shall be recovered from the contractor’s bill.5- The departmental road roller if spare, shall be made available to the contractor at site @ Rs. 2500 per day including POL charges, wages of driver and cleaner. If roller is kept idle due to non-availability of material or labour, recovery @ Rs. 2500 per day shall be made from contractor’s bill for idle period.

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 07-Feb-2025 date Date 07-Feb-2025
2 16-Feb-2025 date2 Date 24-Feb-2025

BOQ

Name of Work:iMhuk dVjk ekxZ fd-eh- 2 ls Hkxorhiqj
Sl. No. Item Description
1Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.. Excluding GST
2Providing and applying tack coat with Bitumen (VG-10)using Bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. excluding GST
3Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.Excluding GST
4Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall usingType C as per Technical Specification Clause 510.Excluding GST
5Earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge. Excluding GST
6SCHEDULE - “C”The materials May be issued to the contractor as following:-S. No. Name of MaterialUnitRate of Bitumen Per MT at whichPlace of issue deduction shall be made (In Rs) (Excluding GST)1Bitumen VG-10 MT47000.00 (Or Current rate which ever is higher) C.D., P.W.D. Store at MainpuriConditions:-1- There shall have no claim of contractor, if the material is not issued by the department due to non-availability in store or any other reason.3- The unconsumed material issued in excess of bonafide consumption norms, shall have to be returned back to the store as mentioned above, failing which a recovery at the punitive rate, i.e., double the issue rate shall be made from the contractor’s bill.4- Contractor have to return empty bitumen drums/emulsion drums immediately, failing which a recovery at the punitive rate i.e., Rs. 3000 per drum shall be recovered from the contractor’s bill.5- The departmental road roller if spare, shall be made available to the contractor at site @ Rs. 2500 per day including POL charges, wages of driver and cleaner. If roller is kept idle due to non-availability of material or labour, recovery @ Rs. 2500 per day shall be made from contractor’s bill for idle period.

AI Tender Summary

OUR REF NO 47584458
AUTHORITY Government Departments
TENDER VALUE 5 Lakhs
LAST DATE 24-02-2025
Authority
Authority Name Public Works Department
Work Description Tender For Renewal Of Padeena Katra Road Km 20 To Bhagwatipur Road - Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.. Excluding GST 2 Providing and applying tack coat with Bitumen (VG-10)using Bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. excluding GST 3 Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.Excluding GST 4 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall usingType C as per Technical Specification Clause 510.Excluding GST 5 Earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge. Excluding GST 6 SCHEDULE - “C”The materials May be issued to the contractor as following:-S. No. Name of MaterialUnitRate of Bitumen Per MT at whichPlace of issue deduction shall be made (In Rs) (Excluding GST)1Bitumen VG-10 MT47000.00 (Or Current rate which ever is higher) C.D., P.W.D. Store at MainpuriConditions:-1- There shall have no claim of contractor, if the material is not issued by the department due to non-availability in store or any other reason.3- The unconsumed material issued in excess of bonafide consumption norms, shall have to be returned back to the store as mentioned above, failing which a recovery at the punitive rate, i.e., double the issue rate shall be made from the contractor’s bill.4- Contractor have to return empty bitumen drums/emulsion drums immediately, failing which a recovery at the punitive rate i.e., Rs. 3000 per drum shall be recovered from the contractor’s bill.5- The departmental road roller if spare, shall be made available to the contractor at site @ Rs. 2500 per day including POL charges, wages of driver and cleaner. If roller is kept idle due to non-availability of material or labour, recovery @ Rs. 2500 per day shall be made from contractor’s bill for idle period.
Basic Detail
Tender No 13/5A date 03.01.2025
Bidding Type Tender
Location
City
State Uttar Pradesh
Key Dates
Publish Date 16 Feb 2025
Submission Date 24 Feb 2025
Open Date 24 Feb 2025
Finance
Tender Value 5 Lakhs
Tender Fee 856
EMD 50000
Exemption Available
Document List
25be9148-4f7f-4140-b977-b6cc395e4ef8.html
BOQ_1787310.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 16, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 07, 2025
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Feb 24, 2025
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Completed
Feb 24, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 24, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

25be9148-4f7f-4140-b977-b6cc395e4ef8.html

xls

BOQ_1787310.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders