Tender For Extension Renovation And Modernization Of Sonapur Damarapathar Elis Under Tsp For The Year 2024_25 Dispur Division Irrigation Kamrup Circle
Tender Value
79.21 Lakhs
Estimated cost
Bid Submission
25 Feb 2025
0 days left
EMD
1.58 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sonapur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Extension Renovation And Modernization Of Sonapur Damarapathar Elis Under Tsp For The Year 2024_25 Dispur Division Irrigation Kamrup Circle
BOQ
| Sl. No. | Item Description |
| 1 | Fabrication of Barge along with two nos of Pump Set & Other Mechanical Works |
| 2 | Supply & Fabrication of steel floating brage including anchoring of Size 4.57 mm x 3.81 mm x 1.37 mm for LIS. Heavy duty Steel Wire Rope , steel core, tested Quality, galvanized ,6/19 construction as per IS:2266-2002 , 19mm dia U-Bolt For, 19 mm dia wire ropeC.I. Ballard Fitting fixing anchoring system including carriage and handling @ 5% on 2,3 & 4i.e.,on Rs. 52,049.79 |
| 3 | Fabrication and Installation of M.S. Foot Bridge |
| 4 | Centrifugal pump set with 60/70 LPS minimum discharge at 10.35 Mtrs Head, working efficienctly at head range (7.62-13.71) Mtrs coupled with 20 HP induction motor. Pump, Motor, Starter should be of reputed brand and as per IS specification. Motor: Cnformation to IS : 325 - 19781. Make :MARATHON/LUBI/Kirloskar/ Crompton/Havells.2.Type/Model: Squirrel cage TEFC,3. hp: 20 HP4. RPM: 1450 5.Supply voltage/phase/cycle : 415 V ±10% 3 Ph/ 50 Hz PUMP:- Conforming IS: 6595 Part-I 1.Make : Lubi/Kirlosker 2. Type: Horizontal Axially Split casing3. Model: LHC 125-250/ UP-125/30 A4. Size(Suction X Delivery): 150 mm x 125 mm. 5. Head Range : 7.62-13.71 M. 6. Pump Input : 10.81 KM. 7. Efficiency at duty point: 78%STARTER SUITABLE TO RUN ABOVE PUMP SET: 1.Make: BCH/Havells/Equivalent . 2. Model: NASALLEM.3. Type: FASD. 4. Relay Range: 13-21 AAlso includes best quality MS frame and coupling of required size and shape. |
| 5 | Fabricated heavy duty G.I. Bend confirming to IS– 1239 (Part-I) 2004, with G.I. Flange at both end (G.I. Flange having8 nos. hole as per B.S.S.-10 Part-I, table-D, of size:- 150 mm dia x 90° |
| 6 | Fabricated heavy duty G.I. Pipe confirming to IS 1239 (Part-I) 2004, with G.I. Flange at both end (G.I. Flange having 8 nos. hole asper B.S.S.-10 Part-I, table-D, of size:- 150 mm dia x 0.30 Mtr. Long |
| 7 | Fabricated heavy duty G.I. Pipe confirming to IS 1239 (Part-I) 2004, with G.I. Flange at both end (G.I. Flange having 8 nos. hole asper B.S.S.-10 Part-I, table-D, of size:- 150 mm dia x 1.2 Mtr. Long |
| 8 | Heavy Duty CI Foot Valve, Flange type, the holes of the flange should be drilled as per BSS No. 10, Part-1, Table-D. The materials of construction and all components of the Foot Valve should be strictly conform to IS : 10805-1986 and having marked with manufacture name and trade mark of 150 mm dia. |
| 9 | CIDF Sluice Valve of 125 mm dia, Make : Kirloskar/ Upadyaya/Zolato/Venus & Eqv. |
| 10 | CIDF Reflex Valve of 125 mm dia, Make : Kirloskar/ Upadyaya/Zolato/Venus & Eqv. |
| 11 | Fabricated M.S.D.F. Pipe, 5mm thich with 19mm dia 12 nos. hole in the flange of thickness 10mm, for different size :- 125mm dia x 0.30 Mtr. long |
| 12 | Fabricated M.S.D.F. Pipe, 5mm thich with 19mm dia 12 nos. hole in the flange of thickness 10mm, for different size :- 125mm dia x 0.60 Mtr. long |
| 13 | Fabricated M.S.D.F. Pipe, 5mm thich with 19mm dia 12 nos. hole in the flange of thickness 10mm, for different size :- 125mm dia x 1.20 Mtr. long |
| 14 | Fabricated heavy duty G.I. Bend confirming to IS– 1239 (Part-I) 2004, with G.I. Flange at both end (G.I. Flange having8 nos. hole as per B.S.S.-10 Part-I, table-D, of size:- 125mm dia x 90º |
| 15 | Flexible Rubber Hose Pipe with MS built in type flange 125mm nominal dia x 7.5 Mtr in Length |
| 16 | Fabricated M.S.D.F pipe, 5 mm thick with 19 mm dia 12 nos. hole in the flange of thickness 10 mm for different size:-125 mm dia x3.00 Mr long. |
| 17 | Copper Conductor Armoured cable of 16 Sq mm x 3 core |
| 18 | Installation of Centrifugal Pump set (Horizontal Split casing type, size: 150 mm(suction) x 125 mm dia. (delivery) of 60 LPS minimum discharge at 13.00 Mt head coupled with 3 ph, 415 V, 50 Hz, 1450 RPM squirrel cage induction motor of 20 HP complete set.The job includes necessary transportation of pump set to the site and installation on barge /pontoon in proper position with accurate aligment by means of foundation nuts and bolts etc including testing & commissioning at site at full load condition complete with all works. complete with all works. |
| 19 | Fitting, fixing and laying of G.I. Pipes with Accessories: Laying, fitting, fixing and connection of suction pipe line for each pump set with 150mm dia. G.I. pipes of different length, fabricated G.I. pipes with different length, fabricated bends, tapper including foot valve for suction side.Reflex valve,sluice valve for delivery side of each pump set with 125mm dia. G.I. pipes with different length, bends, fabricated G.I. pipes with different length as per drawing. The joints should be with the best quality pipe joining sets of required size comprises of 60mm thick black moulded rubber gasket, necessary nuts, bolts and washer. Every joint should be leak proof and should be completed in all respect from foot valve to the pump flange for suction side and from delivery flange is the water flow through atproper F.S.Lfor the delivery side. The pipes lines with accessories must be proper painting. |
| 20 | Providing, fitting , fixing and erection of pipe supports for each pipeline at on interval of 3.00 Mtr. (approx) made of M.S. channel (ISMC 75) 1.50 Mtr. height with angle bracing erected on CC block of size 0.45mX0.30mX0.60m below ground. |
| 21 | Starter Stand: Supply & Installation of MS Starter Stand made of MS Angle of size 50mmx50mmx5mm including of providence C.C Block Foundation for installation of starter stand along with the required cement concrete works etc. The work includes painting of the starter stand with 1(one) coat of red oxide metal primer to be followed by 2(Two) coats of anticorrosive smoke grey paint to be applied after air drying of each previous coat. |
| 22 | Laying and connection of cables such as Feeder cable, priming motor cable, lighting cable etc. 16sqmm x 3 Core |
| 23 | Crompton Make DMB 10ACSL 1 H.P(0.75 KW) Electric Driven Centrifugal Mono-Block Pump Set (Suction-25 mm dia. & Suction-25 mm dia.) |
| 24 | D.O.L. Starter, 1.5 H.P/1.1 kw Over load Relay Range 8.9-13.5 |
| 25 | Single pole M.C.B. 16A ICS |
| 26 | Installation, fitting, fixing of 1.0 HP mono block pump set (excluding cost of pump set), pipes and accessories for priming system at each point of a ELIS. The job consists of supply and fitting of items like Flexible PVC pipe, GI pipe, GI Tee, GI Elbow, GI Nipple, GI Socket Bronze valve, Foot valve, PVC insulated copper conductor etc and labour charges. |
| 27 | Electrical Works |
| 28 | Outdoor Power Distribution SystemTPN Main Switch (SDFU - Switch Disconnector Fuse Unit) WallMounting TypeSupplying including fitting, fixing & connection of TPN Main Switch (SDF) with HRC Fuses, 415 V AC, in Sheet-Steel Housing of following current ratings to be fitted in existing Angle Iron Frame/Wall with Clamps, Nuts & Bolts and all other necessary materials as directed including drilling of holes as required160 A |
| 29 | LAYING OF LT/HT POWER CABLESSupply and Laying in Air/ Open TrenchSupply and Laying of Single Core PVC/ XLPE Insulated Armoured LT Power Cable 1.1 kV Grade with Al Conductor in existing open trench/ in air including fixing with necessary clamps etc. in wall/ pole/ other support including End Termination with BrassCompression Gland and Cable Lug as required and as directedSize of Cable : Size of Cable : 50 Sq mm × 1 core(4 line) |
| 30 | 70 mm2 × 3.5 Core: Supply and Laying of PVC/ XLPE Insulated Armoured LT Power Cable 1.1 kV Grade with Al Conductor of size 50 mm2 × 3.5 Core in Single line ,Conforming IS 7098(Part I) 1988, direct in ground including digging of trench of 0.3 Mtr wide × 0.75 Metre deep including Sand Cushioning (7.5 cm + 7.5 cm) and refilling alongwith fitting, fixing of Brass Compression Gland and Aluminium Cable Lug etc. asdirected |
| 31 | MLTPB InstallationSupplying, installation, testing & commissioning of indoor type floor mounted, cubicle type compartmental, dust and vermin proof (as per IP-54) main LT Control Panel Board of following capacity combination and of given size, made out of 16 SWG CR Sheet and 40mmх40mmх6mm angle having four nos. of legs 400 mm long at the bottom, with folded and welded construction having dismantling doors at the back, surface chemically treated and Siemen\"s grey powder coated, containing Al. strip busbar having minimum current density of 1.2 Amp/mm2 R-Y-B-N colour coded with heatshrinkable insulating sleeves containing all incoming and outgoing electrical accessories as specified, neatly installed and internally wired with best quality multi-strand, PVC insulated Single core unsheathed, HRFR copper wire (switch gears above 100Amp rating to be connected to busbar through Aluminium strip of suitable size) having cable incoming & outgoing provision at the bottom through gland plates complete including necessary excavation of trench and C C Work as directedMain LT Panel Board Suitable for operation of 2 х 20 HP PumpsetSize :1200 mm(B)х 1200 mm(H)х 400 mm(D)Electrical accessories :-1 FP, 415 V 125 Amp MCCB with Short Circuit & OverloadProtection, Breaking Capacity 35 / 36 kA as main incomer 1 No2 TP, 63A, 415V , AC Motor Control Switch(SDF) with 63A HRC Fuse 2 Nos.3 Air Break Contactor, TP 32 A, 415 V, AC for Capacitor Duty 2 Nos.4 TP, 415V 32 Amp, MCB for Power Capacitor 2 Nos.5 M.I. Voltmeter, 0-500V, 1% accuracy 96mm х 96mm size 1 No6 Voltmeter Selector Switch, 4 position, 10/15 Amp 1 No7 M.I. Ammeter, CT operated, 1% accuracy 96mm х 96mm size a) 0 - 100 Amps for Incoming Side 1 Nob) 0 - 60 Amps for Outgoing Motor Feeder 2 Nos.8 Ammeter Selector Switch, 4 position, 10/15 Amp 3 Nos.9 Analog Power Factor Meter, 96mm х 96mm size 1% accuracy 1 No10 Current Transformers for metering purpose Accuracy Class Ia) CT, 100/5 for incoming side 6 Nos.b) CT, 60/5 for outgoing side 6 Nos.11 LED type Pilot Indicating Lamp 25 mm 3 Nos.12 DP, 250V, 16A, MCB with breaking capacity 10kA for lighting purpose1 No13 SP, 250V, 1A, MCB with breaking capacity 10kA for meter protection3 Nos.14 Aluminium Busbar, 25 mm × 5 mm 1 Set15 On and Off Push Button Switch 2 Set |
| 32 | PIPE EARTH STATIONSupplying & Erection of Pipe Earth Station including supply of all materials with G I Pipe of following size perforated all over the body with 12 mm dia hole at standard spacing with necessary reducing socket, locking arrangement with hinge cover plate, funnel G I Nuts & Bolts etc. with necessary enclosure on the top including excavation and refilling as required and as directed.Earth Station with 40 mm dia × 2.5 Metre long G.IPipe |
| 33 | G I EARTH WIRE Supply & Erection of G.I. Earth Wire and Earthing of different Substation Items by connecting the existing Earth Pipes with G. I. Lugs as directedwith 6 SWG G I Wire |
| 34 | STARTER CABLE & PF CORRECTIONSupply and Laying of 3(Three) Core PVC/ XLPE Insulated Armoured LT Power Cable 1.1 kV Grade with Al Conductor in existing open trench/ in air including fixing with necessary clamps etc. in wall/ pole/ other support including End Termination with Brass Compression Gland and Cable Lug as required and as directed. Size of Cable : 35 mm2 × 3 Core ( Single Line) |
| 35 | LT CAPACITOR BANK Supplying fitting fixing of LT Power Capacitor 415 Volt AC 3 φ (Single Unit) of following KVAR Rating and making connection with Busbar inthe existing Panel. The Capacitor is to be placed in existing Platform.6 kVAR |
| 36 | IRON ANGLE STAND FOR CAPACITOR BANK Supplying fabrication and erection of Iron Angle Stand for erection of LT PowerCapacitor made of M S Angle of size 30 mm x 30 mm x 5 mm with 4 Nos. legs 400 mmhigh and cross pieces having Bakelite Sheet Horizontal Platform as directedSize of the Frame : (1200 mm × 300 mm) × 400 mm |
| 37 | EXTERNAL ILLUMINATIONSupplying including fitting, fixing & connection of TPN Main Switch (SDF) with HRC Fuses, 415 V AC, in Sheet-Steel Housing of following current ratings to be fitted in existing Angle Iron Frame/Wall with Clamps, Nuts & Bolts and all other necessary materials as directed including drilling of holes as required63 A |
| 38 | Supplying & Erection of Swaged Type Steel Tubular Pole of following lengths and specifications for overhead Electric Lines with necessary Base Plate and Top Cap including digging of Earth Pit to a depth ⅕th of the Pole Length, refilling and necessary CC work (45cm x 45 cm) in 1:3:6 proportion from bottom upto 45 cm above the Ground Level with hard ramming including painting of the pole asdirectedSteel Tubular Pole 410 SP-9, 7.5 m long (IS 2713-Part III 1980) |
| 39 | Supply and Laying of PVC/ XLPE Insulated Armoured LT Power Cable 1.1 kV Grade with Al Conductor in existing open trench/ in air including fixing with necessary clamps etc. in wall/ pole/ other support as required and as directed Size of Cable : 10 Sq mm x 2 core |
| 40 | PVC Flexible conduit (ISI approved make and quality) 25 mm |
| 41 | PVC Conduit pipe (Berelia or Equivalent) thickness 1.5 mm, 25 mm |
| 42 | PVC Elbow 25 mm |
| 43 | PVC Bend 25 mm |
| 44 | PVC Junctin Box 25 mm, 4W |
| 45 | PVC Tee, 25 mm |
| 46 | PVC Board (Best quality) 100 mm x 150 mm |
| 47 | Flush Type Switch (ISI approved)5 Amp |
| 48 | 15 Amp |
| 49 | Flush Type Socket 3 pin, 5 Amp |
| 50 | Flush Type Switch Socket 3 pin, 15 Amp (5 pin) |
| 51 | Pendent holder |
| 52 | Ceiling Rose |
| 53 | Solvent Cement 100 ml bottle |
| 54 | Incandescent Bulb (BAJAJ/PHILIPS) 60 W |
| 55 | Single core copper conductor (Flxible) Industrial cables FR-LSH compound insulated 1100 volts conforming to IS:694 Havells/Crystal1.5 Sqmm |
| 56 | Mseal for general purpose |
| 57 | MS Screw (Assorted size) |
| 58 | PVC Tape (25 mtr roll) |
| 59 | Black/Red Electrical resistant rubber sheet one side chequrred & other side with cloth finish tested upto 15 KVAR as per ISS of ISI approved 1.81 mtr (L) x 0.9 tr(B)x10 mm (T) |
| 60 | Danger Plate suitable for 11 KV line conforming to IS 2552/1963 of size 250 mm x 200 mm |
| 61 | Estimate for Renovation of Main Canal from Ch. 210.00 m - 640.00 |
| 62 | CC work in proportion 1:1.5:3 with hard broken river stone aggregate from river boulder of size 6 mm to 20 mm including curing, dewatering with necessary timber shuttering, scaffolding where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately). |
| 63 | 12 mm cement plastering including clearing surface and curing, complete as directed.(i) In proportion 1:3 |
| 64 | Neat cement finishing 3 mm thick with cement slurry prepared by mixing 27.50 Kg of fresh cement in appropriate quantity of clean water to cover 10 (ten) SqM of work area and to give a smooth and hard finishing including rounding corners, brooming, curing etc, complete as directed. |
| 65 | Estimate for Renovation of Branch Canal-1 from Ch. 0.00 m - 360.00 |
| 66 | CC work in proportion 1:1.5:3 with hard broken river stone aggregate from river boulder of size 6 mm to 20 mm including curing, dewatering with necessary timber shuttering, scaffolding where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately). |
| 67 | 12 mm cement plastering including clearing surface and curing, complete as directed.(i) In proportion 1:3 |
| 68 | Neat cement finishing 3 mm thick with cement slurry prepared by mixing 27.50 Kg of fresh cement in appropriate quantity of clean water to cover 10 (ten) SqM of work area and to give a smooth and hard finishing including rounding corners, brooming, curing etc, complete as directed. |
| 69 | Estimate for Renovation of Branch Canal-2 from Ch. 0.00 m - 321.00 |
| 70 | CC work in proportion 1:1.5:3 with hard broken river stone aggregate from river boulder of size 6 mm to 20 mm including curing, dewatering with necessary timber shuttering, scaffolding where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately). |
| 71 | 12 mm cement plastering including clearing surface and curing, complete as directed.(i) In proportion 1:3 |
| 72 | Neat cement finishing 3 mm thick with cement slurry prepared by mixing 27.50 Kg of fresh cement in appropriate quantity of clean water to cover 10 (ten) SqM of work area and to give a smooth and hard finishing including rounding corners, brooming, curing etc, complete as directed. |
| 73 | Estimate for Renovation of two nos of Water Trough |
| 74 | CC work in proportion 1:1.5:3 with hard broken river stone aggregate from river boulder of size 6 mm to 20 mm including curing, dewatering with necessary timber shuttering, scaffolding where necessary, complete as directed. (Shuttering, scaffolding cost will paid separetly) |
| 75 | 12 mm cement plastering including clearing surface and curing, complete as directed. (i) In proportion 1:3 |
AI Tender Summary
Tender Timeline
Feb 05, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 25, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 25, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender