|
| 1 | STEEL/TP FURNITURERemoving/taking out carefully old unserviceable worn out/components/ parts as mentioned here-in-after of the following steel/TP furniture without disturbing the other parts and supply and fixingnew parts with material and labour as specified and as appended below, made to shape & size all as per drawing and as directed andmade to finishing to receive paint /polish and necessary welding if required,to bringout the new serviceable condition all as specified, directed and shown on drawing:- |
| 2 | FD/E6/MAP/08(R)Bed Hard MAP |
| 3 | Pre laminated particle board from the head board frame (Size of Board : 610mm x 330mm) |
| 4 | Pre laminated particle board from the foot board frame (Size of Board : 610mm x 220mm ) |
| 5 | Ply wood bed top 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge. |
| 6 | PVCShoes |
| 7 | FD-388(R)Charpoy IP Folding |
| 8 | Ply wood bed top 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge. |
| 9 | PVCShoes |
| 10 | FD/MAP/II/07 Charpoy IP Square Tube |
| 11 | Ply wood bed top 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge. |
| 12 | PVCShoes |
| 13 | FD-1033 Almirah steel large 1/2H x 1/2 Sh |
| 14 | Taking out of broken door shutter from Almirah Large Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing |
| 15 | Handle chromium platedheavy duty |
| 16 | Lock 6 lever with deuplicate key ISI marked with round shape of MS key plate |
| 17 | 3 way locking device |
| 18 | Leg made out of MS sheet 1.00mm thick |
| 19 | Hanging rod 15mm dia made out of stainless steel |
| 20 | Shelfof existing size and shape made out of MS sheet 1.00mm thick |
| 21 | FD-1034 Almirah Steel Medium 1/2H x 1/2 Sh |
| 22 | Taking out of broken door shutter from Almirah Large Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing |
| 23 | Handle chromium platedheavy duty |
| 24 | Lock 6 lever with deuplicate key ISI marked with round shape of MS key plate |
| 25 | 3 way locking device |
| 26 | Leg made out of MS sheet 1.00mm thick |
| 27 | Hanging rod 15mm dia made out of stainless steel |
| 28 | Shelfof existing size and shape made out of MS sheet 1.00mm thick |
| 29 | FD-1029 Locker Steel/ Locker Bed Side |
| 30 | Taking out of broken door shutter from Almirah Large Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing |
| 31 | Hasp & stappples of size 150 mm long chromium plated |
| 32 | Handle of size 100 mm long \"D\" Type chromium plated |
| 33 | Hanging rod made out of 20mm dia chromium plated pipe 500mm long |
| 34 | FD-157(M)Table Bed side steel |
| 35 | Topas per existng shape & size made out of MS sheet 1.00 mm thick of existing size & shape |
| 36 | Door shutter as per existng shape & sizemade out of M/S sheet 1.00 mm thick |
| 37 | Hard rubber/PVC shoe of existing shape & size |
| 38 | FD/E6/MAP/12Chair Writing Steel |
| 39 | Seat made out of12mm thick hot pressed plywood Upholstered with febric and moulded polyurethene foam with PVC lipping all round. (The polyurethene foam shall be 50mm thick and shall be moulded with density 50-55 kg per cubic meter thick and hardness 20 kg on humpden machine) |
| 40 | Back made out of12mm thick hot pressed plywood Upholstered with febric and moulded polyurethene foam with PVC lipping all round. (The polyurethene foam shall be 50mm thick and shall be moulded with density 50-55 kg per cubic meter thick and hardness 20 kg on humpden machine) |
| 41 | Hand restmade of black integral skin polyurethene with 75-85 shore \"A\" Hardness & Reinforced with MS insrest. It shall be scratch and wheather Resistant Size 210mm (Inner) and 230mm (Outer) |
| 42 | FD/E6/MAP/01 Chair Computer |
| 43 | Back made of 18/19mm thick hot presed ply wood upholstered with fabric and moulded polyurethane foam. The back frame shall be designed with contour lumber supports for extra conform with PVC lapping all arounds complete all as specified and directed. |
| 44 | Seat frame of size 510x470x60 andseat made of 18/19mm thick hot presed ply wood upholstered with fabric and moulded polyurethane foam complete all as specified and directed. |
| 45 | Hand Rest with Black intergral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant complete all as specified and directed |
| 46 | Seat machine with Black intergral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant |
| 47 | Hydraulic of Chair Computer |
| 48 | Pedestal assy injection moulded in black 30% glass filled nylon. A 10.5mm dia forged bright sinc plated MS castor pin is of press fitted into each prong for holding the castor. It is 600mm pitch centre dia |
| 49 | STEEL/TP FURNITURERemoving/taking out carefully old unserviceable worn out/components/ parts as mentioned here-in-after of the following steel/TP furniture without disturbing the other parts and supply and fixingnew parts with material and labour as specified and as appended below, made to shape & size all as per drawing and as directed andmade to finishing to receive paint /polish and necessary welding if required,to bringout the new serviceable condition all as specified, directed and shown on drawing:- |
| 50 | FD-256 Chair Varandah |
| 51 | Remove of old caning from the steel frame of chair varandah and reconditioning the frame by means of welding wherever required to bring it in original shape as per drg. |
| 52 | Supply and weave with 2mm thick new white plastic cane oval shape godrej patern and beading with 4mm thick new white plastic cane as apporeved by GE |
| 53 | PVC shoes |
| 54 | FD-255 Teapoy verandah |
| 55 | Top made out of 18mm particle board one side laminated exterior gradewith 4mm teak wood beading all around Size of particle board shall be 450mm x 300 mm. |
| 56 | PVC shoes |
| 57 | FD-1028 Book Case Steel |
| 58 | Door made out of 1.00mm thick MS Sheet |
| 59 | Sliding Roller with MS Channel 1.25mm thick |
| 60 | Glass 3mm thick |
| 61 | Handle Stainless Steel 100mm |
| 62 | Shelfmade out of MS sheet 1.00mm thick. All as shown on drg. |
| 63 | Lock 6 lever with deuplicate key ISI marked with round shape of MS key plate |
| 64 | FD/E6/MAP/02(R) Rack Shoe Steel |
| 65 | 3mm dia CR Rod of length 300mm |
| 66 | 25mm dia CR Pipe |
| 67 | 3mm dia CR Rod of length 700mm |
| 68 | PVC Shoe fixed with MS Screw |
| 69 | FD/E6/MAP/17 Teapoy verandah MAP |
| 70 | Top made of 18mm thick Pre-laminated Particle Board with teak wood beading fixed to M S frame with screw (Self Tapping hardened sheet metal screw) |
| 71 | PVC Shoe |
| 72 | FD/E6/MAP/03 Table Computer |
| 73 | Top made of 18 mm thick Pre-laminated Particle board exterior grade of size 561 x 900 mm |
| 74 | Tray made of 18 mm thick Pre-laminated Particle board exterior grade of existing shape & size |
| 75 | Drawer of existing shape & size, made of 18 mm thick Pre-laminated particle board exterior grade |
| 76 | Key board tray of existing shape & size, made of 18 mm thick Pre-laminated particle board exterior grade |
| 77 | Nylon buffers |
| 78 | WOODEN FURNITURERemoving/taking out carefully old unserviceable worn out/components parts of the following wooden furniture without disturbing the other parts and supply and fixing with new parts as specified and as appended below, made to shape & size all as per drawing and as directed and M&L of the same as listed below with new materials/components, made to finishing to receive paint /polishto bringout the new serviceable condition all as specified, directed and shown on drawing:- |
| 79 | FD-277Peg Table |
| 80 | Leg made out of 1st class teak Wood seasoned of size 30x50x362mm high |
| 81 | Top railmade out of 1st class hardwood teak of size 20mm x 40mm x380mm |
| 82 | Topmade out of 18mm pre laminated particle board one side laminated exterior gradewith 4mm teak wood beading all around |
| 83 | PVC shoes |
| 84 | FD/MAP/II/07Repair to Table Dressing Ladies W/Stool. |
| 85 | Shutter made of ply board |
| 86 | back made of 18mm thick MDF/pre-laminated particle board |
| 87 | Topmade out of 18mm thick pre-laminated particle board of size 900x380mm with 4mm thick teak wood beading on front side |
| 88 | Sidemade out of 18mm thick pre-laminated particle board one side teak face |
| 89 | Side of drawer of size 330x115mm made out of 18mm thick pre-laminated particle board |
| 90 | Back back of drawer of size 315x115x12mm |
| 91 | Bottom of drawer made out of 6mm ply wood of size 315x330mm. |
| 92 | Stainless Steel Handle 50mm |
| 93 | Magnetic Catcher |
| 94 | Top of Stoolof existing shape & size made out of plywood 12mm thick BWR IS-303 |
| 95 | wheel of Stool |
| 96 | 75 mm 40D Cushion covered of Stool |
| 97 | SS Telescopin channel |
| 98 | Mirror framemade out of teak wood well seasoned size 3130x19x25mm |
| 99 | Mirrorof size 1220x365x5.5mm thick |
| 100 | 6mm th ply for back of mirror |
| 101 | FD-230Table dressing gents with mirror |
| 102 | Frame of mirrormade out of well seasoned teak wood of size 19x25x2320mm |
| 103 | Back ply of mirror 6mm thick of size 380x760mm |
| 104 | Mirrorof size 380x760mm, 5.5mm thick |
| 105 | Top of table made out of 1st class teak wood plank of size 900x300x 12mm |
| 106 | Back of tablemade out of 1st class teak wood plank of size 900x135x12mm |
| 107 | Side oftable made out of 1st class teak wood plank of size 300x135x12mm |
| 108 | Bottom of tablemade out of 1st class teak wood plank of size 900x300x12mm |
| 109 | Front of drawermade out of 1st class teak wood plank well seasoned of size 285x125x12mm |
| 110 | Back of drawerof size280x115(Back side) made out of 12mm thick well seasoned 1st class HW(Teak) |
| 111 | Side of drawer and providing the new one of size 280x130 made out of 12mm thick well seasoned 1st class HW(Teak) |
| 112 | Bottom of drawerof 6mm thick BWR plywood of size 290x265 |
| 113 | Stainless Steel Handle 50mm |
| 114 | FD/MAP-II/03 Table dining 6 Pers (MAP ) |
| 115 | Table top made out of 18/19mm thick prelaminated particle board one side teak veneeredwith teak wood beading all around |
| 116 | Leg of size 750x45x90mm made out of 1st class well seasoned teakwood duly fixing PVC rubber shoe at the bottom of legswith mild steel screws |
| 117 | Long rail of size 1500 x 45 x 90 mm made out of 1st class well seasoned teakwood |
| 118 | Short top rail of size 900 X 45 X 90 MM . made out of 1st class well seasoned teakwood |
| 119 | MS Right angleof size 150 x 30 x 5 mm |
| 120 | PVC Shoes |
| 121 | FD/MAP-II/03 Table dining 4 Pers (MAP ) |
| 122 | Table top made out of 18/19mm thick prelaminated particle board one side teak veneeredwith teak wood beading all around |
| 123 | Leg of size 750x45x90mm made out of 1st class well seasoned teakwood duly fixing PVC rubber shoe at the bottom of legswith mild steel screws |
| 124 | Long rail of size 1200 x 45 x 90 mm made out of 1st class well seasoned teakwood |
| 125 | Short top rail of size 900 X 45 X 90 MM . made out of 1st class well seasoned teakwood |
| 126 | MS Right angleof size 150 x 30 x 5 mm |
| 127 | PVC Shoes |
| 128 | FD-229 Chair Easy |
| 129 | Front Legs made out of 1st class HW well seasoned (Teak) |
| 130 | Front rail of seat frame (Hole should be 12.5mm apart of each other), made out of 1st class HW well seasoned (Teak) |
| 131 | Side Rail, made out of 1st class HW well seasoned (Teak) |
| 132 | Back Rail, made out of 1st class HW well seasoned (Teak) |
| 133 | Arm Rest, made out of 1st class HW well seasoned (Teak) |
| 134 | Supply and weaving with 2 mm thick new white plastic cane oval shape Godrej pattern and beading with 4mm thick new white plastic cane |
| 135 | PVC Shoes |
| 136 | FD-246Bed |
| 137 | head board (both side) frame of bed.Made out of plywood 4mm thick one side teak face(Size of ply : 780mm x 340mm) |
| 138 | foot board (both side) frame of bed.Made out of plywood 4mm thick one side teak face(Size of ply : 780mm x 180mm) |
| 139 | Legs (head) made out of teak wood.Size of leg 60mmx 60mm x 860mm |
| 140 | Legs (foot) made out of teak wood.Size of leg 60mmx 60mm x 500mm |
| 141 | Long rail of size : 35mm x 90mm x 1980mm made out of Teak wood well seasoned |
| 142 | Plywood 12mm thick BWR IS-303 for bed top |
| 143 | FD-241side board |
| 144 | Leg made out of 1st class teak wood well seasoned |
| 145 | Stainless steel handle 50mm |
| 146 | Plywood 6mm thick BWR for back |
| 147 | Shutters made out of 18mm thickparticleboard exterior grade one side teak face and other side balancing white |
| 148 | Shelves made out of 18mm thickparticleboard exterior grade one side teak face and other side balancing white |
| 149 | Drawers made of 1st class hard seasoned teak wood free from knots |
| 150 | Top made out of prelaminated particleboard one side teak face and other side commercial/balancing white exterior grade with french polished teak wood edging all around |
| 151 | WOODEN FURNITURERemoving/taking out carefully old unserviceable worn out/components parts of the following wooden furniture without disturbing the other parts and supply and fixing with new parts as specified and as appended below, made to shape & size all as per drawing and as directed and M&L of the same as listed below with new materials/components, made to finishing to receive paint /polishto bringout the new serviceable condition all as specified, directed and shown on drawing:- |
| 152 | FD-278Teapoy |
| 153 | Topmade out of 18mm particle board one side laminated exterior gradewith 4mm teak wood beading all aroundSize of particle board shall be 450mm x 300 mm. |
| 154 | Legs of existing shape and size made of 1st class hard seasoned teak wood free from knots |
| 155 | Top railmade of 1st class hard seasoned teak wood free from knots . |
| 156 | Short railmade of 1st class hard seasoned teak wood free from knots . |
| 157 | PVC shoes |
| 158 | FD-275Table writing |
| 159 | topmade out of 18mm particle board one side laminated exterior gradewith 4mm teak wood beading all around |
| 160 | sides made out of 19mm prelaminated particle board one side teak veneered |
| 161 | shutter made out of 19mm thick prelaminated particle board one side teak veneered bonded with phenol formaldehyde exterior gde |
| 162 | drawers made out of prelaminated particle board & 1st class well seasoned teakwood for sides and front & 6mm thick commercial plywood for bottom of drawers |
| 163 | MS butt hinges 50mm medium wt cold rolled mild steel. |
| 164 | stainless steel handle 50mm |
| 165 | plywood back of table writing & supply & fix new 6mm thick 5 ply plywood commercial BWR gde type BB fixed with 20mm mild steel screws |
| 166 | legs made out of 1st classs well teak wood |
| 167 | long rail made out of 1st class well seasoned teak wood |
| 168 | short rail made out of 1st class well seasoned teak wood |
| 169 | long stiffiner made out of 1st class well seasoned teak wood |
| 170 | Short stiffiner made out of 1st class well seasoned teak wood |
| 171 | PVC shoes |
| 172 | FD-281Sofa set 4 Seater |
| 173 | Front Legmade out of Teak wood well seasoned |
| 174 | Rear Legmade out of Teak wood well seasoned |
| 175 | Front Railmade out of Teak wood well seasoned |
| 176 | Back Railmade out of Teak wood well seasoned |
| 177 | Arm Restmade out of Teak wood well seasoned |
| 178 | back wdn bearersmade out of Teak wood well seasoned |
| 179 | bottom wdn bearersmade out of Teak wood well seasoned |
| 180 | 100 mm thick x 40 density of size 530x560mm covered with new tapestrycloth duly stitched |
| 181 | FD-281Sofa set (3+1+1) Seater |
| 182 | Front Legmade out of Teak wood well seasoned |
| 183 | Rear Legmade out of Teak wood well seasoned |
| 184 | Front Rail (long sofa)made out of Teak wood well seasoned |
| 185 | Back Rail(long sofa) made out of Teak wood well seasoned |
| 186 | Front Rail (single sofa)made out of Teak wood well seasoned |
| 187 | Back Rail(single sofa) made out of Teak wood well seasoned |
| 188 | Arm Restmade out of Teak wood well seasoned |
| 189 | back wdn bearersmade out of Teak wood well seasoned |
| 190 | bottom wdn bearersmade out of Teak wood well seasoned |
| 191 | 100 mm thick x 40 density of size 530x560mm covered with new tapestrycloth duly stitched |
| 192 | FD-274Table Centre. |
| 193 | leg made out of 1st class teak Wood seasoned of size60x30x356mm |
| 194 | top railmade out of 1st class hardwood teak of size 20x50x900mm |
| 195 | top rail of size 20x50x450mm and shape made out of 1st class HW well seasoned teak |
| 196 | top made out of 18 mm prelaminated particle board |
| 197 | PVC shoes |
| 198 | FD-233Hat Stand |
| 199 | looking mirror ofsize 460x300mm 5.5mm thick |
| 200 | Board made out of 19mm thick prelaminated particle board one side teak face |
| 201 | brass peg hook |
| 202 | FD/E6/MAP/09Bin Linen Multipurpose |
| 203 | legs made out of 1st class teak wood well seasoned |
| 204 | stainless steel handle 50mm |
| 205 | back plyplywood 6mm thick BWR |
| 206 | shutters made out of 18mm thickparticleboard exterior grade one side teak face and other side balancingwhite |
| 207 | drawers made of 18mm thickparticleboard exterior grade |
| 208 | top made out of prelaminated particleboard one side teak face and other side balancing white exterior grade with french polished teak wood edging all around |
| 209 | Magnetic Catcher |
| 210 | WOODEN FURNITURERemoving/taking out carefully old unserviceable worn out/components parts of the following wooden furniture without disturbing the other parts and supply and fixing with new parts as specified and as appended below, made to shape & size all as per drawing and as directed and M&L of the same as listed below with new materials/components, made to finishing to receive paint /polishto bringout the new serviceable condition all as specified, directed and shown on drawing:- |
| 211 | FD/E6/MAP/ 16 Mirror Dressing Gents |
| 212 | looking mirror of size 1130x530x5.5 mm thick silver coated |
| 213 | glass shelf of size 5.5mm thick |
| 214 | BAck ply of mirror dressing gentsof size 1170mmx540mmx6mm thick 5 ply BWR grade |
| 215 | Material & labour for preparing old painted steel surfaces by removing dents and bends, clipping, welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying two coat of synthetic enamel paint 1st Quality OG/SMOKE GRAY/BLACK OR AS APPROVED by GE paint both inside and outside (outside only in case of round/square pipe/tube) by spray painting all as specified in particular specification and as shown on drawing and as directed by Engineer-in-Charge for the following articles of Steel furniture/TP furniture :-(Note : Second coat will be done after complete dried up of 1st coat as and when ordered and approval of 1st coatfrom GE |
| 216 | FD/E6/MAP/08(R)Bed Hard MAP |
| 217 | FD-388(R)Charpoy IP Folding |
| 218 | FD/MAP/II/07 Charpoy IP Square Tube |
| 219 | FD-1033 Almirah steel large 1/2H x 1/2 Sh |
| 220 | FD-1034 Almirah Steel Medium 1/2H x 1/2 Sh |
| 221 | FD-1029 Locker Steel/ Locker Bed Side |
| 222 | FD-157(M)Table Bed side steel |
| 223 | FD/E6/MAP/12Chair Writing Steel |
| 224 | FD/E6/MAP/01 Chair Computer |
| 225 | FD-256 Chair Varandah |
| 226 | FD-255 Teapoy verandah |
| 227 | FD-1028 Book Case Steel |
| 228 | FD/E6/MAP/02(R) Rack Shoe Steel |
| 229 | FD/E6/MAP/17 Teapoy verandah MAP |
| 230 | FD/E6/MAP/03 Table Computer |
| 231 | Material and Labour for Complete removal of total existing painting/polish and applying two coats of high gloss polyurethane enamel paint (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss)by spray painting method over and including a coat of pink primerand prepration of surfaces Complete all as specified and as directed for the following furnitures :- |
| 232 | FD-277Peg Table |
| 233 | FD/MAP/II/07Table Dressing Ladies W/Stool. |
| 234 | FD-230Table dressing gents with mirror |
| 235 | FD/MAP-II/03 Table dining 6 Pers (MAP ) |
| 236 | FD/MAP-II/03 Table dining 4 Pers (MAP ) |
| 237 | FD-229 chair Easy |
| 238 | FD-246 Bed |
| 239 | FD-241 side board |
| 240 | FD-278 Teapoy |
| 241 | FD-275Table writing |
| 242 | FD-281Sofa set 4 Seater |
| 243 | FD-281Sofa set (3+1+1) Seater |
| 244 | FD-274Table Centre. |
| 245 | FD-233Hat Stand |
| 246 | FD/E6/MAP/09Bin Linen Multipurpose |
| 247 | FD/E6/MAP/ 16 Mirror Dressing Gents |
