|
| 1 | Surface dressing including bushes and plants in soft loose soil n exc15 cm deep. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft loose soil & refilling of earth as required. |
| 3 | Cement concrete type D21:4:8 (40mm graded aggregate) in foundations, filling and mass concret.M&L |
| 4 | Cement concretetype B1 1:2:4 (20mm graded aggregate) Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 5 | Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter. |
| 6 | Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6.M&L |
| 7 | M&L forrendering 12 mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces on wall complete all as specified and directed to be finished even and smooth (without using extracement. |
| 8 | Preparation of new surface Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)M&L |
| 9 | Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.S&F |
| 10 | Mild steel TMT bars05 mm to 10 mm dia and over ,cut to length , bent to shape required in stirrups, spacers and binders, including cranking , bending spirally or hooping and binding with 0.9mm dia wire annealed.S&F |
| 11 | Mild steel TMT bars10 mm dia and over ,cut to length , bent to shape required , including cranking , bending spirally or hooping and binding with 0.9mm dia wire annealed.S&F |
| 12 | Providing and fixing G.I. chain linkfabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charg Made of G.I. wire of dia 4 mm.S&F |
| 13 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. soft loose soil. |
| 14 | Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6.M&L |
| 15 | Flush pointing to random rubble masonry, uncoursed or brought upto courses built in cement mortar 1:4.M&L |
| 16 | Providing, cement concrete B0 1:2:4(12.5mm graded aggregate) in copingskerbs, rounded or chamfered on edges. |
| 17 | Prepairation of new steel surfaces and painting of synthetic enamel two coat on steel surfaces withof any description, over 10 cm in width or girth, not otherwise described.M&L |
