Name of Work : Supply and laying of 3 ½ x 240 sqmm LT UG XLPE 110V grade aluminium conductor cable from substation No.2 to type-I substation.
Sl. No.
Item Description
1
Excavation in trenches not exceeding 1M deep in hard dense soil and getting out for laying under ground electric LT Cable
2
Returning and filling in including spreading ,levelling watering and well ramming in layers not exceeding 25CM thick
3
Supply and filling of sand in cable trenchesand levelling
4
Supply and paving of bricks sub clause\"B\" laid flat dry in cable trenches.
5
Road cutting not exceeding 1 Mdeep in soft integrated rock and getting it out for laying UG LT Cable
6
Supply & provdiding cement concrete on floor 1:2:4 mix with 12.5MM grade aggregate and fine smoothing with extra cement for foundation & coping of 03 street light pole.
7
Supply & providing medium grade pipe GI of bore 150 mm for inserting the cable inside the pipe & laying on floor
8
Supply and laying armouredHeavy Duty PVC/XLPE insulated cable aluminium conductor served with an ineer sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 240 Sq.mm 3 1/2 core including termination at both ends with suitable glands and eye lugs Make:universal,Finolex and Havells, polycab, Golster
9
Trenchless Horizontal Directional Drilling (HDD) of bore size 200mm dia in any type of soil/rock using advance specialised rigger/HDD equipment andcapable of sensing/detecting the under ground clearance for boring. The bore should be made in the ground under minimum depth of 5-6 feet depth and to supply & lay of 200mm dia HDPE pipe in the bore made including laying of LT UG cable 3 ½ x 240Sqmm cable in the HDPE pipe laid in the bore .The work includes Material & Labour for complete scope of work except supply of LT UG cable of 3 ½ x 240Sqmm cable .Note :while execution of the work , any damage to existing pipe ,water line, electrical cable or supply etc any damage to govt. property,it is the responsibility of the contractor to rectify it immediately and it will be borne by the contractor at any cost.
10
Supply & fixing of Indoor LT cubical panel 12 SWG CRCA sheet powdered coated, 400A Al.busbar insulated with 400 A ACB -1No. for incomer&200A MCCB with handle -03Nos ,125A MCCB with handle -03Nos ,63A MCCB with handle -02Nos for outgoing with Digital metering panel consisting of Voltmeter, Ammeter & multifunctional meterfor monitoring of KWH,P.F,Current ,Voltage ,KVA,Tripping system & Earth fault Relay including single phase preventerACB Make :L&T,schneider & GE Model .Entelliguard with Micro processor based release ,O/L,S/C ,E/F,Make ofMCCB : Siemens/ L&T, Make of Measuring Instrument: AE / Krycard/ LT/Schneider
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
