Tender For Repairs To Ac Sheet, Roof Of Certain Clps/ Esh/Building In Zone I Depot Area At Cad Pulgaon
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Feb 2025
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pulgaon → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs To Ac Sheet, Roof Of Certain Clps/ Esh/Building In Zone I Depot Area At Cad Pulgaon
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of AC sheets/transculent sheet (corrugated/semi corrugated) as in roof covering including ridges/valley gutter, removal and re-fixing of existing lightning conductors/ strips / assembly complete all as specified and directed. |
| 2 | S & F pre-painted galvalume aluminium zinc coating GI based corrugated /semi corrugated approved profile and of any shape steel sheet0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding making good with L-type or J-type or cranked hook bolts screws complete all as specified and directed. |
| 3 | S&F in repairs of rolled sections Fe-410W (Gde E-250)as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, wind ties etc alsocomplete all as specified and directed.Note: 1. For demolition, power for drilling machine, breaker and for using welding machine etc will be supplied by mobile generator on own arrangement by contractor 2. Wastage of time for TFF issue from ISO/Fire station (as usage of generator involved) may be considered while quoting. |
| 4 | S&F 1mm thick PGI sheet with zinc coating @ 275 grams per sqm on both sides in valley gutter with 150mm lap joint water proof as directed cut to size and bent to shape turning up and down including stopped end punching holes and making with head screws to support with bitumen washers complete all as specified and directed. |
| 5 | S&F in repairs Cast iron rainwater socketed pipes 150 mm with cement joints, without ears including necessary jointing, sealing silicon gel , clamping complete all as specified and directed. |
| 6 | S&F in repairs Cast Iron Bends or elbows, square. or obtuse of dia 150mm including jointing, sealing of joints by silicon gel etc. complete all as specified and directed. |
| 7 | Material & Labour for painting with two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces exc 10cm width or girth including preparation of new steel surfaces complete all as specified and directed. |
| 8 | M & L preparation of old painted of steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of Aluminium Paint over aluminium red oxide primer over rusted aluminium surfaces complete all as specified and directed. |
| 9 | M & L in repairs for rendering 15 mm thick in CM 1:4 on brick work or concrete surfaces of external wall finished even and smooth without using extra cement complete all as specified and as directed. |
| 10 | M & L preparation of newly plastered surface on external wall surfaces and applying two coats of cement base paint over over a coat of primer complete all as specified and as directed. |
| 11 | Fixing only in repairs of rolled sections Fe-410W (Gde E-250)as in main and cross beams, hip and jack rafters; purlins, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, wind ties etc alsocomplete all as specified and directed.Note: 1. For demolition, power for drilling machine, breaker and for using welding machine etc will be supplied by mobile generator on own arrangement by contractor 2. Wastage of time for TFF issue from ISO/Fire station (as usage of generator involved) may be considered while quoting. |
| 12 | M & L oblitering old writing of any description n. exc 0.10sqm with synthetic enamel paint to match existing work complete all as specified and directed. |
| 13 | M & L for writing letters of figures (Black Roman, Italic or Indian) n. exc 30cm heightcomplete all as specified and directed. |
| 14 | Cleaning of open drain of any typeand of anygirth of by removing dirt,mudcutting vegetable growth by excavationon orby any means and removing to a distance 50 Meter complete all as specified and as directed. |
| 15 | Demolition of brick/stone masonry walls built in cement mortar including all quoins, arches, pillars, retaining walls etc. complete all as specified and directed. |
| 16 | M & L for brick work fly ash brick with old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 17 | M & L in for rendering 15 mm thick in CM 1:4 on brick work or concrete surfaces of external wall finished even and smooth without using extra cement complete all as specified and as directed. |
| 18 | Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.Note: 1. For demolition, power for drilling machine, breaker etc will be supplied by mobile generator on own arrangement by contractor2. Wastage of time for TFF issue from ISO/Fire station (as usage of generator involved) may be considered while quoting |
| 19 | M&L for PCC 1:3:6 type C-2 (40mm graded stone agg.) concrete in surface channels and Saucer drains etc complete all as specified and directed. |
| 20 | M&L for cement concrete 1:2:4 type B1, (20mm graded aggregate) as incopings, cills, sesmic and similar bands, plinth courses, string courses,lacing courses, parapet etc including weathering, slightly rounded or chamfered angle and throating and use of formwork complete all as specified and directed. |
| 21 | M & L preparation of new of steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of Aluminium Paint over aluminium red oxide primer over rusted aluminium surfaces complete all as specified and directed. |
| 22 | M & L preparation of old painted of steel and iron surfaces of any description, n exc 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel/ Aluminium Paint over aluminium red oxide primer over rusted aluminium surfaces complete all as specified and directed. |
| 23 | M & L preparation of new of steel and iron surfaces of any description, n exc 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel/ Aluminium Paint over aluminium red oxide primer over rusted aluminium surfaces complete all as specified and directed. |
| 24 | S&F6mm thick asbestos cement, corrugated or semi corrugated sheets in roof etc fixed with L or J or cranked hooks bolt complete all as specified and directed. |
| 25 | All as per item No 24 here in before but fixing only (except sheets). Note- Old AC sheet obtained vide item No 24 above shall be reused. |
| 26 | S& F plain black 0.63mm thick mild steel sheeting, in ridges, hips,valley gutters, drip and straight flashing (length and girth as fixed) complete all as specified and directed. |
| 27 | All as per item No 26 here in before but fixing only except sheeting all as directed. |
AI Tender Summary
Tender Timeline
Feb 04, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 24, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 04, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender