|
| 1 | SH I : Dismantling of old elevator and SITC of New ElevatorDismantling of Existing G+7, 6 Passenger Elevator(408 KG, Make: Johnson ) and handover to the AAI, including organizing safety protocols, such as barricades, warning signs, protective gear for workers. Removing of rails,doors,wiring,sensors,motor,drive system, counter weights and other structural elements all necessary arrangements complete as required. |
| 2 | SITC of Machine Room Less (MRL) Electric traction type Lift of 8 Passenger, 544 Kgs capacity suitable for operation on 415 Volts (+/- 5%), 3 phase, 50 Hz AC supply, having AC Variable Voltage and Variable Frequency type traction control, minimum speed of 1 Mtr/ sec, electro magnetic brake system, simplex mode operating panel with luminous buttons with brails marking, overload warning indicator, battery operated alarm bell, LED type emergency light, intercom suitable for hook up to AAI’s EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman’s switch at ground floor, digital car positions indicator in car and at all positions indicator in car at all floors with UP/ DOWN direction, Concealed decorative LED light fixtures, ventilation fan (Axial pressure fan),SS tubular Hand Rail (03 side), etc complete with all accessories including Automatic Rescue Device (ARD) and Manual Rescue Device (MRD) in the event of power failure etc., as per enclosed technical specifications and special conditions as required. The traction motor of machine room less lifts shall be of gearless type and placed inside the lift hoist way. The Lift shall be with following details 08 Stops, 08 Openings (Ground+7 floors) and entrance at front side on all the serving floors, automatic centre opening stainless steel hairline finish door, car enclosure provided with Stainless Steel Hairline finish panel on sides and with travel height of 30 mtrs (Approx). |
| 3 | Providing and laying in position cement concrete of specified grade.1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Cement Plastering (In fine Sand) with 20mm Cement Plaster of mix in 1:4 (1 Cement: 4 fine sand) for covering of holes as per site condition etc., complete as required. |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Providing of Scaffolding for dismantling of existing lift and white wash in lift shaft area until completion of two concernworks including all necessary arrangements complete as required. |
| 7 | Wall painting with white cement less than 50 grams per litre of appproved brand and maufacture, including applying two coats whatever required to achieve even shade and colour at lift shaft area. |
| 8 | Demoilishing cement concrete manually by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix (Including equivalent design mix) |
| 9 | SH II: AICMC of Elevator:All Inclusive comprehensive Maintenance contract for lift installed as per of Sl No 2 i/c carrying out monthly servicing and complete preventive maintenance of all components as per OEM standardsi/c attending all breakdown repairs within 24 hours complete as per instructions of Engineer-in-Charge as required (after 1 year of DLP). |
| 10 | 1st year |
| 11 | 2nd year |
| 12 | 3rd year |
| 13 | 4th year |
| 14 | 5th year |
