Annual Plan-Madayi Gp Pr.No.67/25 Vengara Priyadarshini Road Retarring-In Madayi Gp 2024-25 Mgr 500000)-General Civil Work
Tender Value
4.22 Lakhs
Estimated cost
Bid Submission
10 Feb 2025
0 days left
EMD
10574
Bank guarantee accepted
Document Fee
935
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
madayi → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Plan-Madayi GP Pr.No.67/25 Vengara Priyadarshini Road Retarring-In Madayi GP 2024-25 MGR 500000)-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Road maintenance |
| 2 | 2.14.2.A:Dismantling of Flexible Pavements Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202(II) By Mechanical Means (A) Bituminous Courses |
| 3 | 4.1.A.3:Granular Sub-base with Well Graded Material (Table 400.1)(A) By Mix in Place MethodConstruction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (iii) For Grading III Material |
| 4 | 4.9:Wet Mix MacadamProviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.By Mechanical Means with 1 km lead |
| 5 | 75.5.1.1pb:Prime Coat - Low porosity - With Packed Bitumen RatesProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 |
| 6 | 75.5.2.3pb:Tack Coat - With Packed Bitumen RatesProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 7 | OD311208/2024-2025:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 using Shredded Plastic Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates coated with shredded plastic (3% by weight of bitumen) as per standard procedure using penetration grade bitumen to required line, grade and level to serve as wearing course on apreviously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN staticroller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means:- TypeA (II) Bitumen (S-65) |
| 8 | 3.14:Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. |
| 9 | OD260276/2024-2025:Supplying and fitting Name board of size 75 x 45 cm made with GI plain sheet 1.25mm thick(Class III) fitted with 35 x 35 x 4 mm MS angle 2 nos horizontally and 3 nos vertically to makea frame for strengthening the GI sheet, fitted 2 nos 32 mm GI pipe vertically 90 cm aboveground level and fixing in cement concrete 1:2:4, 30 x 30 x 30 cm including cost andconveyance of all materials, all labour charges, fabricating etc. complete. |
| 10 | 10.1.2:Printing New Letters and Figures of any Shade Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per drawings and Technical Specification Clause 1701 English and Roman |
AI Tender Summary
Tender Timeline
Feb 03, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 10, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 13, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender