Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Zone-1 |
| 2 | Pump House |
| 3 | Provide all materials, labour, T&P complete Pump Housesize (3.60 x 3.00 x 3.00 m) cum chlornating room (2.25 x2.25 x 3.00 m) as per type design. |
| 4 | Repairing of Pump house |
| 5 | I class brick work in 1 : 4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 6 | Dismantling existing plaster over damage/cracked surfaceincluding supply of all materials, labour T&P etc. required for proper completion of the work. |
| 7 | Racking of supply of all materials, labour T&P etc. for new plaster work including supply of all materials, labour T&P etc required for proper completion of the work.. |
| 8 | 12 mm thick plaster with cement & coarse sand mortar in 1:1:6 over brick work minimum thickness not to be less than 12 mm finished with 3 mm floting coating of neat cement including supply of all materials, labour T&P etc. required for proper completion of work |
| 9 | Repair for electric fitting |
| 10 | Reparing of floor in P.C.C. 1:2:4 |
| 11 | Firstclass brick work in 1:4 cement and local sand mortar in superstructure including supply of all materials labour T&P etc required for proper completion of For construction of apron 0.6 m wide work.structure including supply of all materials labour T&P etc required for proper completion of For construction of apron 0.6 m wide work. |
| 12 | Same as item no. 3 above but 25 mm thick PCC floor laid over base concrete consisting of cement, local sand and 40mm gauge first class brick ballast in the proportion of 1:4:8. For construction of apron 0.6m wide. |
| 13 | Supply and fixing of flush door including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 14 | Supply and fix angle iron door chaukhat of size 50mm x 50mm x 6 mm including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 15 | 1. Door frame (2 Nos.) |
| 16 | 2. Window frame (4 Nos.) |
| 17 | Supply and fixing of 1mm thick sheet iron panelled door/ windowshutters including supply and fixing and adjustment of Cleats, stops, hings, locks, bolts, handles. Spring and other fittings. ( Excluding supllyof fittings). |
| 18 | Supply of oxidized iron fittings of approved make for doors and window. |
| 19 | 11.5 cm string or drip-coarse in 1:6 cement and local sand mortor. |
| 20 | Painting or varnishing new iron work in small areas or new wood work with one priming coat and two coats of approved paints or varnish including supply of all materials labour, T&P etc required for proper completion of work. |
| 21 | White cement in three coats including supply of all materials labour, T&P etc required for proper completion of work. |
| 22 | Providing plaster of Paris wall putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 23 | Apex Ultima /Acrylic Exterior/ interior paint of approved brand &manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work. |
| 24 | Supply and fixing 3 mm thick plain glass in windows including supply of all materials labour, T&P etc required for proper completion of work. |
| 25 | Supply and fixing of 100 mm dia CI pipe rain water down pipe withclamp etc. |
| 26 | RISING MAIN AND BYE PASS ARRANGEMENT (ZONE-I) |
| 27 | Supply of the following pipes including railway freight, insurancecharges F.O.R. etc. complete. |
| 28 | 200 mm dia D.I. Class K-9 |
| 29 | From Tube wells to OHT including bye pass |
| 30 | Supply of D.I. specials for the above pipe lines 10% of the item 1 |
| 31 | Carting, laying and jointing of the following sizes of pipes into thetrenches including cost of all all labour jointing materials,and t&p etc testing etc. complete. |
| 32 | From Tube wells to OHT including bye pass |
| 33 | Earth work in ordinary soil with lift upto 1.50 m and lead upto 50 m,filling, watering and ramming of excavated earth into the trenchesand disposal of surplus earth upto 50 m. |
| 34 | Supply of following sizes of C.I. D/F sluice valves as per I.S. 780-1960 tested to 10 Kg/sqm fixing in pipe line trenches, jointing and testing complete. |
| 35 | 200 mm dia |
| 36 | Carting of D/F sluice valves of following sizes to the site of workslowering them into already prepared trenches and fixing them inposition including supply of jointing materials such as bolt nut, rubber insertion white lead complete with excluding values and specials required but including the testing etc. complete excluding values and specials required but including the testing etc. complete. |
| 37 | 200 mm dia |
| 38 | Supply of all materials, labour, T&P and construction of followingchambers as per type design including supply and materials, labour and T&P, testing etc. complete. |
| 39 | Masonry Type |
| 40 | Supply of all materials, labour, and T & P etc. and construct R.C.C.thrust blocks. |
| 41 | R.C.C. work in 1:1.5:3. |
| 42 | 200 mm dia |
| 43 | Mild steel work |
| 44 | 200 mm dia |
| 45 | Dismantling and reinstatement of following type of road surfaces for lying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials. |
| 46 | C.C. Road |
| 47 | Civil work for Rebore Tube well (as per Unit Estimate) |
| 48 | Housing Chamber of Tubewell of standard Size with Cover |
| 49 | REPAIRING OF ONE NO. EXISTING CWR CUM PUMP HOUSE (CAPACITY 800 Kl) (ZONE-I) |
| 50 | For Clear Reservoir Tank |
| 51 | Cleaning of Surface area of CWR including all labour and T&P etc.complete. |
| 52 | Providing and applying one coat of slurry of hydrophilic in nature forwaterproofing treatment of internal surface of Tank. |
| 53 | Repairs of Tank wall, water tighteing work including all labour,material etc required for completion of work |
| 54 | Dismantling existing plaster over damage/cracked surfaceincluding supply of allmaterials, labour T&P etc. required for proper completion of the work. |
| 55 | Stacking/proper disposal of chiseld plaster as directed by the Engineer- in-charge. |
| 56 | 12 mm thick plaster with cement & coarse sand mortar in 1:1:6 over brick work minimum thickness not to be less than 12 mm finished with 3 mm floting coating of neat cement including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 57 | Repairs of cracks on concret surface of tank including all labour,material extraholding etc required for completion of work. |
| 58 | White cement in three coats including supply of all materialslabour, T&P etc required for proper completion of work. |
| 59 | Providing plaster of Paris wall putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 60 | For Pump House over CWR |
| 61 | I class brick work in 1 : 4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour T and P etc. required for proper completion of the work. |
| 62 | Dismantling existing plaster over damage/cracked surfaceincludingsupply of all materials, labour T&P etc. required for proper completion of the work. |
| 63 | 12 mm thick plaster with cement & coarse sand mortar in 1:1:6 over brick work minimum thickness not to be less than 12 mm finished with 3 mm floting coating of neat cement including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 64 | Repair for electric fitting |
| 65 | First class brick work in 1:4 cement and local sand mortar in superstructure including supply of all materials labour T&P etc required for proper completion of For construction of apron 0.6 m wide work. |
| 66 | Supply and fixing of flush door including supply of all materials, labourT&P etc. required for proper completion of the work. |
| 67 | Supply and fix angle iron door chaukhat of size 50mm x 50mm x 6 mm including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 68 | 1. Door frame (2 Nos.) |
| 69 | 2. Window frame (4 Nos.) |
| 70 | Supply and fixing of 1mm thick sheet iron panelled door/ windowshutters including supply and fixing and adjustment of Cleats, stops, hings, locks, bolts, handles. Spring and otherfittings.( Excluding suplly |
| 71 | Supply of oxidized iron fittings of approved make for doors and window. |
| 72 | Painting or varnishing new iron work in small areas or new wood work with one priming coat and two coats of approved paints or varnish including supply of all materials labour, T&P etc required for proper completion of work. |
| 73 | White cement in three coats including supply of all materialslabour, T&P etc required for proper completion of work. |
| 74 | Providing plaster of Paris wall putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 75 | Apex Ultima /Acrylic Exterior/ interior paint of approved brand &manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work. |
| 76 | Supply and fixing 3 mm thick plain glass in windows including supply of all materials labour, T&P etc required for proper completion of work. |
| 77 | Supply and fixing of 100 mm dia CI pipe rain water down pipe with |
| 78 | Sclaitmpe clearenceetc. and other unforseen items. |
| 79 | REPAIRING OF ONE NO. EXISTING OVERHEAD TANK (2500 Kl/20M) (ZONE-I) |
| 80 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S.tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after.The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.(As Per DSR) |
| 81 | Providing and applying one coat of slurry of hydrophilic in nature forwaterproofing treatment of internal surface of the Over Head Tank. (Rate From Delhi Schedule of rates.) |
| 82 | Supply and fixing of scaffolding in internal dome required for the proper completion of above work. |
| 83 | Stacking/Proper disposal of dismantled plaster material as directed by the Engineer-in-charge. |
| 84 | Supply of all material labour T&P vertical pipe including fixing of all D.I pipe after dismantling. |
| 85 | Painting, Colour washing of OHT, ladder, with approved quality paint. (Asian Apex Paint) |
| 86 | Reparing and fixing of G.I. Railing hand post, stair case |
| 87 | Supply of sluice valves with all material, labour T&P etc complete |
| 88 | 200 mm dia |
| 89 | Earth filling in flooring of tank . |
| 90 | DISTRIBUTION SYSTEM (ZONE-I) |
| 91 | Excavation for pipe line trenches in Ordinary soil,(lime, clay or sand Including lift up to 1.5m and lead up To 50m and refilling, watering, Ramming of excavated earth in to trenches and disposal of surplus earth up to 50 m from the center of the foundation trenches. |
| 92 | Supply of the following sizes of pipes confirming to I.S. 4984:1995, I.S.-8329/2000 latest relevant of I.S.S. with couplers etc complete in all respect F.O.R. destination including all taxes and insurance. |
| 93 | HDPE Pipe PN-6 (O. D.) PE-100 |
| 94 | 90 mm dia |
| 95 | 110 mm dia |
| 96 | 140 mm dia |
| 97 | 160 mm dia |
| 98 | DI Pipe K-7 |
| 99 | 200 mm dia |
| 100 | 250 mm dia |
| 101 | 300 mm dia |
| 102 | 350 mm dia |
| 103 | 500 mm dia |
| 104 | Supply of Specials for above pipe F.O.R destination includingall Taxes and insurance. |
| 105 | HDPE Pipe PN-6 (O. D.) PE-100 |
| 106 | DI Pipe K-7 |
| 107 | Carting from the store (up to 8 Km.) The following sizes of pipe and specials to the site of work lowering them in to trenches and laying true to alignment and gradient including jointing of pipe with electrofusion sockets, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. complate but excluding cost of trenching and cutting of pipes etc. For making of lengths but including making joints. |
| 108 | HDPE Pipe PN-6 (O. D.) PE-100 |
| 109 | 90 mm dia |
| 110 | 110 mm dia |
| 111 | 140 mm dia |
| 112 | 160 mm dia |
| 113 | DI Pipe K-7 |
| 114 | 200 mm dia |
| 115 | 250 mm dia |
| 116 | 300 mm dia |
| 117 | 350 mm dia |
| 118 | 500 mm dia |
| 119 | Supply of following types of fittings including railwaysfreight, cartage up to store, all taxes and duties complete. |
| 120 | C.I. Double flanged Sluice /Scour Valves as per I.S. 780/1969class-1 working pressure 10 Kg/sqm F.O.R Destination including all taxes and insurance. |
| 121 | C.I. Double flanged Sluice Valves |
| 122 | 80 mm |
| 123 | 100 mm |
| 124 | 125 mm |
| 125 | 150 mm |
| 126 | 200 mm |
| 127 | 250 mm |
| 128 | 300 mm |
| 129 | Scour Valves |
| 130 | 80 mm dia |
| 131 | Air Valves |
| 132 | 25 mm |
| 133 | Fire Hydrants |
| 134 | 80 mm |
| 135 | Carting of following fittings of following sizes to the site of works lowering them into already prepared trenches and fixing them in position including supply of jointing materials such as bolt nut, rubber insertion white lead complete with excluding values and specials required but including the testing etc. complete excluding values and specials required but including the testing etc. complete. |
| 136 | C.I. Double flanged Sluice Valves |
| 137 | 80 mm |
| 138 | 100 mm |
| 139 | 125 mm |
| 140 | 150 mm |
| 141 | 200 mm |
| 142 | 250 mm |
| 143 | 300 mm |
| 144 | Scour Valves |
| 145 | 80 mm dia |
| 146 | Air Valves |
| 147 | 25 mm |
| 148 | Fire Hydrants |
| 149 | 80 mm |
| 150 | Supply of all materials, labour T&P Etc. required and construction of following chambers as per type design including supply and materials labour, T & P etc. complete. |
| 151 | Surface Box Type |
| 152 | Masonry Type |
| 153 | Air Valves |
| 154 | Fire Hydrants |
| 155 | Dismantling of following type of surface including sorting out and staking of serviceable materials of disposal of unserviceable materials up to a distance of 50 m. |
| 156 | B.O.E. ROAD |
| 157 | Bituminous Road |
| 158 | CC Road |
| 159 | Inter locking Road |
| 160 | Reinstatment of following type of surface including sorting outand staking of serviceable materials of disposal of unserviceable materials upto a distance of 50m. |
| 161 | BOE pavement (40%, with new bricks) |
| 162 | BOE pavement (100% with new bricks) |
| 163 | Bituminous Road |
| 164 | Interlocking Tiles (40% with new tiles) |
| 165 | Interlocking Tiles (100% with new tiles) |
| 166 | 100mm thick P.C.C.1:4:8 for subbase of interlocking tile road |
| 167 | CC Road |
| 168 | Rehabitation of colony building, devolopment of park,restacking of divisional store and construction of pathway including supply of all matterial, labour t&p etc complete.(details as per schedule G-2 attached in tender document) |
| 169 | Crossing of Culvert for laying pipe line including supply andmaterials labour, T&P etc. complete. upto 3.50M |
| 170 | 3.50M to 7.0M |
| 171 | Crossing of Road for laying pipe line including supply andmaterials labour, T&P etc. complete. |
| 172 | upto 3.0 M wide Road |
| 173 | 3.50M to 7.0M |
| 174 | Provission for crossing of drain for laying pipe line includingsupply and materials labour, T&P etc. complete. |
| 175 | Upto 1.00m |
| 176 | 1.00 to 2.00m |
| 177 | 2.00 to 3.00m |
| 178 | Provision for laying of pipeline by trenchless technology including supply of different sizes M.S. casing pipe, labour T&P etc. required for proper completion of the work. |
| 179 | 200 mm dia |
| 180 | 250 mm dia |
| 181 | 300 mm dia |
| 182 | 400 mm dia |
| 183 | Making interconnection in 90 to 500 mm dia HDPE / DI pipes including supply, carting of specials, lowering them into tranches, cutting, fixing them in proper alignment and jointing including balling out of water, necessary excavation for connection and barricading including all labour, T&P etc. required for proper completion of the |
| 184 | 300 mm to 300 mm |
| 185 | 300 mm to 90 mm |
| 186 | 250 mm to 90 mm |
| 187 | 200 mm to 90 mm |
| 188 | 160 mm to 110 mm |
| 189 | 160 mm to 90 mm |
| 190 | 140 mm to 110 mm |
| 191 | 140 mm to 90 mm |
| 192 | 110 mm to 90 mm |
| 193 | 90 mm to 90 mm |
| 194 | HOUSE CONNECTION (ZONE-I) |
| 195 | Making House Connection with distribution main includingdismantling of road, supply, carting of specials, Lowering them into trances, fixing them in proper alignment and jointing including bailing out to water, necessary excavation for connection including all labour, T&P etc. required for proper completion of the work. |
| 196 | In B.O.E. Roads |
| 197 | For 90 mm to 110 mm dia |
| 198 | For 140 mm to 160 mm dia |
| 199 | In Bituminous Roads |
| 200 | For 90 mm to 110 mm dia |
| 201 | For 140 mm to 160 mm dia |
| 202 | For 200 mm to 250 mm dia |
| 203 | For 250 mm to 300 mm dia |
| 204 | For 350 mm to 500 mm dia |
| 205 | In C. C. Roads |
| 206 | For 90 mm to 110 mm dia |
| 207 | For 140 mm to 160 mm dia |
| 208 | For 200 mm to 250 mm dia |
| 209 | For 250 mm to 300 mm dia |
| 210 | For 350 mm to 500 mm dia |
| 211 | In C. C. Interlocking tiles Roads |
| 212 | For 90 mm to 110 mm dia |
| 213 | For 140 mm to 160 mm dia |
| 214 | For 200 mm to 250 mm dia |
| 215 | For 250 mm to 300 mm dia |
| 216 | For 350 mm to 500 mm dia |
| 217 | In Earthen Roads |
| 218 | For 90 mm to 110 mm dia |
| 219 | For 140 mm to 160 mm dia |
| 220 | For 200 mm to 250 mm dia |
| 221 | For 250 mm to 300 mm dia |
| 222 | For 350 mm to 500 mm dia |
| 223 | HOUSE CONNECTION ON NEW/EXTENSION PIPE LINE (ZONE-I) |
| 224 | Making House Connection with distribution main including dismantling of road, supply, carting of specials, Lowering them into trances, fixing them in proper alignment and jointing including bailing out to water, necessary excavation for connection including all labour, T&P etc. required for proper completion of the work. |
| 225 | In B.O.E. Roads |
| 226 | For 90 mm to 110 mm dia |
| 227 | For 140 mm to 160 mm dia |
| 228 | For 200 mm to 250 mm dia |
| 229 | In Bituminous Road |
| 230 | For 90 mm to 110 mm dia |
| 231 | For 140 mm to 160 mm dia |
| 232 | For 200 mm to 250 mm dia |
| 233 | For 250 mm to 300 mm dia |
| 234 | For 350 mm to 500 mm dia |
| 235 | In C. C. Roads |
| 236 | For 90 mm to 110 mm dia |
| 237 | For 140 mm to 160 mm dia |
| 238 | For 200 mm to 250 mm dia |
| 239 | For 250 mm to 300 mm dia |
| 240 | For 350 mm to 500 mm dia |
| 241 | In C. C. Interlocking tiles Roads |
| 242 | For 90 mm to 110 mm dia |
| 243 | For 140 mm to 160 mm dia |
| 244 | For 200 mm to 250 mm dia |
| 245 | For 250 mm to 300 mm dia |
| 246 | For 350 mm to 500 mm dia |
| 247 | In Earthen Roads |
| 248 | For 90 mm to 110 mm dia |
| 249 | For 140 mm to 160 mm dia |
| 250 | For 200 mm to 250 mm dia |
| 251 | For 250 mm to 300 mm dia |
| 252 | For 350 mm to 500 mm dia |
| 253 | Repairing of old house connection from MDPE and GI pipe including all material labour and T&P proper completion of work and as per site engineer incharge. |
| 254 | 90mm to 200mm dia HDPE pipe |
| 255 | 250mm dia to 350mm dia DI pipe |
| 256 | Supply and fixing of end cap for dividing into separate zone including excavation of pit, bailing out of water, fixing the end cap and then again refilling the earth in the pit with all labour, material T&P etc complete. |
| 257 | 90mm to 200mm dia HDPE pipe |
| 258 | 250mm dia to 350mm dia DI pipe |
| 259 | Repairing of leakage |
| 260 | HDPE LINE |
| 261 | For 90mm to 110mm dia cc road CC Road |
| 262 | For 140mm to 200mm dia cc road CC Road |
| 263 | For 90mm to 110mm dia in Inter locking Road |
| 264 | For 140mm to 200mm dia Inter locking Road |
| 265 | DI LINE |
| 266 | For 300mm dia and above CC Road |
| 267 | AC LINE |
| 268 | For 200mm to 250mm dia CC Road |
| 269 | For 200mm to 250mm dia Inter locking Road |
| 270 | BOUNDARY WALL, GATE SITE DEVELOPMENT & APPROACH ROAD (ZONE-I) |
| 271 | Provide all materials; labour T&P etc. for the Boundary wall as per direction of Engineer-in- charge. |
| 272 | Provide all materials, labour T&P etc. required for proper completion of work and constructpillars as per type design and fixing of gate 3.60 m wide gate and 1.20 m wicket gate. |
| 273 | Provide all materials, labour T&P etc. required for proper completion of work and construct Interlocking approach road. |
| 274 | Construction of Drain as per type design in all materials, labour T&P etc. required for proper completion of work inside campous for proper drainage. Size (300 mm x 300 mm). |
| 275 | Provision of Lighting in campous as per direction of Engineer-in-charge including all materials, labour T&P etc complete. |
| 276 | Provision of land ecapping and aboriculture in campous as per direction of Engineer-in-charge including all materials, labour T&P etc complete. |
| 277 | Provide all materials, labour T&P etc. required for proper completion of work including leveling, dressing excavation and filling of earth where necessary for develop of water works site including carriage of earth. |
| 278 | REPAIR OF EXISTING BOUNDARY WALL (ZONE-I) |
| 279 | First class brick work in 1:4 cement and local sand mortar in superstructure and plinth including supply of all materials, labour T&P etcrequired for proper completion of work. |
| 280 | Dismantling existing plaster over damage/cracked surface includingsupply of all materials, labour T&P etc. required for proper completionof the work. |
| 281 | 12 mm thick plaster with cement and local sand mortar in proportionof 1:6 over brick work, minimum thickness not be less than 10 mmincluding supply of all materials labour, T&P etc required for propercompletion of work. |
| 282 | Provision of coping on the top of wall |
| 283 | Provision of barbed iron wire fencing to posts in four rows. |
| 284 | Provision M.S. iron angle (50x50x6mm) for the barbed wire fixing and 2 meter C/C. |
| 285 | Cement concrete with 20 mm gauge approved stone ballast coarsesand and cement in proporation 4:2:1 including supply of all materials, labour, T&P etc required for fixing M.S. Iron angle proper completion of work. |
| 286 | Raised pointing with cement mortar 1:4 consisting or cement and local sand on brick work including supply of all materials. labour, T&P etc, of the wrok. |
| 287 | White washing in three coat including supply of all materials, labour,T&P etc. complete required for proper completion of the work. |
| 288 | Providing plaster of Paris wall putty of 2mm thickness over plasteredsurface to prepare the surface even and smooth complete. |
| 289 | Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to givean uniform surface over one primer coat of white cement of approvedbrand after thoroughly brushing and rubbing the surface free frommortar droppings & other foreign matters including prepairing evensurface with plaster of paris including supply of all material labour |
| 290 | T&P etc required for proper completion of work. |
| 291 | Site clearence &other unforceen item. |
| 292 | Provide all materials, labour T&P etc. required for proper completionof work and construct pillars as per type design and fixing of gate 3.60 m wide gate and 1.20 m wicket gate. |
| 293 | Provide all materials, labour T&P etc. required for proper completion of work and construct Interlocking approach road. |
| 294 | Leveling, dressing, repairing of road in water works compound |
| 295 | ESTIMATE OF STAFF QUARTER FOR PUMP OPERATOR (ZONE-I) |
| 296 | Provide all materials, labour, T&P Complete and construction of a set of Single room Set Staff quarter for pump operator as per type design. |
| 297 | REPAIR OF ONE NO. EXISTING LOCAL CONTROL STATION |
| 298 | Ist Class brick work in 1:4 cement and local sand mortar insuperstructure including supply of all material, labour, T&P etc required for proper completion of the work. (Thickness of wall to one brick thick). |
| 299 | Dismantling existing plaster over damage/cracked surface including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 300 | Stacking/proper disposal of chiseld plaster as directed by the Engineer-in- charge. |
| 301 | 12 mm thick plaster with cement & coarse sand mortar in 1:1:5 over brick work minimum thickness not to be less than 12 mm finished with 3 mm floting coating of neat cement including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 302 | Scraping old color washing and preparing the surface by removing loos material etc. including all labour and T&P etc complete. |
| 303 | 40 mm thick over base concrete consisting of cement, local sand and 40 mm gauge first class brick ballast in the proportion of 1:4:8. For construction of apron 0.6 m wide. |
| 304 | Laying of Ceramic floor tiles on the floor including supply of all materials, labour, T&P etc. complete required for proper completion of the work. |
| 305 | White washing in three coat including supply of all materials, labour, T&P etc. complete required for proper completion of the work |
| 306 | Providing plaster of Paris wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 307 | Apex Ultima /Acrylic Exterior/ interior paint of approved brand &manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work. |
| 308 | Supply and fixing of Iron doors including supply of all materials, paints, labour T&P etc. required for proper completion of the work. |
| 309 | Supply and fixing of forciling including supply of all materials, paints, labour T&P etc. required for proper completion of the work. |
| 310 | Repair for electric fitting |
| 311 | Site clearence and other unforseen items. |
| 312 | ZONE-2 |
| 313 | Pump House |
| 314 | Provide all materials, labour, T&P complete Pump House size (3.60 x 3.00 x 3.00 m) cum chlornating room (2.25 x2.25 x 3.00 m) as per type design. |
| 315 | REPAIRING OF TWO NOS. EXISTING PUMP HOUSE (ZONE-II) |
| 316 | I class brick work in 1 : 4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 317 | Dismantling existing plaster over damage/cracked surface includingsupply of all materials, labour T&P etc. required for proper completion of the work. |
| 318 | Stacking/proper disposal of chiseld plaster as directed by the Engineer- in-charge. |
| 319 | Racking of joints in wall in exposed surface to poperly prepare surface for new plaster work including supply of all materials, labour T&P etc.required for proper completion of the work. |
| 320 | 12 mm thick plaster with cement & coarse sand mortar in 1:1:6 over brick work minimum thickness not to be less than 12 mm finished with 3 mm floting coating of neat cement including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 321 | Repair for electric fitting |
| 322 | Reparing of floor in P.C.C. 1:2:4 |
| 323 | First class brick work in 1:4 cement and local sand mortar in superstructure including supply of all materials labour T&P etc required forproper completion of For construction of apron 0.6 m wide workstructure including supply of all materials labour T&P etc required forproper completion of For construction of apron 0.6 m wide work. |
| 324 | Same as item no. 3 above but 25 mm thick PCC floor laid over baseconcrete consisting of cement, local sand and 40mm gauge first class brick ballast in the proportion of 1:4:8. For construction of apron 0.6m wide. |
| 325 | Supply and fixing of flush door including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 326 | Supply and fix angle iron door chaukhat of size 50mm x 50mm x 6 mm including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 327 | 1. Door frame (2 Nos.) |
| 328 | 2. Window frame (4 Nos.) |
| 329 | Supply and fixing of 1mm thick sheet iron panelled door/ windowshutters including supply and fixing and adjustment of Cleats, stops,hings, locks, bolts, handles. Spring and other fittings.( Excluding suplly of fittings). |
| 330 | Supply of oxidized iron fittings of approved make for doors and window. |
| 331 | 11.5 cm string or drip-coarse in 1:6 cement and local sand mortor. |
| 332 | Painting or varnishing new iron work in small areas or new wood work with one priming coat and two coats of approved paints or varnish including supply of all materials labour, T&P etc required for proper completion of work. |
| 333 | White cement in three coats including supply of all materials labour,T&P etc required for proper completion of work. |
| 334 | Providing plaster of Paris wall putty of 2 mm thickness over plastered |
| 335 | surface to prepare the surface even and smooth complete. |
| 336 | Apex Ultima /Acrylic Exterior/ interior paint of approved brand &manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work. |
| 337 | Supply and fixing 3mm thick plain glass in windows including supplyof all materialslabour,T&P etc required for proper completion of ork. |
| 338 | Supply and fixing of 100 mm dia CI pipe rain water down pipe withclamp etc. |
| 339 | RISING MAIN AND BYE PASS ARRANGEMENT (ZONE-II) |
| 340 | Supply of the following pipes including railway freight, insurancecharges F.O.R. etc. complete.200 mm dia D.I. Class K-9 From.Tube wells to OHT including bye pass |
| 341 | Supply of D.I. specials for the above pipe lines |
| 342 | Carting, laying and jointing of the following sizes of pipes into thetrenches including cost of all jointing materials, labour and T&P,testing etc. complete.From Tube wells to OHT including bye pass |
| 343 | Earth work in ordinary soil with lift upto 1.50 m and lead upto 50 m,filling, watering and ramming of excavated earth into the trenchesand disposal of surplus earth upto 50 m. |
| 344 | Supply of following sizes of C.I. D/F sluice valves as per I.S. 780-1960 tested to 10 Kg/sqm fixing in pipe line trenches, jointing and testing complete. 200 mm dia |
| 345 | Carting of D/F sluice valves of following sizes to the site of workslowering them into already prepared trenches and fixing them inposition including supply of jointing materials such as bolt nut,rubber insertion white lead complete with excluding values and specialsrequired but including the testing etc. complete excluding values and specials required but including the testing etc. complete.200 mm dia |
| 346 | Supply of all materials, labour, T&P and construction of followingchambers as per type design including supply and materials, labourand T&P, testing etc. complete. Masonry Type |
| 347 | Supply of all materials, labour, and T & P etc. and construct R.C.C.thrust blocks. |
| 348 | R.C.C. work in 1:1.5:3. |
| 349 | Mild steel work |
| 350 | Dismantling and reinstatement of following type of road surfacesfor lying of pipe line including sorting out of serviceable materialsand disposal of unserviceable materials. |
| 351 | C.C. Road |
| 352 | Civil work for Rebore Tube well (as per Unit Estimate) |
| 353 | Housing Chamber of Tubewell of standard Size with Cover |
| 354 | REPAIRING OF ONE NO. EXISTING OVERHEAD TANK (2500 Kl/20M) (ZONE-II) |
| 355 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after.The scaffolding system shall be stiffened with bracings, runners, connectionwith the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.(As Per DSR) |
| 356 | Providing and applying one coat of slurry of hydrophilic in nature forwaterproofing treatment of internal surface of the Over Head Tank. (Rate From Delhi Schedule of rates.) |
| 357 | Supply and fixing of scaffolding in internal dome required for the proper completion of above work. |
| 358 | Supply of all material labour T&P vertical pipe including fixing of all D.I pipe after dismantling. |
| 359 | Supply fixing and carting, jointing of D.I. D/F vertical pipes for inlet of new tubewell to OHT including centering, shuttering, Cutting of hole in bottom, Erection of pipe for parellel to column of OHT with supply of all materials aspacking jointing required column and nut bolts etc upto required hight insideof tank as per direction of engnieer with all materials labours T&P etc forproper completion of work. |
| 360 | Painting, Colour washing of OHT, ladder, with approved quality paint.(Asian Apex Paint) |
| 361 | Reparing and fixing of G.I. Railing hand post, stair case |
| 362 | Supply of sluice valves with all material, labour T&P etc complete |
| 363 | 200 mm to above dia |
| 364 | Earth filling in flooring of tank . |
| 365 | DISTRIBUTION SYSTEM (ZONE-II) |
| 366 | Excavation for pipe line trenches in Ordinary soil,(lime, clay or sand Including lift up to 1.5m and lead up To 50m and refilling, watering, Ramming of excavated earth in to trenches and disposal of surplus earth up to 50 m from the center of the foundation trenches. |
| 367 | Supply of the following sizes of pipes confirming to I.S. 4984:1995, I.S.-8329/2000 latest relevant of I.S.S. with couplers etc complete in all respect F.O.R. destination including all taxes and insurance. |
| 368 | HDPE Pipe PN-6 (O. D.) PE-100 |
| 369 | 90 mm dia |
| 370 | 110 mm dia |
| 371 | 140 mm dia |
| 372 | 160 mm dia |
| 373 | DI Pipe K-7 |
| 374 | 200 mm dia |
| 375 | 250 mm dia |
| 376 | 300 mm dia |
| 377 | 350 mm dia |
| 378 | 450 mm dia |
| 379 | Supply of Specials for above pipe F.O.R destination includingall Taxes and insurance. |
| 380 | HDPE Pipe PN-6 (O. D.) PE-100 |
| 381 | DI Pipe K-7 |
| 382 | Carting from the store (up to 8 Km.) The following sizes ofpipe and specials to the site of work lowering them in to trenches and laying true to alignment and gradient includingjointing of pipe with electrofusion sockets, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. complate but excluding cost of trenching and cutting of pipes etc. For making of lengths but including making joints. |
| 383 | HDPE Pipe PN-6 (O. D.) PE-100 |
| 384 | 90 mm dia |
| 385 | 110 mm dia |
| 386 | 140 mm dia |
| 387 | 160 mm dia |
| 388 | DI Pipe K-7 |
| 389 | 200 mm dia |
| 390 | 250 mm dia |
| 391 | 300 mm dia |
| 392 | 350 mm dia |
| 393 | 450 mm dia |
| 394 | Supply of following types of fittings including railways freight, cartage up to store, all taxes and duties complete. |
| 395 | C.I. Double flanged Sluice /Scour Valves as per I.S. 780/1969class-1 working pressure 10 Kg/sqm F.O.R Destinationincluding all taxes and insurance. |
| 396 | C.I. Double flanged Sluice Valves |
| 397 | 80 mm |
| 398 | 125 mm |
| 399 | 150 mm |
| 400 | 200 mm |
| 401 | 300 mm |
| 402 | 350 mm |
| 403 | Scour Valves |
| 404 | 80 mm dia |
| 405 | Air Valves |
| 406 | 25 mm |
| 407 | Fire Hydrants |
| 408 | 80 mm |
| 409 | Carting of following fittings of following sizes to the site of works lowering them into already prepared trenches and fixing them in position including supply of jointing materials such as bolt nut, rubber insertion white lead complete with excluding values and specials required but including the testing etc. complete excluding values and specials required but including the testing etc. complete. |
| 410 | C.I. Double flanged Sluice Valves |
| 411 | 80 mm |
| 412 | 125 mm |
| 413 | 150 mm |
| 414 | 200 mm |
| 415 | 300 mm |
| 416 | 350 mm |
| 417 | Scour Valves |
| 418 | 80 mm dia |
| 419 | Air Valves |
| 420 | 25 mm |
| 421 | Fire Hydrants |
| 422 | 80 mm |
| 423 | Supply of all materials, labour T&P Etc. required and construction of following chambers as per type design including supply and materials labour, T&P etc. complete. |
| 424 | Surface Box Type |
| 425 | Masonry Type |
| 426 | Air Valves |
| 427 | Fire Hydrants |
| 428 | Dismantling of following type of surface including sorting out and staking of serviceable materials of disposal of unserviceable materials up to a distance of 50 m. |
| 429 | B.O.E. ROAD |
| 430 | Bituminous Road |
| 431 | CC Road |
| 432 | Inter locking Road |
| 433 | Reinstatment of following type of surface including sorting out and staking of serviceable materials of disposal of unserviceable materials up to a distance of 50m. |
| 434 | BOE pavement (40%, with new bricks) |
| 435 | BOE pavement (100% with new bricks) |
| 436 | Bituminous Road |
| 437 | CC Road |
| 438 | Interlocking Tiles (40% with new tiles) |
| 439 | Interlocking Tiles (100% with new tiles) |
| 440 | 100mm thick P.C.C.1:4:8 for subbase of interlocking tile road |
| 441 | Crossing of Culvert for laying pipe line including supply and materials labour, T&P etc. complete. |
| 442 | upto 3.50M |
| 443 | 3.50M to 7.0M |
| 444 | Crossing of Road for laying pipe line including supply and materials labour, T&P etc. complete. |
| 445 | upto 3.0 M wide Road |
| 446 | 3.50M to 7.0M |
| 447 | Provission for crossing of drain for laying pipe line including supply and materials labour, T&P etc. complete. |
| 448 | Upto 1.00m |
| 449 | 1.00 to 2.00m |
| 450 | 2.00 to 3.00m |
| 451 | Provision for laying of pipeline by trenchless technology including supply of different sizes M.S. casing pipe, labour T&P etc. required for proper completion of the work. |
| 452 | 200 mm dia |
| 453 | 250 mm dia |
| 454 | 300 mm dia |
| 455 | 350 mm dia |
| 456 | Making interconnection in 90 to 500 mm dia AC/ P.V.C./HDPE / DI pipes including supply, carting of specials, lowering them into tranches, cutting, fixing them in proper alignment and jointing including balling out of water, necessary excavation for connection and barricading including all labour, T&P etc. required for proper completion of the work. |
| 457 | 250 mm to 90 mm |
| 458 | 200 mm to 200 mm |
| 459 | 200 mm to 90 mm |
| 460 | 140 mm to 110 mm |
| 461 | 140 mm to 90 mm |
| 462 | 110 mm to 110 mm |
| 463 | 110 mm to 90 mm |
| 464 | 90 mm to 90 mm |
| 465 | HOUSE CONNECTION ON EXISTING PIPE LINE |
| 466 | Making House Connection with distribution main including dismantling of road, supply, carting of specials, Lowering them into trances, fixing them in proper alignment and jointing including bailing out to water, necessary excavation for connection including all labour, T&P etc. required for proper completion of the work. |
| 467 | In Bituminous Roads |
| 468 | For 90 mm to 110 mm dia |
| 469 | For 140 mm to 160 mm dia |
| 470 | For 200 mm to 250 mm dia |
| 471 | For 250 mm to 300 mm dia |
| 472 | In C. C. Roads |
| 473 | For 90 mm to 110 mm dia |
| 474 | For 140 mm to 160 mm dia |
| 475 | For 200 mm to 250 mm dia |
| 476 | For 250 mm to 300 mm dia |
| 477 | In C. C. Interlocking tiles Roads |
| 478 | For 90 mm to 110 mm dia |
| 479 | For 140 mm to 160 mm dia |
| 480 | For 200 mm to 250 mm dia |
| 481 | For 250 mm to 300 mm dia |
| 482 | In Earthen Roads |
| 483 | For 90 mm to 110 mm dia |
| 484 | For 140 mm to 160 mm dia |
| 485 | For 200 mm to 250 mm dia |
| 486 | For 250 mm to 300 mm dia |
| 487 | HOUSE CONNECTION ON NEW/EXTENSION PIPE LINE (ZONE-II) |
| 488 | Making House Connection with distribution main including dismantling of road, supply, carting of specials, Lowering them into trances, fixing theminproper alignment and jointing including bailing out to water, necessary excavation for connection including all labour, T&P etc. required for proper completion of the work. |
| 489 | In B.O.E. Roads |
| 490 | For 90 mm to 110 mm dia |
| 491 | In Bituminous Road |
| 492 | For 90 mm to 110 mm dia |
| 493 | For 140 mm to 160 mm dia |
| 494 | For 200 mm to 250 mm dia |
| 495 | For 250 mm to 300 mm dia |
| 496 | In C. C. Roads |
| 497 | For 90 mm to 110 mm dia |
| 498 | For 140 mm to 160 mm dia |
| 499 | For 200 mm to 250 mm dia |
| 500 | For 250 mm to 300 mm dia |
| 501 | For 350 mm to 500 mm dia |
| 502 | In C. C. Interlocking tiles Roads |
| 503 | For 90 mm to 110 mm dia |
| 504 | For 140 mm to 160 mm dia |
| 505 | For 200 mm to 250 mm dia |
| 506 | For 250 mm to 300 mm dia |
| 507 | In Earthen Roads |
| 508 | For 90 mm to 110 mm dia |
| 509 | For 140 mm to 160 mm dia |
| 510 | For 200 mm to 250 mm dia |
| 511 | For 250 mm to 300 mm dia |
| 512 | Repairing of old house connection from MDPE and GI pipeincluding all material labour and T&P proper completion of work and as per site engineer incharge. |
| 513 | 90mm to 200mm dia HDPE pipe |
| 514 | 250mm dia to 350mm dia DI pipe |
| 515 | Supply and fixing of end cap for dividing into separate zoneincluding excavation of pit, bailing out of water, fixing the end cap and then again refilling the earth in the pit with all labour, material T&P etc complete. |
| 516 | 90mm to 200mm dia HDPE pipe |
| 517 | 250mm dia to 350mm dia DI pipe |
| 518 | Estimate For Repairing of Leakages |
| 519 | HDPE LINE |
| 520 | For 90mm to 110mm dia |
| 521 | For 140mm to 200mm dia |
| 522 | For 90mm to 110mm dia |
| 523 | For 140mm to 200mm dia |
| 524 | For 90mm to 110mm dia |
| 525 | For 140mm to 200mm dia |
| 526 | AC LINE |
| 527 | For 200mm to 250mm dia |
| 528 | For 200mm to 250mm dia |
| 529 | BOUNDARY WALL, GATE SITE DEVELOPMENT & APPROACH ROAD (ZONE-II) |
| 530 | Provide all materials;labour T&P etc. for the direction of Engineer-in-Boundary wall as per charge. |
| 531 | Provide all materials, labour T&P etc. required for proper completion of work and construct pillars as per type design and fixing of gate 3.60 m wide gate and 1.20 m wicket gate. |
| 532 | Provide all materials, labour T&P etc. required for proper completion of work and construct Interlocking approach road. |
| 533 | Construction of Drain as per type design in all materials, labour T&P etc. required for proper completion of work inside campous for proper drainage. Size (300 mm x 300 mm). |
| 534 | Provision of Lighting in campous as per direction of Engineer-in-charge including all materials , labour T&P etc complete. |
| 535 | Provision of land ecapping and aboriculture in campous as per direction of Engineer-in-charge including all materials , labour T&P etc complete. |
| 536 | Provide all materials, labour T&P etc. required for proper completion of work including leveling, dressing excavation and filling of earth where necessary for develop of water works site including carriage of earth. |
| 537 | REPAIR OF EXISTING BOUNDARY WALL (ZONE-II) |
| 538 | First class brick work in 1:4 cement and local sand mortar in superstructure and plinth including supply of all materials, labour T&P etcrequired for proper completion of work. |
| 539 | Dismantling existing plaster over damage/cracked surface includingsupply of all materials, labour T&P etc. required for proper completionof the work. |
| 540 | 12 mm thick plaster with cement and local sand mortar in proportionof 1:6 over brick work, minimum thickness not be less than 10 mmincluding supply of all materials labour, T&P etc required for propercompletion of work. |
| 541 | Provision of coping on the top of wall |
| 542 | Provision of barbed iron wire fencing to posts in four rows. |
| 543 | Provision M.S. iron angle (50x50x6mm) for the barbed wire fixing and 2 meter C/C. |
| 544 | Cement concrete with 20 mm gauge approved stone ballast coarsesand and cement in proporation 4:2:1 including supply of allmaterials, labour, T&P etc required for fixing M.S. Iron angle propercompletion of work. |
| 545 | Raised pointing with cement mortar 1:4 consisting or cement andlocal sand on brick work including supply of all materials. labour,T&P etc, of the wrok. |
| 546 | White washing in three coat including supply of all materials, labour,T&P etc. complete required for proper completion of the work. |
| 547 | Providing plaster of Paris wall putty of 2mm thickness over plasteredsurface to prepare the surface even and smooth complete. |
| 548 | Apex Ultima /Acrylic Exterior/ interior paint of approved brand &manufacturer & of required shade on under coated wall surface to givean uniform surface over one primer coat of white cement of approvedbrand after thoroughly brushing and rubbing the surface free frommortar droppings & other foreign matters including prepairing evensurface with plaster of paris including supply of all material labour |
| 549 | T&P etc required for proper completion of work. |
| 550 | Site clearence &other unforceen item. |
| 551 | Provide all materials, labour T&P etc. required for proper completion of work and construct pillars as per type design and fixing of gate 3.60 m wide gate and 1.2 m wicket gate. |
| 552 | Provide all materials, labour T&P etc. required for proper completionof work and construct Interlocking approach road. |
| 553 | Leveling, dressing, repairing of road in water works compound |
| 554 | REPAIR OF ONE NO. EXISTING STAFF QUARTER (ZONE-II) |
| 555 | Ist Class brick work in 1:4 cement and local sand mortar in superstructure including supply of all material, labour, T&P etc required for proper completion of the work. (Thickness of wall to one brick thick). |
| 556 | Dismantling existing plaster over damage/cracked surface including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 557 | Stacking/proper disposal of chiseld plaster as directed by the Engineer-in- charge. |
| 558 | 12 mm thick plaster with cement & coarse sand mortar in 1:1:5 over brick work minimum thickness not to be less than 12 mm finished with 3 mm floting coating of neat cement including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 559 | Scraping old color washing and preparing the surface by removing loos material etc. including all labour and T&P etc complete. |
| 560 | 40 mm thick over base concrete consisting of cement, local sand and 40 mm gauge first class brick ballast in the proportion of 1:4:8. For construction of apron 0.6 m wide. |
| 561 | Laying of Ceramic floor tiles on the floor including supply of all materials, labour, T&P etc. complete required for proper completion of the work. |
| 562 | White washing in three coat including supply of all materials, labour, T&P etc. complete required for proper completion of the work |
| 563 | Providing plaster of Paris wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 564 | Apex Ultima /Acrylic Exterior/ interior paint of approved brand &manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work. |
| 565 | Supply and fixing of Iron doors including supply of all materials, paints, labour T&P etc. required for proper completion of the work. |
| 566 | Repair for electric fitting |
| 567 | Repair for sanitation work |
| 568 | Site clearence and other unforseen items. |
| 569 | ZONE-3 |
| 570 | SIZE (3.60 X 3.00 X 3.00 M) CUM CHLORNATING ROOM (2.25 x 2.25 x 3.00 M) |
| 571 | Provide all materials, labour, T&P complete Pump Housesize (3.60 x 3.00 x 3.00 m) cum chlornating room (2.25 x 2.25 x 3.00 m) as per type design. |
| 572 | REPAIRING OF TWO NOS. EXISTING PUMP HOUSE (ZONE-III) |
| 573 | I class brick work in 1 : 4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 574 | Dismantling existing plaster over damage/cracked surface including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 575 | Stacking/proper disposal of chiseld plaster as directed by the Engineer-in-charge. |
| 576 | Racking of joints in wall in exposed surface to poperly prepare surface for new plaster work including supply of all materials, labour T&P etc. |
| 577 | 12 mm thick plaster with cement & coarse sand mortar in 1:1:6 over brick work minimum thickness not to be less than 12 mm finished with 3 mm floting coating of neat cement including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 578 | Repair for electric fitting |
| 579 | Reparing of floor in P.C.C. 1:2:4 |
| 580 | First class brick work in 1:4 cement and local sand mortar in super structure including supply of all materials labour T&P etc required for proper completion of For construction of apron 0.6 m wide work. structure including supply of all materials labour T&P etc required for proper completion of For construction of apron 0.6 m wide work. |
| 581 | Same as item no. 3 above but 25 mm thick PCC floor laid over base concrete consisting of cement, local sand and 40mm gauge first class brick ballast in the proportion of 1:4:8. For construction of apron 0.6m wide. |
| 582 | Supply and fixing of flush door including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 583 | Supply and fix angle iron door chaukhat of size 50mm x 50mm x 6 mm including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 584 | 1. Door frame (2 Nos.) |
| 585 | 2. Window frame (4 Nos.) |
| 586 | Supply and fixing of 1mm thick sheet iron panelled door/ windowshutters including supply and fixing and adjustment of Cleats, stops, hings, locks, bolts, handles. Spring and other fittings.( Excluding suplly of fittings). |
| 587 | Supply of oxidized iron fittings of approved make for doors and window. |
| 588 | 11.5 cm string or drip-coarse in 1:6 cement and local sand mortor. |
| 589 | Painting or varnishing new iron work in small areas or new wood work with one priming coat and two coats of approved paints or varnish including supply of all materials labour, T&P etc required for proper completion of work. |
| 590 | White cement in three coats including supply of all materialslabour, T&P etc required for proper completion of work. |
| 591 | Providing plaster of Paris wall putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 592 | Apex Ultima /Acrylic Exterior/ interior paint of approved brand &manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work. |
| 593 | Supply and fixing 3 mm thick plain glass in windows including supplyof all materials labour, T&P etc required for proper completion of work. |
| 594 | Supply and fixing of 100 mm dia CI pipe rain water down pipe withclamp etc. |
| 595 | Site clearence and other unforseen items. |
| 596 | RISING MAIN AND BYE PASS ARRANGEMENT (ZONE-III) |
| 597 | Supply of the following pipes including railway freight, insurance charges F.O.R. etc. complete. 200 mm dia D.I. Class K-9 From Tube wells to OHT including bye pass |
| 598 | Supply of D.I. specials for the above pipe lines of pipes into thelabour and T&P,the following sizes jointing materials, |
| 599 | Carting, laying and jointing of trenches including cost of all testing etc. complete. |
| 600 | From Tube wells to OHT including bye pass |
| 601 | Earth work in ordinary soil with lift upto 1.50 m and lead upto 50 m, filling, watering and ramming of excavated earth into the trenches and disposal of surplus earth upto 50 m. |
| 602 | Supply of following sizes of C.I. D/F sluice valves as per I.S. 780-1960 tested to 10 Kg/sqm fixing in pipe line trenches, jointing and testing complete. 200 mm dia |
| 603 | Carting of D/F sluice valves of following sizes to the site of works lowering them into already prepared trenches and fixing them in position including supply of jointing materials such as bolt nut, rubberinsertion white lead complete with excluding values and specials required but including the testing etc. complete excluding values and specials required but including the testing etc. complete. |
| 604 | 200 mm dia |
| 605 | Supply of all materials, labour, T&P and construction of following chambers as per type design including supply and materials, labour and T&P, testing etc. complete. |
| 606 | Masonry Type |
| 607 | Supply of all materials, labour, and T & P etc. and construct R.C.C.thrust blocks. |
| 608 | R.C.C. work in 1:1.5:3. |
| 609 | 200 mm dia |
| 610 | Mild steel work |
| 611 | 200 mm dia |
| 612 | Dismantling and reinstatement of following type of road surfaces for lying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials. |
| 613 | C.C. Road |
| 614 | Civil work for Rebore Tube well (as per Unit Estimate) |
| 615 | Laying of Flat submersible Cable of 10 sq. mm. (approx 100 mtr X 2 mtr) from Rebore T/w to existing pump house with material and labour including PVC pipe . |
| 616 | Housing Chamber of Tubewell of standard Size with Cover |
| 617 | REPAIRING OF ONE NO. EXISTING OVERHEAD TANK (2250 Kl/20M) (ZONE-III) |
| 618 | Providing and fixing double scaffolding system (cup lock type) on the exteriorside, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after.The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.(As Per DSR) |
| 619 | Providing and applying one coat of slurry of hydrophilic in nature for waterproofing treatment of internal surface of the Over Head Tank. (Rate From Delhi Schedule of rates.) |
| 620 | Supply and fixing of scaffolding in internal dome required for the proper completion of above work. |
| 621 | Supply of all material labour T&P vertical pipe including fixing of all D.I pipe after dismantling. |
| 622 | Supply fixing and carting, jointing of D.I. D/F vertical pipes for inlet of new tubewell to OHT including centering, shuttering, Cutting of hole in bottom, Erection of pipe for parellel to column of OHT with supply of all materials as packing jointing required column and nut bolts etc upto required hight inside of tank as per direction of engnieer with all materials labours T&P etc for proper completion of work. |
| 623 | Painting, Colour washing of OHT, ladder, with approved quality paint.(Asian Apex Paint) |
| 624 | Reparing and fixing of G.I. Railing hand post, stair case |
| 625 | Supply of sluice valves with all material, labour T&P etc complete |
| 626 | 200 mm dia |
| 627 | Earth filling in flooring of tank . |
| 628 | Site clearence and other unforseen items. |
| 629 | ESTIMATE OF DISTRIBUTION SYSTEM (ZONE-III) |
| 630 | Excavation for pipe line trenches in Ordinary soil,(lime, clay or sand Including lift up to 1.5m and lead up To 50m and refilling, watering, Ramming of excavated earth in to trenches and disposal of surplus earth up to 50 m from the center of the foundation trenches. |
| 631 | Supply of the following sizes of pipes confirming to I.S. 4984:1995, I.S.-8329/2000 latest relevant of I.S.S. with couplers etc complete in all respect F.O.R. destination including all taxes and insurance. |
| 632 | HDPE Pipe PN-6 (O. D.) PE-100 |
| 633 | 90 mm dia |
| 634 | 110 mm dia |
| 635 | 140 mm dia |
| 636 | 160 mm dia |
| 637 | DI Pipe K-7 |
| 638 | 200 mm dia |
| 639 | 250 mm dia |
| 640 | 300 mm dia |
| 641 | 350 mm dia |
| 642 | 400 mm dia |
| 643 | 450 mm dia |
| 644 | Supply of Specials for above pipe F.O.R destination including all Taxes and insurance. |
| 645 | HDPE Pipe PN-6 (O. D.) PE-100 |
| 646 | DI Pipe K-7 |
| 647 | Carting from the store (up to 8 Km.) The following sizes ofpipe and specials to the site of work lowering them in to trenches and laying true to alignment and gradient including jointing of pipe with electrofusion sockets, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. complate but excluding cost of trenching and cutting of pipes etc. For making of lengths but including making joints. |
| 648 | HDPE Pipe PN-6 (O. D.) PE-100 |
| 649 | 90 mm dia |
| 650 | 110 mm dia |
| 651 | 140 mm dia |
| 652 | 160 mm dia |
| 653 | DI Pipe K-7 |
| 654 | 200 mm dia |
| 655 | 250 mm dia |
| 656 | 300 mm dia |
| 657 | 350 mm dia |
| 658 | 400 mm dia |
| 659 | 450 mm dia |
| 660 | Supply of following types of fittings including railways freight, cartage up to store, all taxes and duties complete. |
| 661 | C.I. Double flanged Sluice /Scour Valves as per I.S. 780/1969 class-1 working pressure 10 Kg/sqm F.O.R Destination including all taxes and insurance. |
| 662 | C.I. Double flanged Sluice Valves |
| 663 | 80 mm |
| 664 | 100 mm |
| 665 | 125 mm |
| 666 | 150 mm |
| 667 | 200 mm |
| 668 | 250 mm |
| 669 | 300 mm |
| 670 | 350 mm |
| 671 | Scour Valves |
| 672 | 80 mm dia |
| 673 | Air Valves |
| 674 | 25 mm |
| 675 | Fire Hydrants |
| 676 | 80 mm |
| 677 | Carting of following fittings of following sizes to the site of works lowering them into already prepared trenches and fixing them in position including supply of jointing materials such as bolt nut, rubber insertion white lead complete with excluding values and specials required but including the testing etc. complete excluding values and specials required but including the testing etc. complete. |
| 678 | C.I. Double flanged Sluice Valves |
| 679 | 80 mm |
| 680 | 100 mm |
| 681 | 125 mm |
| 682 | 150 mm |
| 683 | 200 mm |
| 684 | 250 mm |
| 685 | 300 mm |
| 686 | 350 mm |
| 687 | Scour Valves |
| 688 | 80 mm dia |
| 689 | Air Valves |
| 690 | 25 mm |
| 691 | 80 mm |
| 692 | Supply of all materials, labour T&P Etc. required and construction of following chambers as per type design including supply and materials labour, T & P etc. complete. construction of following chambers as per type design including supply and materials labour, T & P etc. complete. |
| 693 | Surface Box Type |
| 694 | Masonry Type |
| 695 | Air Valves |
| 696 | Fire Hydrants |
| 697 | Dismantling of following type of surface including sorting out and staking of serviceable materials of disposal of unserviceable materials up to a distance of 50 m. |
| 698 | B.O.E. ROAD |
| 699 | Bituminous Road |
| 700 | CC Road |
| 701 | Inter locking Road |
| 702 | Permanent reinstatment of following type of surface including sorting out and staking of serviceable materials of disposal of unserviceable materials up to a distance of 50m. |
| 703 | BOE pavement (40%, with new bricks) |
| 704 | BOE pavement (100% with new bricks) |
| 705 | Bituminous Road |
| 706 | CC Road |
| 707 | Interlocking Tiles (40% with new tiles) |
| 708 | Interlocking Tiles (100% with new tiles) |
| 709 | 100mm thick P.C.C.1:4:8 for subbase of interlocking tile road |
| 710 | Crossing of Culvert for laying pipe line including supply andmaterials labour, T&P etc. complete. |
| 711 | upto 3.50M |
| 712 | 3.50M to 7.0M |
| 713 | Crossing of Road for laying pipe line including supply andmaterials labour, T&P etc. complete. |
| 714 | upto 3.0 M wide Road |
| 715 | 3.50M to 7.0M |
| 716 | Provission for crossing of drain for laying pipe line includingsupply and materials labour, T&P etc. complete. |
| 717 | Upto 1.00m |
| 718 | 1.00 to 2.00m |
| 719 | 2.00 to 3.00m |
| 720 | Provision for laying of pipeline by trenchless technology including supply of different sizes M.S. casing pipe, labour T&P etc. required for proper completion of the work. |
| 721 | 200 mm dia |
| 722 | 250 mm dia |
| 723 | 300 mm dia |
| 724 | 400 mm dia |
| 725 | Making interconnection in 90 to 500 mm dia AC/PVC/ HDPE / DI pipes including supply, carting of specials, lowering them into tranches, cutting, fixing them in proper alignment and jointing including balling out of water, necessary excavation for connection and barricading including all labour, T&P etc. required for proper completion of the work. |
| 726 | 300 mm to 90 mm |
| 727 | 250 mm to 90 mm |
| 728 | 200 mm to 200 mm |
| 729 | 200 mm to 160 mm |
| 730 | 200 mm to 90 mm |
| 731 | 160 mm to 140 mm |
| 732 | 160 mm to 90 mm |
| 733 | 140 mm to 140 mm |
| 734 | 140 mm to 90 mm |
| 735 | 110 mm to 90 mm |
| 736 | 90 mm to 90 mm |
| 737 | HOUSE CONNECTION ON EXISTING PIPE LINE |
| 738 | Making House Connection with distribution main including dismantling of road, supply, carting of specials, Lowering them into trances, fixing them in proper alignment and jointing including bailing out to water, necessary excavation for connection including all labour, T&P etc. required for proper completion of the work. |
| 739 | In B.O.E. Roads |
| 740 | For 90 mm to 110 mm dia |
| 741 | In Bituminous Roads |
| 742 | For 90 mm to 110 mm dia |
| 743 | For 140 mm to 160 mm dia |
| 744 | For 200 mm to 250 mm dia |
| 745 | For 250 mm to 300 mm dia |
| 746 | For 350 mm to 500 mm dia |
| 747 | In C. C. Roads |
| 748 | For 90 mm to 110 mm dia |
| 749 | For 140 mm to 160 mm dia |
| 750 | For 200 mm to 250 mm dia |
| 751 | For 250 mm to 300 mm dia |
| 752 | For 350 mm to 500 mm dia |
| 753 | In C. C. Interlocking tiles Roads |
| 754 | For 90 mm to 110 mm dia |
| 755 | For 140 mm to 160 mm dia |
| 756 | For 200 mm to 250 mm dia |
| 757 | For 250 mm to 300 mm dia |
| 758 | For 350 mm to 500 mm dia |
| 759 | In Earthen Roads |
| 760 | For 90 mm to 110 mm dia |
| 761 | For 140 mm to 160 mm dia |
| 762 | For 200 mm to 250 mm dia |
| 763 | For 250 mm to 300 mm dia |
| 764 | For 350 mm to 500 mm dia |
| 765 | HOUSE CONNECTION ON NEW/EXTENSION PIPE LINE (ZONE-III) |
| 766 | Making House Connection with distribution main includingdismantling of road, supply, carting of specials, Lowering them into trances, fixing them in proper alignment and jointing including bailing out to water, necessary excavation for connection including all labour, T&P etc. required for proper completion of the work. |
| 767 | In B.O.E. Roads |
| 768 | For 90 mm to 110 mm dia |
| 769 | For 140 mm to 160 mm dia |
| 770 | For 200 mm to 250 mm dia |
| 771 | For 250 mm to 300 mm dia |
| 772 | In Bituminous Road |
| 773 | For 90 mm to 110 mm dia |
| 774 | For 140 mm to 160 mm dia |
| 775 | For 200 mm to 250 mm dia |
| 776 | For 250 mm to 300 mm dia |
| 777 | For 350 mm to 500 mm dia |
| 778 | In C. C. Roads |
| 779 | For 90 mm to 110 mm dia |
| 780 | For 140 mm to 160 mm dia |
| 781 | For 200 mm to 250 mm dia |
| 782 | For 250 mm to 300 mm dia |
| 783 | For 350 mm to 500 mm dia |
| 784 | In C. C. Interlocking tiles Roads |
| 785 | For 90 mm to 110 mm dia |
| 786 | For 140 mm to 160 mm dia |
| 787 | For 200 mm to 250 mm dia |
| 788 | For 250 mm to 300 mm dia |
| 789 | For 350 mm to 500 mm dia |
| 790 | In Earthen Roads |
| 791 | For 90 mm to 110 mm dia |
| 792 | For 140 mm to 160 mm dia |
| 793 | For 200 mm to 250 mm dia |
| 794 | For 250 mm to 300 mm dia |
| 795 | For 350 mm to 500 mm dia |
| 796 | Repairing of old house connection from MDPE and GI pipeincluding all material labour and T&P proper completion of work and as per site engineer incharge. |
| 797 | 90mm to 200mm dia HDPE pipe |
| 798 | 250mm dia to 350mm dia DI pipe |
| 799 | Supply and fixing of end cap for dividing into separate zone including excavation of pit, bailing out of water, fixing the end cap and then again refilling the earth in the pit with all labour, material T&P etc complete. |
| 800 | 90mm to 200mm dia HDPE pipe |
| 801 | 250mm dia to 350mm dia DI pipe |
| 802 | Repairing of Leakages |
| 803 | HDPE LINE |
| 804 | For 90mm to 110mm dia Bituminous Road |
| 805 | For 90mm to 110mm dia CC Road |
| 806 | For 140mm to 200mm dia CC Road |
| 807 | For 90mm to 110mm dia Inter locking Road |
| 808 | For 140mm to 200mm dia Inter locking Road |
| 809 | BOUNDARY WALL, GATE SITE DEVELOPMENT & APPROACH ROAD (ZONE-III) |
| 810 | Provide all materials; labour T&P etc. for the Boundary wall as per direction of Engineer-in- charge. |
| 811 | Provide all materials, labour T&P etc. required for proper completion of work and construct pillars as per type design and fixing of gate 3.6 m wide gate and 1.2 m wicket gate. |
| 812 | Provide all materials, labour T&P etc. required for proper completion of work and construct Interlocking approach road. |
| 813 | Construction of Drain as per type design in all materials, labour T&P etc. required for proper completion of work inside campous for proper drainage. Size (300 mm x 300 mm). |
| 814 | Provision of Lighting in campous as per direction of Engineer-in-charge including all materials , labour T&P etc complete. |
| 815 | Provision of land ecapping and aboriculture in campous as per direction of Engineer-in-charge including all materials , labour T&P etc complete. |
| 816 | Provide all materials, labour T&P etc. required forproper completion of work including leveling, dressing excavation and filling of earth where necessary for develop of water works site including carriage of earth. |
| 817 | REPAIR OF EXISTING BOUNDARY WALL |
| 818 | First class brick work in 1:4 cement and local sand mortar in superstructure and plinth including supply of all materials, labour T&P etcrequired for proper completion of work. |
| 819 | Dismantling existing plaster over damage/cracked surface includingsupply of all materials, labour T&P etc. required for proper completionof the work. |
| 820 | 12 mm thick plaster with cement and local sand mortar in proportionof 1:6 over brick work, minimum thickness not be less than 10 mmincluding supply of all materials labour, T&P etc required for propercompletion of work. |
| 821 | Provision of coping on the top of wall |
| 822 | Provision of barbed iron wire fencing to posts in four rows. |
| 823 | Provision M.S. iron angle (50x50x6mm) for the barbed wire fixing and 2 meter C/C. |
| 824 | Cement concrete with 20 mm gauge approved stone ballast coarsesand and cement in proporation 4:2:1 including supply of all materials, labour, T&P etc required for fixing M.S. Iron angle proper completion of work. |
| 825 | Raised pointing with cement mortar 1:4 consisting or cement andlocal sand on brick work including supply of all materials. labour,T&P etc, of the wrok. |
| 826 | White washing in three coat including supply of all materials, labour,T&P etc. complete required for proper completion of the work. |
| 827 | Providing plaster of Paris wall putty of 2mm thickness over plasteredsurface to prepare the surface even and smooth complete. |
| 828 | Apex Ultima /Acrylic Exterior/ interior paint of approved brand &manufacturer & of required shade on under coated wall surface to givean uniform surface over one primer coat of white cement of approvedbrand after thoroughly brushing and rubbing the surface free frommortar droppings & other foreign matters including prepairing evensurface with plaster of paris including supply of all material labour |
| 829 | T&P etc required for proper completion of work. |
| 830 | Site clearence &other unforceen item. |
| 831 | Extend New Boundry Wall area |
| 832 | Provide all materials, labour T&P etc. required for proper completion of work and construct pillars as per type design and fixing of gate 3.6 m wide gate and 1.2 m wicket gate. |
| 833 | Provide all materials, labour T&P etc. required for proper completion of work and construct Interlocking approach road. |
| 834 | Leveling, dressing, repairing of road in water works compound |
| 835 | ZONE-5 |
| 836 | Pump House |
| 837 | Provide all materials, labour, T&P complete Pump Housesize (3.60 x 3.00 x 3.00 m) cum chlornating room (2.25 x 2.25 x 3.00 m) as per type design. |
| 838 | RISING MAIN AND BYE PASS ARRANGEMENT (ZONE-V) |
| 839 | Supply of the following pipes including railway freight, insurance charges F.O.R. etc. complete. 200 mm dia D.I. Class K-9 From Tube wells to OHT including bye pass |
| 840 | Supply of D.I. specials for the above pipe lines |
| 841 | Carting, laying and jointing of the following sizes of pipes into the trenches including cost of all jointing materials,labour and T&P, testing etc. complete. |
| 842 | From Tube wells to OHT including bye pass |
| 843 | Earth work in ordinary soil with lift upto 1.50 m and lead upto 50 m, filling, watering and ramming of excavated earth into the trenches and disposal of surplus earth upto 50 m. |
| 844 | Supply of following sizes of C.I. D/F sluice valves as per I.S. 780-1960 tested to 10 Kg/sqm fixing in pipe line trenches, jointing and testing complete. 200 mm dia |
| 845 | Carting of D/F sluice valves of following sizes to the site of works lowering them into already prepared trenches and fixing them in position including supply of jointing materials such as bolt nut, rubber insertion white lead complete with excluding values and specials required but including the testing etc. complete excluding values and specials required but including the testing etc. complete. |
| 846 | 200 mm dia |
| 847 | Supply of all materials, labour, T&P and construction of following chambers as per type design including supply and materials, labour and T&P, testing etc. complete. Masonry Type |
| 848 | Supply of all materials, labour, and T & P etc. and construct R.C.C. thrust blocks. |
| 849 | R.C.C. work in 1:1.5:3. |
| 850 | Mild steel work |
| 851 | Dismantling and reinstatement of following type of road surfaces for lying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials. |
| 852 | C.C. Road |
| 853 | REPAIRING OF ONE NO. EXISTING OVERHEAD TANK (450 Kl/15M) (ZONE-V) |
| 854 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.(As Per DSR) |
| 855 | Providing and applying one coat of slurry of hydrophilic in nature for waterproofing treatment of internal surface ofthe Over Head Tank. (Rate From Delhi Schedule of rates.) |
| 856 | Supply and fixing of scaffolding in internal dome required for the proper completion of above work. |
| 857 | Stacking/Proper disposal of dismantled plaster material as directed by the Engineer-in-charge. |
| 858 | Supply of all material labour T&P vertical pipe including fixing of all D.I pipe after dismantling. |
| 859 | Painting, Colour washing of OHT, ladder, with approved quality paint. Asian Apex Paint) |
| 860 | Reparing and fixing of G.I. Railing hand post, stair case |
| 861 | Supply of sluice valves with all material, labour T&P etc complete |
| 862 | 200 mm to above dia |
| 863 | DISTRIBUTION SYSTEM (ZONE-V) |
| 864 | Excavation for pipe line trenches in Ordinary soil,(lime, clayor sand Including lift up to 1.5m and lead up To 50m andrefilling, watering, Ramming of excavated earth in totrenches and disposal of surplus earth up to 50 m from thecenter of the foundation trenches. |
| 865 | Supply of the following sizes of pipes confirming to I.S.4984:1995, I.S.-8329/2000 latest relevant of I.S.S. withcouplers etc complete in all respect F.O.R. destinationincluding all taxes and insurance. |
| 866 | HDPE Pipe PN-6 (O. D.) PE-100 |
| 867 | 110 mm dia |
| 868 | 140 mm dia |
| 869 | 160 mm dia |
| 870 | DI Pipe K-7 |
| 871 | 200 mm dia |
| 872 | Supply of Specials for above pipe F.O.R destination including all Taxes and insurance. |
| 873 | HDPE Pipe PN-6 (O. D.) PE-100 |
| 874 | DI Pipe K-7 |
| 875 | Carting from the store (up to 8 Km.) The following sizes of pipe and specials to the site of work lowering them in to trenches and laying true to alignment and gradient including jointing of pipe with electrofusion sockets, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. complate but excluding cost of trenching and cutting of pipes etc. For making of lengths but including making joints. |
| 876 | HDPE Pipe PN-6 (O. D.) PE-100 |
| 877 | 110 mm dia |
| 878 | 140 mm dia |
| 879 | 160 mm dia |
| 880 | DI Pipe K-7 |
| 881 | 200 mm dia |
| 882 | Supply of following types of fittings including railways freight, cartage up to store, all taxes and duties complete. |
| 883 | C.I. Double flanged Sluice /Scour Valves as per I.S. 780/1969 class-1 working pressure 10 Kg/sqm F.O.R Destination including all taxes and insurance. |
| 884 | C.I. Double flanged Sluice Valves |
| 885 | 100 mm |
| 886 | 125 mm |
| 887 | 200 mm |
| 888 | Scour Valves |
| 889 | 80 mm dia |
| 890 | Fire Hydrants |
| 891 | 80 mm |
| 892 | Carting of following fittings of following sizes to the site of works lowering them into already prepared trenches and fixing them in position including supply of jointing materials such as bolt nut, rubber insertion white lead complete with excluding values and specials required but including the testing etc. complete excluding values and specials required but including the testing etc. complete. |
| 893 | C.I. Double flanged Sluice Valves |
| 894 | 100 mm |
| 895 | 125 mm |
| 896 | 200 mm |
| 897 | Scour Valves |
| 898 | 80 mm dia |
| 899 | Fire Hydrants |
| 900 | 80 mm |
| 901 | Supply of all materials, labour T&P Etc. required and construction of following chambers as per type design including supply and materials labour, T & P etc. complete. construction of following chambers as per type design including supply and materials labour, T & P etc. complete. |
| 902 | Masonry Type |
| 903 | Fire Hydrants |
| 904 | Dismantling of following type of surface including sorting out and staking of serviceable materials of disposal of unserviceable materials up to a distance of 50 m. |
| 905 | B.O.E. ROAD |
| 906 | Bituminous Road |
| 907 | CC Road |
| 908 | Inter locking Road |
| 909 | Reinstatment of following type of surface including sorting outand staking of serviceable materials of disposal of unserviceable materials up to a distance of 50 m. |
| 910 | BOE pavement (40%, with new bricks) |
| 911 | BOE pavement (100% with new bricks) |
| 912 | Bituminous Road |
| 913 | CC Road |
| 914 | Interlocking Tiles (40% with new tiles) |
| 915 | Interlocking Tiles (100% with new tiles) |
| 916 | 100mm thick P.C.C.1:4:8 for subbase of interlocking tile road |
| 917 | Crossing of Culvert for laying pipe line including supply and materials labour, T&P etc. complete.upto 3.50M |
| 918 | 3.50M to 7.0M |
| 919 | Crossing of Road for laying pipe line including supply andmaterials labour, T&P etc. complete. |
| 920 | upto 3.0 M wide Road |
| 921 | 3.50M to 7.0M |
| 922 | Provission for crossing of drain for laying pipe line includingsupply and materials labour, T&P etc. complete. |
| 923 | Upto 1.00m |
| 924 | 1.00 to 2.00m |
| 925 | 2.00 to 3.00m |
| 926 | HOUSE CONNECTION ON NEW/EXTENSION PIPE LINE (ZONE-V) |
| 927 | Making House Connection with distribution main including dismantling of road, supply, carting of specials, Lowering them into trances, fixing them in proper alignment and jointing including bailing out to water, necessary excavation for connection including all labour, T&P etc. required for proper completion of the work. |
| 928 | In B.O.E. Roads |
| 929 | For 90 mm to 110 mm dia |
| 930 | For 140 mm to 160 mm dia |
| 931 | For 200 mm to 250 mm dia |
| 932 | In Bituminous Road |
| 933 | For 90 mm to 110 mm dia |
| 934 | For 140 mm to 160 mm dia |
| 935 | For 200 mm to 250 mm dia |
| 936 | In C. C. Roads |
| 937 | For 90 mm to 110 mm dia |
| 938 | For 140 mm to 160 mm dia |
| 939 | For 200 mm to 250 mm dia |
| 940 | In C. C. Interlocking tiles Roads |
| 941 | For 90 mm to 110 mm dia |
| 942 | For 140 mm to 160 mm dia |
| 943 | For 200 mm to 250 mm dia |
| 944 | In Earthen Roads |
| 945 | For 90 mm to 110 mm dia |
| 946 | For 140 mm to 160 mm dia |
| 947 | HOUSE CONNECTION ON NEW/EXTENSION PIPE LINE (ZONE-V) |
| 948 | Making House Connection with distribution main including dismantling of road, supply, carting of specials, Lowering them into trances, fixing them in proper alignment and jointing including bailing out to water, necessary excavation for connection including all labour, T&P etc. required for proper completion of the work. |
| 949 | In B.O.E. Roads |
| 950 | For 90 mm to 110 mm dia |
| 951 | In Bituminous Road |
| 952 | For 90 mm to 110 mm dia |
| 953 | For 140 mm to 160 mm dia |
| 954 | For 200 mm to 250 mm dia |
| 955 | In C. C. Roads |
| 956 | For 90 mm to 110 mm dia |
| 957 | For 140 mm to 160 mm dia |
| 958 | For 200 mm to 250 mm dia |
| 959 | In C. C. Interlocking tiles Roads |
| 960 | For 90 mm to 110 mm dia |
| 961 | For 140 mm to 160 mm dia |
| 962 | BOUNDARY WALL, GATE SITE DEVELOPMENT & APPROACH ROAD (ZONE-V) |
| 963 | Provide all materials; labour T&P etc. for the Boundary wall as per direction of Engineer-in- charge. |
| 964 | Provide all materials, labour T&P etc. required for proper completion of work and construct pillars as per type design and fixing of gate 3.6 m wide gate and 2.4 m wicket gate. |
| 965 | Provide all materials, labour T&P etc. required forproper completion of work and construct Interlocking approach road. |
| 966 | Construction of Drain as per type design in all materials, labour T&P etc. required for proper completion of work inside campous for proper drainage. Size (300 mm x 300 mm). |
| 967 | Provision of Lighting in campous as per direction of Engineer-in-charge including all materials , labour T&P etc complete. |
| 968 | Provision of land ecapping and aboriculture in campous as per direction of Engineer-in-charge including all materials , labour T&P etc complete. |
| 969 | Provide all materials, labour T&P etc. required forproper completion of work including leveling, dressing excavation and filling of earth where necessary for develop of water works site including carriage of earth. |
| 970 | REPAIR OF EXISTING BOUNDARY WALL |
| 971 | First class brick work in 1:4 cement and local sand mortar in superstructure and plinth including supply of all materials, labour T&P etcrequired for proper completion of work. |
| 972 | Dismantling existing plaster over damage/cracked surface includingsupply of all materials, labour T&P etc. required for proper completionof the work. |
| 973 | 12 mm thick plaster with cement and local sand mortar in proportionof 1:6 over brick work, minimum thickness not be less than 10 mmincluding supply of all materials labour, T&P etc required for propercompletion of work. |
| 974 | Provision of coping on the top of wall |
| 975 | Provision of barbed iron wire fencing to posts in four rows. |
| 976 | Provision M.S. iron angle (50x50x6mm) for the barbed wire fixing and 2 meter C/C. |
| 977 | Cement concrete with 20 mm gauge approved stone ballast coarsesand and cement in proporation 4:2:1 including supply of all materials, labour, T&P etc required for fixing M.S. Iron angle propercompletion of work. |
| 978 | Raised pointing with cement mortar 1:4 consisting or cement andlocal sand on brick work including supply of all materials. labour,T&P etc, of the wrok. |
| 979 | White washing in three coat including supply of all materials, labour,T&P etc. complete required for proper completion of the work. |
| 980 | Providing plaster of Paris wall putty of 2mm thickness over plasteredsurface to prepare the surface even and smooth complete. |
| 981 | Apex Ultima /Acrylic Exterior/ interior paint of approved brand &manufacturer & of required shade on under coated wall surface to givean uniform surface over one primer coat of white cement of approvedbrand after thoroughly brushing and rubbing the surface free frommortar droppings & other foreign matters including prepairing evensurface with plaster of paris including supply of all material labour |
| 982 | T&P etc required for proper completion of work. |
| 983 | Site clearence &other unforceen item. |
| 984 | Provide all materials, labour T&P etc. required for proper completion of work and construct pillars as per type design and fixing of gate 3.6 m wide gate and 2.4 m wicket gate. |
| 985 | Provide all materials, labour T&P etc. required for proper completionof work and construct Interlocking approach road. |
| 986 | Leveling, dressing, repairing of road in water works compound |
| 987 | REPAIR OF ONE NO. EXISTING STAFF QUARTER (ZONE-V) |
| 988 | Ist Class brick work in 1:4 cement and local sand mortar in superstructure including supply of all material, labour, T&P etc required for proper completion of the work. (Thickness of wall to one brick thick). |
| 989 | Dismantling existing plaster over damage/cracked surface including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 990 | Stacking/proper disposal of chiseld plaster as directed by the Engineer-in- charge. |
| 991 | 12 mm thick plaster with cement & coarse sand mortar in 1:1:5 over brick work minimum thickness not to be less than 12 mm finished with 3 mm floting coating of neat cement including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 992 | Scraping old color washing and preparing the surface by removing loos material etc. including all labour and T&P etc complete. |
| 993 | 40 mm thick over base concrete consisting of cement, local sand and 40 mm gauge first class brick ballast in the proportion of 1:4:8. For construction of apron 0.6 m wide. |
| 994 | Laying of Ceramic floor tiles on the floor including supply of all materials, labour, T&P etc. complete required for roper completion of the work. |
| 995 | White washing in three coat including supply of all materials, labour, T&P etc. complete required for proper completion of the work |
| 996 | Providing plaster of Paris wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 997 | Apex Ultima /Acrylic Exterior/ interior paint of approved brand & manufacturer & of required shade on under coated wall surface to give an uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work. |
| 998 | Supply and fixing of Iron doors including supply of all materials,paints, labour T&P etc. required for proper completion of the work. |
| 999 | Repair for electric fitting |
| 1000 | Repair for sanitation work |
| 1001 | Site clearence and other unforseen items. |
| 1002 | ZONE-6 |
| 1003 | REPAIRING OF ONE NO. EXISTING PUMP HOUSE (ZONE-VI) |
| 1004 | I class brick work in 1 : 4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 1005 | Dismantling existing plaster over damage/cracked surface includingsupply of all materials, labour T&P etc. required for proper completion of the work. |
| 1006 | Stacking/proper disposal of chiseld plaster as directed by the Engineer- in-charge. |
| 1007 | Racking of joints in wall in exposed surface to poperly prepare surface for new plaster work including supply of all materials, labour T&P etc.required for proper completion of the work. |
| 1008 | 12 mm thick plaster with cement & coarse sand mortar in 1:1:6 overbrick work minimum thickness not to be less than 12 mm finished with 3 mm floting coating of neat cement including supply of all materials, labour T&P etc. required for proper completion of the work. |
| 1009 | Repair for electric fitting |
| 1010 | Reparing of floor in P.C.C. 1:2:4 |
| 1011 | First class brick work in 1:4 cement and local sand mortar in superstructure including supply of all materials labour T&P etc required for proper completion of For construction of apron 0.6 m wide work.structure including supply of all materials labour T&P etc required for proper completion of For construction of apron 0.6 m wide work. |
| 1012 | Same as item no. 3 above but 25 mm thick PCC floor laid over base concrete consisting of cement, local sand and 40mm gauge first class brick ballast in the proportion of 1:4:8. For construction of apron 0.6m wide. |
| 1013 | Supply and fixing of flush door including supply of all materials, labour \T&P etc. required for proper completion of the work. |
| 1014 | Supply and fix angle iron door chaukhat of size 50mm x 50mm x 6 mm including supply of all materials, labour T&P etc. required for Proper completion of the work. |
| 1015 | 1. Door frame (2 Nos.) |
| 1016 | 2. Window frame (4 Nos.) |
| 1017 | Supply and fixing of 1mm thick sheet iron panelled door/ windowshutters including supply and fixing and adjustment of Cleats, stops,hings, locks, bolts, handles. Spring and other fittings.( Excluding suplly of fittings). |
| 1018 | Supply of oxidized iron fittings of approved make for doors and window. |
| 1019 | 11.5 cm string or drip-coarse in 1:6 cement and local sand mortor. |
| 1020 | Painting or varnishing new iron work in small areas or new wood work with one priming coat and two coats of approved paints or varnish including supply of all materials labour, T&P etc required for proper completion of work. |
| 1021 | White cement in three coats including supply of all materials labour,T&P etc required for proper completion of work. |
| 1022 | Providing plaster of Paris wall putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 1023 | Apex Ultima /Acrylic Exterior/ interior paint of approved brand & anufacturer & of required shade on under coated wall surface to givean uniform surface over one primer coat of white cement of approved brand after thoroughly brushing and rubbing the surface free from mortar droppings & other foreign matters including prepairing even surface with plaster of paris including supply of all material labour T&P etc required for proper completion of work. |
| 1024 | Supply and fixing 3 mm thick plain glass in windows including supplyof all materials labour, T&P etc required for proper completion of work. |
| 1025 | Supply and fixing of 100 mm dia CI pipe rain water down pipe withclamp etc. |
| 1026 | Site clearence and other unforseen items. |
| 1027 | REPAIRING OF ONE NO. EXISTING OVERHEAD TANK (450 Kl/15M) (ZONE-VI) |
| 1028 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.(As Per DSR) |
| 1029 | Providing and applying one coat of slurry of hydrophilic in nature forwaterproofing treatment of internal surface of the Over Head Tank. (Rate From Delhi Schedule of rates.) |
| 1030 | Supply and fixing of scaffolding in internal dome required for the proper completion of above work. |
| 1031 | Stacking/Proper disposal of dismantled plaster material as directed by the Engineer-in-charge. |
| 1032 | Supply of all material labour T&P vertical pipe including fixing of all D.I pipe after dismantling. |
| 1033 | Painting, Colour washing of OHT, ladder, with approved quality paint.(Asian Apex Paint) |
| 1034 | Reparing and fixing of G.I. Railing hand post, stair case |
| 1035 | Supply of sluice valves with all material, labour T&P etc complete |
| 1036 | 200 mm to above dia |
| 1037 | Site clearence and other unforseen items. |
| 1038 | DISTRIBUTION SYSTEM (ZONE-VI) |
| 1039 | Excavation for pipe line trenches in Ordinary soil,(lime, clay or sand Including lift up to 1.5m and lead up To 50m and refilling, watering, Ramming of excavated earth in totrenches and disposal of surplus earth up to 50 m from the center of the foundation trenches. |
| 1040 | Supply of the following sizes of pipes confirming to I.S. 4984:1995, I.S.-8329/2000 latest relevant of I.S.S. with couplers etc complete in all respect F.O.R. destination including all taxes and insurance. |
| 1041 | HDPE Pipe PN-6 (O. D.) PE-100 |
| 1042 | 90 mm dia |
| 1043 | 110 mm dia |
| 1044 | 140 mm dia |
| 1045 | 160 mm dia |
| 1046 | DI Pipe K-7 |
| 1047 | 200 mm dia |
| 1048 | 250 mm dia |
| 1049 | 300 mm dia |
| 1050 | 350 mm dia |
| 1051 | Supply of Specials for above pipe F.O.R destination includingall Taxes and insurance. |
| 1052 | HDPE Pipe PN-6 (O. D.) PE-100 |
| 1053 | DI Pipe K-7 |
| 1054 | Carting from the store (up to 8 Km.) The following sizes of pipe and specials to the site of work lowering them in to trenches and laying true to alignment and gradient including jointing of pipe with electrofusion sockets, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. complate but excluding cost of trenching and cutting of pipes etc. For making of lengths but including making joints. |
| 1055 | HDPE Pipe PN-6 (O. D.) PE-100 |
| 1056 | 90 mm dia |
| 1057 | 110 mm dia |
| 1058 | 140 mm dia |
| 1059 | 160 mm dia |
| 1060 | DI Pipe K-7 |
| 1061 | 200 mm dia |
| 1062 | 250 mm dia |
| 1063 | 300 mm dia |
| 1064 | 350 mm dia |
| 1065 | Supply of following types of fittings including railways freight, cartage up to store, all taxes and duties complete. |
| 1066 | C.I. Double flanged Sluice /Scour Valves as per I.S. 780/1969 class-1 working pressure 10 Kg/sqm F.O.R Destination including all taxes and insurance. |
| 1067 | C.I. Double flanged Sluice Valves |
| 1068 | 80 mm |
| 1069 | 100 mm |
| 1070 | 125 mm |
| 1071 | 150 mm |
| 1072 | 200 mm |
| 1073 | 250 mm |
| 1074 | Scour Valves |
| 1075 | 80 mm dia |
| 1076 | Air Valves |
| 1077 | 25 mm |
| 1078 | Fire Hydrants |
| 1079 | 80 mm |
| 1080 | Carting of following fittings of following sizes to the site of works lowering them into already prepared trenches and fixing them in position including supply of jointing materials such as bolt nut, rubber insertion white lead complete with excluding values and specials required but including the testing etc. complete excluding values and specials required but including the testing etc. complete. |
| 1081 | C.I. Double flanged Sluice Valves |
| 1082 | 80 mm |
| 1083 | 100 mm |
| 1084 | 125 mm |
| 1085 | 150 mm |
| 1086 | 200 mm |
| 1087 | 250 mm |
| 1088 | Scour Valves |
| 1089 | 80 mm dia |
| 1090 | Air Valves |
| 1091 | 25 mm |
| 1092 | Fire Hydrants |
| 1093 | 80 mm |
| 1094 | Supply of all materials, labour T&P Etc. required and construction of following chambers as per type design including supply and materials labour, T & P etc. complete. |
| 1095 | Surface Box Type |
| 1096 | Masonry Type |
| 1097 | Air Valves |
| 1098 | Fire Hydrants |
| 1099 | Dismantling of following type of surface including sorting out and staking of serviceable materials of disposal of unserviceable materials up to a distance of 50 m. |
| 1100 | B.O.E. ROAD |
| 1101 | Bituminous Road |
| 1102 | CC Road |
| 1103 | Inter locking Road |
| 1104 | Reinstatment of following type of surface including sorting out and staking of serviceable materials of disposal of unserviceable materials up to a distance of 50 m. |
| 1105 | BOE pavement (40%, with new bricks) |
| 1106 | BOE pavement (100% with new bricks) |
| 1107 | Bituminous Road |
| 1108 | CC Road |
| 1109 | Interlocking Tiles (40% with new tiles) |
| 1110 | Interlocking Tiles (100% with new tiles) |
| 1111 | 100mm thick P.C.C.1:4:8 for subbase of interlocking tile road |
| 1112 | Crossing of Culvert for laying pipe line including supply and materials labour, T&P etc. complete. upto 3.50M |
| 1113 | 3.50M to 7.0M |
| 1114 | Crossing of Road for laying pipe line including supply andmaterials labour, T&P etc. complete. |
| 1115 | upto 3.0 M wide Road |
| 1116 | 3.50M to 7.0M |
| 1117 | Provission for crossing of drain for laying pipe line includingsupply and materials labour, T&P etc. complete. |
| 1118 | Upto 1.00m |
| 1119 | 1.00 to 2.00m |
| 1120 | 2.00 to 3.00m |
| 1121 | Provision for laying of pipeline by trenchless technologyincluding supply of different sizes M.S. casing pipe, labour T&P etc. required for proper completion of the work. |
| 1122 | 200 mm dia |
| 1123 | 250 mm dia |
| 1124 | 300 mm dia |
| 1125 | Making interconnection in 90 to 500 mm dia AC/P.V.C./HDPE / DI pipes including supply, carting of specials, lowering them into tranches, cutting, fixing them in proper alignment and jointing including balling out of water, necessary excavation for connection and barricading including all labour, T&P etc. required for proper completion of the work. |
| 1126 | 200 mm to 90 mm |
| 1127 | 160 mm to 90 mm |
| 1128 | 140 mm to 90 mm |
| 1129 | 90 mm to 90 mm |
| 1130 | HOUSE CONNECTION ON EXISTING PIPE LINE |
| 1131 | Making House Connection with distribution main including dismantling of road,supply, carting of specials, Lowering them into trances, fixing them in properalignment and jointing including bailing out to water, necessary excavation forconnection including all labour, T&P etc. required for proper completion of thework. |
| 1132 | In B.O.E. Roads |
| 1133 | For 90 mm to 110 mm dia |
| 1134 | In Bituminous Roads |
| 1135 | For 90 mm to 110 mm dia |
| 1136 | For 250 mm to 300 mm dia |
| 1137 | In C. C. Roads |
| 1138 | For 90 mm to 110 mm dia |
| 1139 | For 140 mm to 160 mm dia |
| 1140 | For 200 mm to 250 mm dia |
| 1141 | For 250 mm to 300 mm dia |
| 1142 | In C. C. Interlocking tiles Roads |
| 1143 | For 90 mm to 110 mm dia |
| 1144 | For 140 mm to 160 mm dia |
| 1145 | For 200 mm to 250 mm dia |
| 1146 | For 250 mm to 300 mm dia |
| 1147 | In Earthen Roads |
| 1148 | For 90 mm to 110 mm dia |
| 1149 | HOUSE CONNECTION ON NEW/EXTENSION PIPE LINE (ZONE-VI) |
| 1150 | Making House Connection with distribution main including dismantling of road, supply, carting of specials, Lowering them into trances, fixing themin proper alignment and jointing including bailing out to water, necessary excavation for connection including all labour, T&P etc. required for proper completion of the work. |
| 1151 | In B.O.E. Roads |
| 1152 | For 90 mm to 110 mm dia |
| 1153 | For 200 mm to 250 mm dia |
| 1154 | For 250 mm to 300 mm dia |
| 1155 | In Bituminous Road |
| 1156 | For 90 mm to 110 mm dia |
| 1157 | For 140 mm to 160 mm dia |
| 1158 | For 200 mm to 250 mm dia |
| 1159 | For 250 mm to 300 mm dia |
| 1160 | In C. C. Roads |
| 1161 | For 90 mm to 110 mm dia |
| 1162 | For 140 mm to 160 mm dia |
| 1163 | For 200 mm to 250 mm dia |
| 1164 | For 250 mm to 300 mm dia |
| 1165 | In C. C. Interlocking tiles Roads |
| 1166 | For 90 mm to 110 mm dia |
| 1167 | For 140 mm to 160 mm dia |
| 1168 | For 200 mm to 250 mm dia |
| 1169 | For 250 mm to 300 mm dia |
| 1170 | In Earthen Roads |
| 1171 | For 90 mm to 110 mm dia |
| 1172 | For 140 mm to 160 mm dia |
| 1173 | For 200 mm to 250 mm dia |
| 1174 | Repairing of old house connection from MDPE and GI pipeincluding all material labour and T&P proper completion of work and as per site engineer incharge. |
| 1175 | 90mm to 200mm dia HDPE pipe |
| 1176 | 250mm dia to 350mm dia DI pipe |
| 1177 | Supply and fixing of end cap for dividing into separate zoneincluding excavation of pit, bailing out of water, fixing the end cap and then again refilling the earth in the pit with all labour, material T&P etc complete. |
| 1178 | 90mm to 200mm dia HDPE pipe |
| 1179 | 250mm dia to 350mm dia DI pipe |
| 1180 | Repairing of Leakages |
| 1181 | HDPE LINE |
| 1182 | For 90mm to 110mm dia B.O.E. ROAD |
| 1183 | For 90mm to 110mm dia CC Road |
| 1184 | For 90mm to 110mm dia Inter locking Road |
| 1185 | REPAIR OF EXISTING BOUNDARY WALL |
| 1186 | First class brick work in 1:4 cement and local sand mortar in superstructure and plinth including supply of all materials, labour T&P etcrequired for proper completion of work. |
| 1187 | Dismantling existing plaster over damage/cracked surface includingsupply of all materials, labour T&P etc. required for proper completionof the work. |
| 1188 | 12 mm thick plaster with cement and local sand mortar in proportionof 1:6 over brick work, minimum thickness not be less than 10 mmincluding supply of all materials labour, T&P etc required for propercompletion of work. |
| 1189 | Provision of coping on the top of wall |
| 1190 | Provision of barbed iron wire fencing to posts in four rows. |
| 1191 | Provision M.S. iron angle (50x50x6mm) for the barbed wire fixing and 2 meter C/C. |
| 1192 | Cement concrete with 20 mm gauge approved stone ballast coarsesand and cement in proporation 4:2:1 including supply of all materials, labour, T&P etc required for fixing M.S. Iron angle proper completion of work. |
| 1193 | Raised pointing with cement mortar 1:4 consisting or cement andlocal sand on brick work including supply of all materials. labour,T&P etc, of the wrok. |
| 1194 | White washing in three coat including supply of all materials, labour,T&P etc. complete required for proper completion of the work. |
| 1195 | Providing plaster of Paris wall putty of 2mm thickness over plasteredsurface to prepare the surface even and smooth complete. |
| 1196 | Apex Ultima /Acrylic Exterior/ interior paint of approved brand &manufacturer & of required shade on under coated wall surface to givean uniform surface over one primer coat of white cement of approvedbrand after thoroughly brushing and rubbing the surface free frommortar droppings & other foreign matters including prepairing evensurface with plaster of paris including supply of all material labour T&P etc required for proper completion of work. |
| 1197 | Site clearence &other unforceen item. |
| 1198 | Provide all materials, labour T&P etc. required for propercompletion of work and construct pillars as per type design andfixing of gate 3.6 m wide gate and 2.4 m wicket gate. |
| 1199 | Provide all materials, labour T&P etc. required for propercompletion of work and construct Interlocking approach road. |
| 1200 | Leveling, dressing, repairing of road in water works compound |
| 1201 | E&M WORKS |
| 1202 | Tubewell 300 x 200 = 2 Nos for Zone -1 |
| 1203 | Transportation of T/W Construction T&P Units |
| 1204 | Transportation, Erection, Dismantling of Rig Machine and its T&P |
| 1205 | Transportation, Erection, Dismantling of Compressor 250/350 PSI |
| 1206 | Transportation, Erection, Dismantling of 2 Cusec/ 3 Cusec O.P. Unit and Yield test |
| 1207 | Supply of Tubewell AssemblyM.S.Tubewell assembly with all required parts like plain pipe, Slotted pipe as required upto 50% of plain pipes rings, well cap bail plug, clamp, reducer, central guide, support structure etc. as required & as per typed design complete in all respect. Note- Axial Length of Reducer without Ring shall be measured with casing pipe |
| 1208 | 300 mm dia M.S. Pipe |
| 1209 | 200 mm dia M.S. Plain/slotted |
| 1210 | PEA-GRAVEL As per IS:4097 |
| 1211 | 1.65 mm to 4.50 mm size Pea gravel of Lalkuwan quarry duly screened, washed and properly stacked at sitefor Tubewell |
| 1212 | Drilling of bore by rig machine As Per IS:2800 Part I & II: |
| 1213 | Drilling of bore by 600 mm dia bit GL to 55 mt. BGL. |
| 1214 | Drilling of bore by 500 mm dia bit from 55 mt GL to 100 mt. BGL. |
| 1215 | Drilling of bore by 500 mm dia bit 100 m BGL to 150 m. BGL. |
| 1216 | Lowering of tube well assembly With M.S. rings, Bail Plug, Reducer Including welding: |
| 1217 | Lowering of 300 mm dia M.S. Housing pipe from GL to 45 m.BGL |
| 1218 | Lowering of 200 mm dia M.S. Plain/slotted pipe 45m. BGL to 100 m. BGL |
| 1219 | Lowering of 200 mm dia M.S. Plain/slotted pipe 100 m. BGL to 135 m. BGL |
| 1220 | Development of tube well by 250 PSI air compressor and 3 cusec O.P. Unit to yield sand free discharge. |
| 1221 | Development and testing of tube well by Air Compressor. |
| 1222 | Development and testing of tube Well O.P.Unit to yield sand free Discharge. |
| 1223 | Chemical and Bacteriological test Analysis of water sample |
| 1224 | Site Clearance |
| 1225 | Logging of borehole by departmental/approved electric logger |
| 1226 | Tubewell 300 x 200 = 5 Nos For Zone -II(1 New + 1 Rb) Zone -III(1 New + 1 Rb) Zone -V(1 New ) |
| 1227 | Transportation of T/W Construction T&P Units |
| 1228 | Transportation, Erection, Dismantling of Rig Machine and its T&P |
| 1229 | Transportation, Erection, Dismantling of Compressor 250/350 PSI |
| 1230 | Transportation, Erection, Dismantling of 2 Cusec/ 3 Cusec O.P. Unit and Yield test |
| 1231 | Supply of Tubewell AssemblyM.S.Tubewell assembly with all required parts like plain pipe, Slotted pipe as required upto 50% of plain pipes rings, well cap bail plug, clamp, reducer, central guide, suport structure etc. as required & as per typed design complete in all respect. Note- Axial Length of Reducer without Ring shall be measured with casing pipe |
| 1232 | 300 mm dia M.S. Pipe |
| 1233 | 200 mm dia M.S. Plain/slotted |
| 1234 | PEA-GRAVEL As per IS:4097 |
| 1235 | 1.65 mm to 4.50 mm size Pea gravel of Lalkuwan quarry duly screened, washed and properly stacked at sitefor Tubewell |
| 1236 | Drilling of bore by rig machine As Per IS:2800 Part I & II: |
| 1237 | Drilling of bore by 600 mm dia bit GL to 55 mt. BGL. |
| 1238 | Drilling of bore by 500 mm dia bit from 55 mt GL to 100 mt. BGL. |
| 1239 | Drilling of bore by 500 mm dia bit 100 m BGL to 155 m. BGL. |
| 1240 | Lowering of tube well assembly With M.S. rings, Bail Plug, Reducer Including welding: |
| 1241 | Lowering of 300 mm dia M.S. Housing pipe from GL to 45 m.BGL |
| 1242 | Lowering of 200 mm dia M.S. Plain/slotted pipe 45 m. BGL to 100 m. BGL |
| 1243 | Lowering of 200 mm dia M.S. Plain/slotted pipe 100 m. BGL to 140 m. BGL |
| 1244 | Development of tube well by 250 PSI air compressor and 3 cusec O.P. Unit to yield sand free discharge. |
| 1245 | Development and testing of tube well by Air Compressor. |
| 1246 | Development and testing of tube Well O.P.Unit to yield sand free Discharge. |
| 1247 | Chemical and Bacteriological test Analysis of water sample |
| 1248 | Site Clearance |
| 1249 | Logging of borehole by departmental/approved electric logger |
| 1250 | Details of New Pumping Plant & Servo Voltage Stabilizer for Zone- 1 (1N+1Rb) |
| 1251 | SITC of Submersible pumpset having capacity 1800 LPM, 48 mtr Head, 30 HP Motor with 24 mtr Column Pipe Assembly, NRV, CIDF Bend 90°, CF A/F Tee, D/F Pipe ( 1.5 m long 2 No.s and 1 m long 1 No.), Earthing, Painting, Toolset, Chainpulley block and all Pumping Plant accessories with nut bolts and rubber packing etc. |
| 1252 | SITC of Soft Starter with RS485 Port-400V Class 22.0 kW for the above pumpset |
| 1253 | Supply, Installation and Commissioning of automatic servo voltage Stabilizer-50 KVA(Input Voltage 230-500V)to Output Voltage 415V± 1% As per IS 9815-1994 |
| 1254 | Additional Column Pipe 3 mtr long |
| 1255 | Internal Electrification of pump house. |
| 1256 | CE/UL certifeid Intelligent Smart Energy Meter |
| 1257 | Moter Operated Actuater with Valves 150 mm size |
| 1258 | Main Switch Incomer Panel |
| 1259 | Actuator Panel |
| 1260 | CE/UL Certifeid Electromagnetic Flow Meter 150 mm size |
| 1261 | Auto Phase reversal unit with inbuilt delay and enclosure control panel etc. |
| 1262 | CE/UL Certifeid Hydrostatic type sub soil water level transmitter for tubewellwith Auxillary bore for installtion near main tubewell (1-3 mtr near to main bore ) |
| 1263 | CE/UL certifeid Surge Protecter at main switch for protect control panel & all scada equipments |
| 1264 | CE/UL certifeid Pressure Transmiter with local display |
| 1265 | CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters |
| 1266 | Complete cabling including power cables of all equipment. |
| 1267 | Control panel with IP54 protection ,industrial grade for all equipments.separate for control (24V) and power equipment |
| 1268 | Earthing of all equipments,Installation, commissioning & testing trial for tubewell |
| 1269 | Security Survelliance IP Camera with required hard drive to store data of atleast 15 Days |
| 1270 | Automatic Chlorination System compatible to SCADA Panels system |
| 1271 | Repairing of existing 3 Nos TWs servo stabilizer,soft starter panel,PLC panel,submersible moter,actuator panel & changingrequired LT cable from transformer to main switch, OHT actuator valve installed at nagar palika campus with dismentalling ,rewinding of actuator motor,gland plate,flapper etc with material and labour chrages etc. |
| 1272 | CE/UL certifeid Radar Type level transmitter for OHT. |
| 1273 | Actuator with valve of 500 mm dia size forOHT of Takhan Old OHT |
| 1274 | CE/UL certifeid Electromagnetic Flowmeters for OHT.size 500 mm |
| 1275 | Installation, commissioning & testing trial of Level Transmitter |
| 1276 | Installation, commissioning & testing trial of Flowmeters. |
| 1277 | Actuator Panel for OHT Actuated Valve |
| 1278 | SITC of UPS of suitable capacity (5 KVA) for operation ofactuators installed at outlet line, in case of power failure at the time of distribution water supply with cabinet casing and required cabling work. For upto 8 hrs backup. |
| 1279 | Details of New Pumping Plant & Servo Voltage Stabilizer for Zone- II (1N+1Rb) |
| 1280 | SITC of Submersible pumpset having capacity 1800 LPM, 48 mtr Head, 30 HP Motor with 24 mtr Column Pipe Assembly, NRV, CIDF Bend 90°, CF A/F Tee, D/F Pipe ( 1.5 m long 2 No.s and 1 m long 1 No.), Earthing, Painting, Toolset, Chainpulley block and all Pumping Plant accessories with nut bolts and rubber packing etc. |
| 1281 | SITC of Soft Starter with RS485 Port-400V Class 22.0 kW for the above pumpset |
| 1282 | Supply, Installation and Commissioning of automatic servo voltage Stabilizer-50 KVA(Input Voltage 230V-500V)to Output Voltage 415V± 1% As per IS 9815-1994 |
| 1283 | Additional Column Pipe 3 mtr long |
| 1284 | Internal Electrification of pump house. |
| 1285 | CE/UL certifeid Intelligent Smart Energy Meter |
| 1286 | Moter Operated Actuater with Valves 150 mm size |
| 1287 | Main Switch Incomer Panel |
| 1288 | Actuator Panel |
| 1289 | CE/UL Certifeid Electromagnetic Flow Meter 150 mm size |
| 1290 | Auto Phase reversal unit with inbuilt delay and enclosure control panel etc. |
| 1291 | CE/UL Certifeid Hydrostatic type sub soil water level transmitter for tubewellwith Auxillary bore for installtion near main tubewell (1-3 mtr near to main bore ) |
| 1292 | CE/UL certifeid Surge Protecter at main switch for protect control panel & all scada equipments |
| 1293 | CE/UL certifeid Pressure Transmiter with local display |
| 1294 | CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters |
| 1295 | Complete cabling including power cables of all equipment. |
| 1296 | Control panel with IP54 protection ,industrial grade for all equipments.separate for control (24V) and power equipment |
| 1297 | Earthing of all equipments,Installation, commissioning & testing trial for tubewell |
| 1298 | Security Survelliance IP Camera with required hard drive to store data of atleast 15 Days |
| 1299 | Automatic Chlorination System compatible to SCADA Panels system |
| 1300 | Repairing of existing 2 Nos TW servo stabilizer,soft starter panel,PLC panel,submersible moter,actuator panel & changingrequired LT cable etc .Repairing of OHT actuator valve installed at meena bazar oht campus with dismentalling ,rewinding of actuator motor,repairing of shaft ,gland plate,changing of flapper etc with material and labour chrages etc. |
| 1301 | SITC of UPS of suitable capacity (5 KVA) for operation ofactuators installed at outlet line, in case of power failure at the time of distribution water supply with cabinet casing and required cabling work. For upto 8 hrs backup. |
| 1302 | Details of New Pumping Plant & Servo Voltage Stabilizer for Zone- III (1 New+1 Rb + 1 No Existing & OHT Automation) |
| 1303 | SITC of Submersible pumpset having capacity 1800 LPM, 48 mtr Head, 30 HP Motor with 24 mtr Column Pipe Assembly, NRV, CIDF Bend 90°, CF A/F Tee, D/F Pipe ( 1.5 m long 2 No.s and 1 m long 1 No.), Earthing, Painting, Toolset, Chainpulley block and all Pumping Plant accessories with nut bolts and rubber packing etc. |
| 1304 | SITC of Soft Starter with RS485 Port-400V Class 22.0 kW for the above pumpset |
| 1305 | Supply, Installation and Commissioning of automatic servo voltage Stabilizer-50 KVA(Input Voltage 230V-500V)to Output Voltage 415V± 1% As per IS 9815-1994 |
| 1306 | Additional Column Pipe 3 mtr long |
| 1307 | Internal Electrification of pump house. |
| 1308 | CE/UL certifeid Intelligent Smart Energy Meter |
| 1309 | Moter Operated Actuater with Valves 150 mm size |
| 1310 | Main Switch Incomer Panel |
| 1311 | Actuator Panel |
| 1312 | CE/UL Certifeid Electromagnetic Flow Meter 150 mm size |
| 1313 | Auto Phase reversal unit with inbuilt delay and enclosure control panel etc. |
| 1314 | CE/UL Certifeid Hydrostatic type sub soil water level transmitter for tubewellwith Auxillary bore for installtion near main tubewell (1-3 mtr near to main bore ) |
| 1315 | CE/UL certifeid Surge Protecter at main switch for protect control panel & all scada equipments |
| 1316 | CE/UL certifeid Pressure Transmiter with local display |
| 1317 | CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters |
| 1318 | Complete cabling including power cables of all equipment. |
| 1319 | Control panel with IP54 protection ,industrial grade for all equipments.separate for control (24V) and power equipment |
| 1320 | Earthing of all equipments,Installation, commissioning & testing trial for tubewell |
| 1321 | Security Survelliance IP Camera with required hard drive to store data of atleast 15 Days |
| 1322 | Automatic Chlorination System compatible to SCADA Panels system |
| 1323 | Repairing of existing 1 No TW servo stabilizer,soft starter panel,PLC panel,submersible moter,actuator panel & changingrequired LT cablewith material and labour chrages etc. |
| 1324 | CE/UL certifeid Radar Type level transmitter for OHT. |
| 1325 | Actuator with valve of 250 mm dia size forOHT of awas vikas |
| 1326 | CE/UL certifeid Electromagnetic Flowmeters for OHT.size 250 mm |
| 1327 | Actuator with valve of 500 mm dia size forOHT of jaisantari |
| 1328 | CE/UL certifeid Electromagnetic Flowmeters for OHT.size 500 mm |
| 1329 | Installation, commissioning & testing trial of Level Transmitter |
| 1330 | Installation, commissioning & testing trial of Flowmeters. |
| 1331 | Actuator Panel for OHT Actuated Valve |
| 1332 | SITC of UPS of suitable capacity (3 KVA) for operation ofactuators installed at outlet line, in case of power failure at the time of distribution water supply with cabinet casing and required cabling work. For upto 8 hrs backup. |
| 1333 | Details of New Pumping Plant & Servo Voltage Stabilizer for Zone- VPP+Booster P.P |
| 1334 | SITC of Submersible pumpset having capacity 1800 LPM, 48 mtr Head, 30 HP Motor with 24 mtr Column Pipe Assembly, NRV, CIDF Bend 90°, CF A/F Tee, D/F Pipe ( 1.5 m long 2 No.s and 1 m long 1 No.), Earthing, Painting, Toolset, Chainpulley block and all Pumping Plant accessories with nut bolts and rubber packing etc. |
| 1335 | SITC of Soft Starter with RS485 Port-400V Class 22.0 kW for the above pumpset |
| 1336 | Supply, Installation and Commissioning of automatic servo voltage Stabilizer-50 KVA(Input Voltage 230V-500V)to Output Voltage 415V± 1% As per IS 9815-1994 |
| 1337 | Additional Column Pipe 3 mtr long |
| 1338 | Internal Electrification of pump house. |
| 1339 | CE/UL certifeid Intelligent Smart Energy Meter |
| 1340 | Moter Operated Actuater with Valves 150 mm size |
| 1341 | Main Switch Incomer Panel |
| 1342 | Actuator Panel |
| 1343 | CE/UL Certifeid Electromagnetic Flow Meter 150 mm size |
| 1344 | Auto Phase reversal unit with inbuilt delay and enclosure control panel etc. |
| 1345 | CE/UL Certifeid Hydrostatic type sub soil water level transmitter for tubewellwith Auxillary bore for installtion near main tubewell (1-3 mtr near to main bore ) |
| 1346 | CE/UL certifeid Surge Protecter at main switch for protect control panel & all scada equipments |
| 1347 | CE/UL certifeid Pressure Transmiter with local display |
| 1348 | CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters |
| 1349 | Complete cabling including power cables of all equipment. |
| 1350 | Control panel with IP54 protection ,industrial grade for all equipments.separate for control (24V) and power equipment |
| 1351 | Earthing of all equipments,Installation, commissioning & testing trial for tubewell |
| 1352 | Automatic Chlorination System compatible to SCADA Panels system |
| 1353 | Repairing of existing TWservo stabilizer,soft starter panel,PLC panel,submersible moter,actuator panel & changingrequired LT cable etc for nakta dana TW. |
| 1354 | CE/UL certifeid Radar Type level transmitter for OHT. |
| 1355 | Actuator with valve of 200 mm dia size forOHT of kashiram awas existing OHT |
| 1356 | CE/UL certifeid Electromagnetic Flowmeters for OHT.size 200 mm |
| 1357 | Installation, commissioning & testing trial of Level Transmitter |
| 1358 | Installation, commissioning & testing trial of Flowmeters. |
| 1359 | Actuator Panel for OHT Actuated Valve |
| 1360 | SITC of UPS of suitable capacity (3 KVA) for operation ofactuators installed at outlet line, in case of power failure at the time of distribution water supply with cabinet casing and required cabling work. Upto 8 Hrs backup. |
| 1361 | Design and SITC of Booster Pumping Plant 05 Nos Pump Set (03 Nos working + 01 No standby ) and 01 No spare pump setin store for boosting pumping head upto 5.0 mtr withdischarge capacity 44.0 cum/hrscomplete in all respect with its all required accessories such as DF Pipe, Tee, Bend,Common Header, Actuated Valves,Pressure transmitter, VFD Panel etc. for each pump set Compatible to SCADA/Automation system for smooth operation of pumpsAs per requirement of water supply in respectedDMA / as per direction of engineer incharge. |
| 1362 | Supply, Installation and Commissioning of automatic servo voltage Stabilizer 15 KVA(Input Voltage 230V-500V)to Output Voltage 415V± 1% As per IS 9815-1994 |
| 1363 | CE & UL Certifeid PLC/RTU in IP 54 enclousure suitable to communicate with GSM based modem unit with CPU and power supply with analog and digital parameter and features as specifeid for tubewell to store and transmit data on GSM backbone RTU/PLC designed with logic to transfer data at multiple stations specifeid. |
| 1364 | GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote site to control station all accessoreis included with signal enhancer antenna made for pumping plant internet charges as specifeid |
| 1365 | Providing, lowering, laying, aligning, fixing in position jointing in pipeline of 200 mm dia D/F DI Plunger valve (Flow Control Valve) PN 1.0 class with electrical actuator suitable for SCADA compatibility complete (including jointing & jointing material) including all material, labour, testing and commissioning as per Technical Specification & as per direction of engineer. |
| 1366 | Designing, Supplying, Installing, commissioning & testing of Pressure Transmitter Battery Fitted CE marked with following technical parameters and Interfacing with PLC module alongwith data communication with SCADA System including Mounting arrangement. Output 4-20 mA / HARTPower supply - 24V DC Display - 4\" LEDAccuracy - +/- 0.1 %of full scale or better Enclosure- IP 68 All arrangements Shall be in MS Fabricated Cabin/Enclosure Mounted on Ground or Wall. |
| 1367 | SITC of UPS of suitable capacity (3 KVA) for operation ofactuators installed at outlet line, in case of power failure at the time of distribution water supply with cabinet casing and required cabling work. Upto 8 Hrs backup. |
| 1368 | Details ofZone- VIDMA-1 & DMA2 |
| 1369 | SITC of Submersible pumpset having capacity 1800 LPM, 48 mtr Head, 30 HP Motor with 24 mtr Column Pipe Assembly, NRV, CIDF Bend 90°, CF A/F Tee, D/F Pipe ( 1.5 m long 2 No.s and 1 m long 1 No.), Earthing, Painting, Toolset, Chainpulley block and all Pumping Plant accessories with nut bolts and rubber packing etc. |
| 1370 | SITC of Soft Starter with RS485 Port-400V Class 22.0 kW for the above pumpset |
| 1371 | Design and SITC of Booster Pumping Plant 05 Nos Pump Set (03 Nos working + 01 No standby ) and 01 No spare pump setin store for boosting pumping head upto 5.0 mtr withdischarge capacity 30.0 cum/hrs, complete in all respect with its all required accessories such as D/F Pipe, Tee, Bend, Common Header,Actuated Valves, Pressure transmitter, VFD Panel etc. for each pump set Compatible to SCADA/Automation system for smooth operation of pumpsas per requirement of water supply in DMA-1 & DMA-2/ As per instructions of engineer incharge. |
| 1372 | Supply, Installation and Commissioning of automatic servo voltage Stabilizer 15 KVA(Input Voltage 230V-500V)to Output Voltage 415V± 1% As per IS 9815-1994 |
| 1373 | CE & UL Certifeid PLC/RTU in IP 54 enclousure suitable to communicate with GSM based modem unit with CPU and power supply with analog and digital parameter and features as specifeid for tubewell to store and transmit data on GSM backbone RTU/PLC designed with logic to transfer data at multiple stations specifeid. |
| 1374 | GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote site to control station all accessoreis included with signal enhancer antenna made for pumping plant internet charges as specifeid |
| 1375 | Providing, lowering, laying, aligning, fixing in position jointing in pipeline of 300 mm dia D/F DI Plunger valve (Flow Control Valve) PN 1.0 class with electrical actuator suitable for SCADA compatibility complete (including jointing & jointing material) including all material, labour, testing and commissioning as per Technical Specification & as per direction of engineer. |
| 1376 | Designing, Supplying, Installing, commissioning & testing of Pressure Transmitter Battery Fitted CE marked with following technical parameters and Interfacing with PLC module alongwith data communication with SCADA System including Mounting arrangement. Output 4-20 mA / HARTPower supply - 24V DC Display - 4\" LEDAccuracy - +/- 0.1 %of full scale or better Enclosure- IP 68 All arrangements Shall be in MS Fabricated Cabin/Enclosure Mounted on Ground or Wall. |
| 1377 | SITC of UPS of suitable capacity (3 KVA) for operation ofactuators installed at outlet line, in case of power failure at the time of distribution water supply with cabinet casing and required cabling work Upto 8 Hrs backup for Booster pumping Plant. |
| 1378 | Repairing of electrical equipments Laptop,Desktop, printer and electrical wirnung of office with all labour material T&P etc complete.(Details attached in tender document or provided at site) |
| 1379 | DMA Equipment OHT Outlet Zone - I |
| 1380 | Providing, lowering, laying, aligning, fixing in position jointing in pipeline of 350 mm dia D/F DI Plunger valve (Flow Control Valve) PN 1.0 class with electrical actuator suitable for SCADA compatibility complete (including jointing & jointing material) including all material, labour, testing and commissioning as per Technical Specification & as per direction of engineer. |
| 1381 | Designing, Supplying, Installing, commissioning & testing of Pressure Transmitter Battery Fitted CE marked with following technical parameters and Interfacing with PLC module alongwith data communication with SCADA System including Mounting arrangement. Output 4-20 mA / HARTPower supply - 24V DC Display - 4\" LEDAccuracy - +/- 0.1 %of full scale or better Enclosure- IP 68 All arrangements Shall be in MS Fabricated Cabin/Enclosure Mounted on Ground or Wall. |
| 1382 | SITC of CE/UL certifeid Electromagnetic Flowmeters for DMA -1 line size 350 mmdia |
| 1383 | SITC of UPS of suitable capacity (5 KVA) for operation ofactuators installed at outlet line, in case of power failure at the time of distribution water supply with cabinet casing and required cabling work. Upto 8 Hrs backup. |
| 1384 | Providing, lowering, laying, aligning, fixing in position jointing in pipeline of 300 mm dia D/F DI Plunger valve (Flow Control Valve) PN 1.0 class with electrical actuator suitable for SCADA compatibility complete (including jointing & jointing material) including all material, labour, testing and commissioning as per Technical Specification & as per direction of engineer. |
| 1385 | Designing, Supplying, Installing, commissioning & testing of Pressure Transmitter Battery Fitted CE marked with following technical parameters and Interfacing with PLC module alongwith data communication with SCADA System including Mounting arrangement. Output 4-20 mA / HARTPower supply - 24V DC Display - 4\" LEDAccuracy - +/- 0.1 %of full scale or better Enclosure- IP 68 All arrangements Shall be in MS Fabricated Cabin/Enclosure Mounted on Ground or Wall. |
| 1386 | SITC of CE/UL certifeid Electromagnetic Flowmeters for DMA -2 line size 300 mmdia |
| 1387 | SITC of UPS of suitable capacity (3 KVA) for operation ofactuators installed at outlet line, in case of power failure at the time of distribution water supply with cabinet casing and required cabling work. Upto 8 Hrs backup. |
| 1388 | DMA Equipment OHT Outlet Zone - II |
| 1389 | Providing, lowering, laying, aligning, fixing in position jointing in pipeline of 250 mm dia D/F DI Plunger valve (Flow Control Valve) PN 1.0 class with electrical actuator suitable for SCADA compatibility complete (including jointing & jointing material) including all material, labour, testing and commissioning as per Technical Specification & as per direction of engineer. |
| 1390 | Designing, Supplying, Installing, commissioning & testing of Pressure Transmitter Battery Fitted CE marked with following technical parameters and Interfacing with PLC module alongwith data communication with SCADA System including Mounting arrangement. Output 4-20 mA / HARTPower supply - 24V DC Display - 4\" LEDAccuracy - +/- 0.1 %of full scale or better Enclosure- IP 68 All arrangements Shall be in MS Fabricated Cabin/Enclosure Mounted on Ground or Wall. |
| 1391 | SITC of CE/UL certifeid Electromagnetic Flowmeters for DMA -1 line size 250 mmdia |
| 1392 | SITC of UPS of suitable capacity (3 KVA) for operation ofactuators installed at outlet line, in case of power failure at the time of distribution water supply with cabinet casing and required cabling work. Upto 8 Hrs backup. |
| 1393 | Providing, lowering, laying, aligning, fixing in position jointing in pipeline of 350 mm dia D/F DI Plunger valve (Flow Control Valve) PN 1.0 class with electrical actuator suitable for SCADA compatibility complete (including jointing & jointing material) including all material, labour, testing and commissioning as per Technical Specification & as per direction of engineer. |
| 1394 | Designing, Supplying, Installing, commissioning & testing of Pressure Transmitter Battery Fitted CE marked with following technical parameters and Interfacing with PLC module alongwith data communication with SCADA System including Mounting arrangement. Output 4-20 mA / HARTPower supply - 24V DC Display - 4\" LEDAccuracy - +/- 0.1 %of full scale or better Enclosure- IP 68 All arrangements Shall be in MS Fabricated Cabin/Enclosure Mounted on Ground or Wall. |
| 1395 | SITC of CE/UL certifeid Electromagnetic Flowmeters for DMA -2 line size 350 mmdia |
| 1396 | SITC of UPS of suitable capacity (5 KVA) for operation ofactuators installed at outlet line, in case of power failure at the time of distribution water supply with cabinet casing and required cabling work. Upto 8 Hrs backup. |
| 1397 | DMA Equipment OHT Outlet Zone - III |
| 1398 | Providing, lowering, laying, aligning, fixing in position jointing in pipeline of 350 mm dia D/F DI Plunger valve (Flow Control Valve) PN 1.0 class with electrical actuator suitable for SCADA compatibility complete (including jointing & jointing material) including all material, labour, testing and commissioning as per Technical Specification & as per direction of engineer. |
| 1399 | Designing, Supplying, Installing, commissioning & testing of Pressure Transmitter Battery Fitted CE marked with following technical parameters and Interfacing with PLC module alongwith data communication with SCADA System including Mounting arrangement. Output 4-20 mA / HARTPower supply - 24V DC Display - 4\" LEDAccuracy - +/- 0.1 %of full scale or better Enclosure- IP 68 All arrangements Shall be in MS Fabricated Cabin/Enclosure Mounted on Ground or Wall. |
| 1400 | SITC of CE/UL certifeid Electromagnetic Flowmeters for DMA -1 line size 350 mmdia |
| 1401 | SITC of UPS of suitable capacity (5 KVA) for operation ofactuators installed at outlet line, in case of power failure at the time of distribution water supply with cabinet casing and required cabling work. Upto 8 Hrs backup. |
| 1402 | Providing, lowering, laying, aligning, fixing in position jointing in pipeline of 400 mm dia D/F DI Plunger valve (Flow Control Valve) PN 1.0 class with electrical actuator suitable for SCADA compatibility complete (including jointing & jointing material) including all material, labour, testing and commissioning as per Technical Specification & as per direction of engineer. |
| 1403 | Designing, Supplying, Installing, commissioning & testing of Pressure Transmitter Battery Fitted CE marked with following technical parameters and Interfacing with PLC module alongwith data communication with SCADA System including Mounting arrangement. Output 4-20 mA / HARTPower supply - 24V DC Display - 4\" LEDAccuracy - +/- 0.1 %of full scale or better Enclosure- IP 68 All arrangements Shall be in MS Fabricated Cabin/Enclosure Mounted on Ground or Wall. |
| 1404 | SITC of CE/UL certifeid Electromagnetic Flowmeters for DMA -2 line size 400 mmdia |
| 1405 | SITC of UPS of suitable capacity (5 KVA) for operation ofactuators installed at outlet line, in case of power failure at the time of distribution water supply with cabinet casing and required cabling work. Upto 8 Hrs backup. |
| 1406 | Repairing of Divisional store E&M Godown no 1 including repairing of old existing structure, fixing of new sanitary fittings, replacing of old furniture developement of pathways with all labour material T&P etc complete.(Details attached in tender document or provided at site) |
| 1407 | SCADA /AUTOMATION of Tubewell for & Existing Pumping Plant Zone - I & II |
| 1408 | CE & UL Certifeid PLC/RTU in IP 54 enclousure suitable to communicate with GSM based modem unit with CPU and power supply with analog and digital parameter and features as specifeid for tubewell to store and transmit data on GSM backbone RTU/PLC designed with logic to transfer data at multiple stations specifeid. |
| 1409 | GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote site to control station all accessoreis included with signal enhancer antenna made for pumping plant internet charges as specifeid |
| 1410 | SCADA /AUTOMATION of Tubewell for & Existing Pumping Plant Zone - III |
| 1411 | CE & UL Certifeid PLC/RTU in IP 54 enclousure suitable to communicate with GSM based modem unit with CPU and power supply with analog and digital parameter and features as specifeid for tubewell to store and transmit data on GSM backbone RTU/PLC designed with logic to transfer data at multiple stations specifeid. |
| 1412 | GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote site to control station all accessoreis included with signal enhancer antenna made for pumping plant internet charges as specifeid |
| 1413 | SCADA /AUTOMATION of Tubewell for & Existing Pumping Plant Zone - V |
| 1414 | CE & UL Certifeid PLC/RTU in IP 54 enclousure suitable to communicate with GSM based modem unit with CPU and power supply with analog and digital parameter and features as specifeid for tubewell to store and transmit data on GSM backbone RTU/PLC designed with logic to transfer data at multiple stations specifeid. |
| 1415 | GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote site to control station all accessoreis included with signal enhancer antenna made for pumping plant internet charges as specifeid |
| 1416 | SCADA /AUTOMATION of Tubewell for & Existing Pumping Plant Zone - VI |
| 1417 | CE/UL certifeid Radar Type level transmitter for OHT. |
| 1418 | Actuator with valve of 350 mm dia size forOHT of kashiram awas existing OHT |
| 1419 | CE/UL certifeid Electromagnetic Flowmeters for OHT.size 350 mm |
| 1420 | Installation, commissioning & testing trial of Level Transmitter |
| 1421 | Installation, commissioning & testing trial of Flowmeters. |
| 1422 | Actuator Panel for OHT Actuated Valve |
| 1423 | SITC of UPS of suitable capacity (3 KVA) for operation ofactuators installed at outlet line, in case of power failure at the time of distribution water supply with cabinet casing and required cabling work. Upto 8 Hrs backup. |
| 1424 | Local Control Station |
| 1425 | Desktop/PC with i5/i7 processor for as per spec mentioned in tachnical bid documents. |
| 1426 | CE/UL Certified 3 KVA UPS with batteries as perspec mentioned in tachnical bid documents. |
| 1427 | Syncronization of scada work of new tubewells to existing scada software includingFull development of required TAGS SCADA Software at LCS as per spec mentioned in tachnical bid documents. |
| 1428 | Upgradation of existing CE/UL certified local control room PLC panel with redundant CPU & power supply at LCS. Surge protector,Ethernet communication protection,Industrial grade Ethernet Switch. |
| 1429 | Running of existing GSM based wireless/Broadband/Equivalent communication system for PLC capable to transfer & receive data & gather data form remote sites to control station,All accessories include signal enhancer antenna along with running expences till DLP. |
| 1430 | CE/UL certified Firewall for network protection. |
| 1431 | Local video screen ultra HD 4K LED smart display of size 65 \" |
| 1432 | Canon/hp Laser printer1018 or equivalent |
| 1433 | Redevelpoment/Reinstatement of LCS Room with store,washroom including required furniture,ac of 1.5 ton/as required ,internal wiring,PVC panelling of walls/false ceiling work etc. |
| 1434 | Security Survelliance IP Camera with required hard drive to store data of atleast 15 Days |
| 1435 | Charges for Trial and Run Period for all above istallation on all equipment of Tubewell, OHT, SCADA, LCS Zone - I |
| 1436 | Charges for 3 month Trial and Run Period for expenditure of Sodium hypochloride Solution. |
| 1437 | Skilled computer operater to operating pumping plant in LCS Room for 8 hours shift per day 3 shift. |
| 1438 | Chowkidar for watch&ward for LCS Room 8 hours shift per day 3 shift . |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail