|
| 1 | Dismantling floor hearth or wall tilling/stone slab including cement mortar bedding (but not backing coat) removing serviceable tiles to store & rubbish off the premises complete all as specified and directed. |
| 2 | Material and labour for providing, 25 mm thick cement concrete 1:2:4, type B1 using 20mm graded stone aggregate as in floor even and fair finish complete all as specified and directed. |
| 3 | Material and labour for glazed ceramic tiles (coloured) 450x300x7mm/600x300x7mm on vertical surfaces set, jointed in neat cement slurry and pointed with white cement mixed with pigment to match over and including 10mm thick rendering CM 1:4 complete all as specified and directed. |
| 4 | Material and labour for vitrified ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/skiting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including 15mm thick screed bed CM 1:6 complete all as specified and directed.. |
| 5 | Material and labour for non skid ceramic tile (coloured) non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/skiting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed CM 1:6 complete all as specified and directed.. |
| 6 | Material and labour for 16 to 18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window grill, cooking platforms with moulded edges and like with and including 20mm thick screed bed incement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 7 | Material and labour for chamfering half rounding of edges ,corners all around of cudappa/ granite slab as in platform &polishing complete all as specified and directed. |
| 8 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in stone, concrete wall and slabs complete all as specified and directed. |
| 9 | Taking up or down steel tubing 15 mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 10 | Taking up or down steel tubing 20mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 11 | Supply and fixing for 15 mm bore GI tubing medium grade to walls, ceiling or laid in floors complete all as specified and directed. |
| 12 | Supply and fixing for 20 mm bore GI tubing medium grade to walls, ceiling or laid in floors complete all as specified and directed. |
| 13 | Supply and fixing in repair 15mm dia CP bib taps, fancy, cast copper alloy with crutch or butterfly handle, screwed for iron pipefixed complete all as specified and directed.. |
| 14 | Supply and fixing in repair 15 mm diaCP fancy type stop/angle/concealed valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixedcomplete all as specified and directed. |
| 15 | Supply and fixing in repair 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred \"HOT or COLD\" with long screwed sunk and fly nuts screwed for iron pipe complete all as specified and directed. |
| 16 | Supply and fixing forPVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 17 | Supply and fixing for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 4mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 18 | Supply and fixing in repair brass chromium plated shower rose 125mm size complete all as specified and directed. |
| 19 | Supply and fixing in repair toilet paper holder, viperous China, coloured, box typefixed to walls with chromium plated (CP) brass screwscomplete all as specified and directed. |
| 20 | Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 21 | Supply and fixing in repair tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 22 | Supply and fixing in repair PVC valve less symphonic action type flushing cistern low level white, dual flush,with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32 mm dia PVC long bend for squatt pattern etc, set with concrete and making good to floor complete all as specified and directed. |
| 23 | Supply and fixing for vitreous China squatting pan \"Orissa\" pattern of size 580mmx440mm white with integral foot rest (excluding flushing cistern) but including PVC (SWR) \"P\" trap set in and including lime concrete completeall as specified and directed |
| 24 | Supply and fixing in repair vitreous China wash down water closet pan (pedestal pattern), white (including 6 mm dia 50 mm longfixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut) with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including PVC valveless, symphonic action type, flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets fixed in repairs with 32 mm PTMT Flush pipes to pedestal pan, including all jointscompleteall as specified and directed |
| 25 | Supply and fixing for health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completeall as specified and directed |
| 26 | Supply and fixing in repairs vitreous China wash hand basin, white, oval shape, size 550 mm x 400 mm size with brass chromium plated waste coupling/fitting32 mm dia PVC waste pipe, 32 mm bore incl a pair of cast iron bracket electing stand (300mm lomg) cutting for and pinning ends and making good disturbed surface in cement mortar 1:3 complete all as specified and directed. |
| 27 | Supply and fixing for sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm completeall as specified and directed |
| 28 | Taking down shutters exe 1 sqm but n.exc 2 sqm each completeall as specified and directed. |
| 29 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 sqm each complete all as specified anddirected. |
| 30 | Cutting holes for inserting hold fast and making good dismantled portion in CM (1:3) in brick walls, built in cement mortar or cement concrete 1:2:4 type B1 as required exc one brick but not exc two bricks complete all as specified and directed. |
| 31 | Supply and fixingfor factory made solid PVC chowkhats or frames of size 50mmX47mm made out of5mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and directed. |
| 32 | Supply and fixing for factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C\" channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 33 | Refixing shutters of any description exc 1 sqm but n exc 2 sqm each in same opening complete all as specified and directed |
| 34 | Hacking out old broken glass(any thickness, size quality or description) from wooden/steelframes or stone concrete or brick surrounds glazed with putty or fixed with walls complete all as specified and directed. |
| 35 | Supply and fixing for 4mm thick sheet glass ordinary quality fixed with silicon gel and oil putty all aroundin square n exc. 0.5 sqm in each pane complete all as specified and directed. |
| 36 | Supply and fixing for 4 mm thick figured sheet glass ordinary quality fixed with silicon gel and oil putty all aroundoil putty in square n exc. 0.5sq m in each pane complete all as specified and directed. |
| 37 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sqm n exc 4.0 sqm each complete all as specified and directed. |
| 38 | Supply and fixing for 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified anddirected. |
| 39 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed |
| 40 | Supply and fixing for 18mm thick block board (both sides laminated with and including 0.80mm thick prelaminated of shade as approved) of interior grade, type- II /prelaminated complete fitted in cup board shutterscomplete all as specified and directed. |
| 41 | Supply and fixing for 12mm thickblock board (both sides laminated with and including 0.80mm thick prelaminated of shade as approved) of interior grade, type-II/prelaminatedcomplete fitted as per site requirement complete all as specified and directed. |
| 42 | Supply and fixing for2nd class hard wood plain fillets sectional area exc. 6sqcm n.exc. 13 sqcm clean sawn, and wrought secured with nails or bradsand apply two coats synthetic enamelledpainting over a coat ofprimer coat complete all as specified and directed |
| 43 | Supply and fixing for30 mm continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed |
| 44 | Supply and fixing in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 45 | Supply and fixing for aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 250mm complete all as specified and directed |
| 46 | Supply and fixing for aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 100mm complete all as specified and directed |
| 47 | Supply and fixing for aluminium handles extruded aluminium alloy handles, fabricated type, anodised,size of handle in 100mm complete all as specified and directed |
| 48 | Supply and fixing for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of size 140mm complete all as specified and directed |
| 49 | Taking down cement plaster on brick walls including hacking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 50 | Material and labour forrendering 10 mm thick internal usingcement plaster in CM 1:6 onfair faces of brick/concrete work surfaces complete all as specified and directed. |
| 51 | Material and labour for preparing newly plastered surfaces and apply two coats of oil bound distemper over a coat of chalk whiting, white primer complete on walls complete all as specified and directed |
| 52 | Material and labour for preparation of old treated plastered surfaces of wallsby brooming down andapplying one coat of oil bound distemper complete all as specified and directed. |
| 53 | Material and labour for preparation by complete removal of existing treatment of walls and applying two of oil bound distemper over one coat of primer with 1mm thick putty complete all as specified and directed |
| 54 | Material and labour for external plastering 15mm thick on fair faces of concrete surfaces in CM (1:4) using WPC @ 3% by weight of cement complete all as specified and directed. Note : WPC shall be measured and paid for separately. |
| 55 | Supply only liquid water proofing compound complete all as specified and directed. |
| 56 | Material and labour for preparation of newly plastered surfaces of wall and apply two coats of cement paint complete all as specified and directed. |
| 57 | Material and labour for rendering 5mm thick cement plaster 1:4 onfair faces of concrete surfaces in ceiling complete all as specified and directed |
| 58 | Material and labour for three coat of white wash of old treated plastered /un plastered surface of ceilingcomplete all as specified and directed |
| 59 | Supply and fixing in repair 20mm dia harrison rails, stainless steel, chromium plated curtain rod with fixing bracket, stops, rollers complete all as specified and directed |
| 60 | Supply and fixing in repair CP grating 110 mm dia complete all as specified and directed |
| 61 | Dismantling water tanks of capacity exc500 ltrs and n exc 1000 ltrsand removing to store complete all as specified and directed |
| 62 | Supply and fixing for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 ltrs with and including 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed |
| 63 | Supply and fixing for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 ltrs with and including 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed |
