Drinking Water Supply and Sanitation Local Bodies Closing in 0 days TDR #47537860

Tender For Repair And Maintenance Of Community And Public Toilet In Pattukkottai Municipality

Issued by Local Bodies · pattukkottai, Tamil Nadu
Tender Value
7.50 Lakhs
Estimated cost
Bid Submission
19 Feb 2025
0 days left
EMD
7500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
pattukkottai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Repair And Maintenance Of Community And Public Toilet In Pattukkottai Municipality; 1 Manufacturing supplying and fixing ofMILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase ofDouble shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers. 2 Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications 3 Supply and fixing of single box type 436 W fluorescent fitting complete with electronic ballast with TW round block sonwall or ceiling with flu tube with PVC unsheathed FRLS Copper leads from terminals to the fitting 4 M-0510 PVC Screw Down Tap Heavy Type 20mm dia 5 Internal Water Supply - CP.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessaryscaffolding charges. 25mm 6 Internal Water Supply - CP.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessaryscaffolding charges. 30mm 7 Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitaryfittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. 110 mm 8 Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement 9 Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications 10 Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. 11 Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 12 Solid PVC Door Shutters using 19 Gauge 19mm MS squaretubes for styles and outer frames.15mm MS square tubesfor top, lock and bottom rails.The steel tubes shall be covered with 5mm thick solid PVC Sheets.Shutter using5mm thick solid PVC Sheets for panelling shall rigidly fixedin position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm.The over allsize of top rail,lock rail and bottom rail shall be 75mm x30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter 13 Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb 14 Supply and run of 2 of 1.5sq.mm. PVC insulated Scunsheathed FRLS copper conductor of 1100V grade on 7/ 2 0GI bearer wire for service connection mains 15 Supply and run of2 of 6 sq.mm. (84/0.3) PVCinsulated SC unsheathed FRLScopper conductor of 1100V grade in25mm dia GI pipe (Class B) bent at both ends with necessary angle iron up right and end supports for mains 16 Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V)32Aneutral link and earth link (1x1/8copper flat)on TW plank of size 375 mm x 300mm x 19mm with supportingTWreepersof1thick aneither side with paintingwithsuitableboltandnuts for fixing theTW plankonwallwithearth connection and inter connection with 7/20 PVC insulated copper wire from EBmeter tofuseunitwith1No40Amp30MA Double Pole RCD / RCCB (Higher End) with suitable necessary connection 17 White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333

BOQ

Name of Work: Reapir and maintance of Commuinity and Public toilet in Pattukkottai Municipality
Sl. No. Item Description
1Manufacturing supplying and fixing ofMILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase ofDouble shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers.
2Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications
3Supply and fixing of single box type 4\"36 W fluorescent fitting complete with electronic ballast with TW round block sonwall or ceiling with flu tube with PVC unsheathed FRLS Copper leads from terminals to the fitting
4M-0510 PVC Screw Down Tap Heavy Type 20mm dia
5Internal Water Supply - CP.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessaryscaffolding charges. 25mm
6Internal Water Supply - CP.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessaryscaffolding charges. 30mm
7Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitaryfittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. 110 mm
8Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement
9Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications
10Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors.
11Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.
12Solid PVC Door Shutters using 19 Gauge 19mm MS squaretubes for styles and outer frames.15mm MS square tubesfor top, lock and bottom rails.The steel tubes shall be covered with 5mm thick solid PVC Sheets.Shutter using5mm thick solid PVC Sheets for panelling shall rigidly fixedin position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm.The over allsize of top rail,lock rail and bottom rail shall be 75mm x30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter
13Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb
14Supply and run of 2 of 1.5sq.mm. PVC insulated Scunsheathed FRLS copper conductor of 1100V grade on 7/ 2 0GI bearer wire for service connection mains
15Supply and run of2 of 6 sq.mm. (84/0.3) PVCinsulated SC unsheathed FRLScopper conductor of 1100V grade in25mm dia GI pipe (Class \"B\") bent at both ends with necessary angle iron up right and end supports for mains
16Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V)32Aneutral link and earth link (1\"x1/8\"copper flat)on TW plank of size 375 mm x 300mm x 19mm with supportingTWreepersof1\"thick aneither side with paintingwithsuitableboltandnuts for fixing theTW plankonwallwithearth connection and inter connection with 7/20 PVC insulated copper wire from EBmeter tofuseunitwith1No40Amp30MA Double Pole RCD / RCCB (Higher End) with suitable necessary connection
17White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333

AI Tender Summary

OUR REF NO 47537860
AUTHORITY Local Bodies
TENDER VALUE 7.50 Lakhs
LAST DATE 19-02-2025
Authority
Authority Name Municipal Adminitration And Water Supply Department
Work Description Tender For Repair And Maintenance Of Community And Public Toilet In Pattukkottai Municipality; 1 Manufacturing supplying and fixing ofMILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase ofDouble shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers. 2 Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications 3 Supply and fixing of single box type 436 W fluorescent fitting complete with electronic ballast with TW round block sonwall or ceiling with flu tube with PVC unsheathed FRLS Copper leads from terminals to the fitting 4 M-0510 PVC Screw Down Tap Heavy Type 20mm dia 5 Internal Water Supply - CP.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessaryscaffolding charges. 25mm 6 Internal Water Supply - CP.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessaryscaffolding charges. 30mm 7 Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitaryfittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. 110 mm 8 Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement 9 Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications 10 Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. 11 Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 12 Solid PVC Door Shutters using 19 Gauge 19mm MS squaretubes for styles and outer frames.15mm MS square tubesfor top, lock and bottom rails.The steel tubes shall be covered with 5mm thick solid PVC Sheets.Shutter using5mm thick solid PVC Sheets for panelling shall rigidly fixedin position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm.The over allsize of top rail,lock rail and bottom rail shall be 75mm x30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter 13 Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb 14 Supply and run of 2 of 1.5sq.mm. PVC insulated Scunsheathed FRLS copper conductor of 1100V grade on 7/ 2 0GI bearer wire for service connection mains 15 Supply and run of2 of 6 sq.mm. (84/0.3) PVCinsulated SC unsheathed FRLScopper conductor of 1100V grade in25mm dia GI pipe (Class B) bent at both ends with necessary angle iron up right and end supports for mains 16 Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V)32Aneutral link and earth link (1x1/8copper flat)on TW plank of size 375 mm x 300mm x 19mm with supportingTWreepersof1thick aneither side with paintingwithsuitableboltandnuts for fixing theTW plankonwallwithearth connection and inter connection with 7/20 PVC insulated copper wire from EBmeter tofuseunitwith1No40Amp30MA Double Pole RCD / RCCB (Higher End) with suitable necessary connection 17 White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333
Basic Detail
Tender No ROC NO 3847/2023/E1
Bidding Type Tender
Location
City pattukkottai
State Tamil Nadu
Key Dates
Publish Date 03 Feb 2025
Submission Date 19 Feb 2025
Open Date 19 Feb 2025
Finance
Tender Value 7.50 Lakhs
Tender Fee Ref. Documents
EMD 7500
Exemption Not Available
Document List
BOQ_621929.xls
Tendernotice_1.pdf
1274ca80-d9ec-4629-b2d2-d6ccfbf9db4d.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 03, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 19, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 19, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
xls

BOQ_621929.xls

pdf

Tendernotice_1.pdf

html

1274ca80-d9ec-4629-b2d2-d6ccfbf9db4d.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders