|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 2 | Earthwork in excavation by mechanical means (Hydraulic Excavator) by Mechanical means |
| 3 | Earthwork in excavation by mechanical means (Hydraulic Excavator) by Mechanical means in hard rock Blasting prohibited |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering ‐ All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone‐III) : 8 graded stone aggregate 40 mm nominal size). |
| 5 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete |
| 6 | Providing & Laying in position specific grade of reinforced cement concrete excluding cost of centering shuttering finishing & reinforcement all works upto plinth level. 1:1.5:3(1cement:1.5sandzone-III:3Aggregate20mm graded |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo‐ Mechanically Treated bars of grade Fe‐500D or more. |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 9 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concreteFoundations, footings, bases of columns, etc. for mass concrete |
| 11 | Structural Steel work in Single Section fixed with or Without Connecting plates including cutting hoisting fixing in position and applying a primer coat of approved steel primer all complete. |
| 12 | Providing and fixing GI chain link fabric fencing of required width in mesh size 50mmX50mm including strengthening with 2 mm dia wire or nuts bolts and washers as required complete as per directions of engineer Incharge, Made up of GI wire of 4mm PVC coated to achieve outer dia not less than 5 mm in required colour and shade |
| 13 | Excavating holes more than 0.10cum and 0.5 including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth including consolidateing each deposit layer by ramming watering etc,disposing of surplus excavated soil as directed within a lead of 50 m and lift upto 1.5m (Hard Rock Blasting Prohibited) |
| 14 | Providing & Applying Synthetic Enamel Paint of approved brand and manufacturer to give required colour |
| 15 | colour washing with lime |
| 16 | Providing & Fixing of J-bolts (0.600m long) |
| 17 | Supply, Installation, Testing and commissioning of LT Panel suitable for 415 V (Nominal ), 3 Phase 4 wire, 50 Hz, AC Supply totally enclosed type with free standing floor mounted dust and vermin proof outdoor type fabricated from 2mm CRCA sheet steel complete with 200A busbars, ammeter, voltmeter, indicating lamps, etc , interconnections with suitable size of copper leads/ solid aluminium strips/rodand having MCCB of 200A rating along with any other suitable MCBs required. The system should have 1 incoming with two outgoings.Two Maintenance free chemical type GI earthing of the panel shall also be done along with 25mm x 3mm HI Earthing Strip. |
| 18 | Supplying, installing,testingand commissioning of ABC Powder 4 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B,Can Construction : Deep drawn & Co2 Mig welded, Valve Construction :Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006 |
