|
| 1 | Providing And Placing of Executive Main Tablewith Drawers on Both the Side of TableSize - 1500 x 750 x 743mm. :Theunderstructure is in prelam panels, made with PLT boards. ▪ 2-Drawer and 3-Drawer storage units with differentcombinations to support Tops, made with 25mmPLT boards of different colours. ▪ Modesty and back panels, made with 18mm PLT boards. ▪ The Pedestals/Storages are fitted with necessary LocksB) PLT Board Tops (Straight Edges):Made of 25mm thick MDF-one side laminate board with 0.4mm PVC membrane pressed on to tops. ▪ The top has Duck nose and half round profiles edges. ▪ The top is made in only one finish: European Ash.Approved Furniture Make- Haworth/Herman Miller/Godrej/Knoll (Greenguard/BIFMA Certified Co.)Design as approved by Engineer-In-charge. |
| 2 | Providing And Placing of Executive Main Table :The Work Top shall be of size - 1200 x 600 mm understructure shall be in prelam panels, made with PLT boards. ▪1-Drawer & cupboard storage units with different combinations to support Tops, made with 25mmPLT boards of different colours. ▪ Modesty and back panels, made with 18mm PLT boards. ▪ The Pedestals/Storages are fitted with necessary LocksB) PLT Board Tops (Straight Edges):Made of 25mm thick MDF-one side laminate board with 0.4mm PVC membrane pressed on to tops. ▪ The top has Duck nose and half round profiles edges. ▪ The top is made in only one finish: European Ash.Approved Furniture Make- Haworth/Herman Miller/Godrej/Knoll (Greenguard/BIFMA Certified Co.)Design as approved by Engineer-In-charge. |
| 3 | Providing And Placing of Leatherrite Revolving full BACK CHAIR: SEAT/BACK ASSEMBLY: The back is made up of 1.2±0.1cm. thick hot- pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with Leatherite upholstery covers and mouldedPolyurethane foam. The back foam is designed with contoured foam lumbar support. Theseat has extra thick foam on front edge to give comfort to popliteal area.*FULL BACK SIZE : 52.0 cm.(W) x 69.5 cm. (H), *SEAT SIZE : 54.0 cm. (W) x 51.5 cm. (D),HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression.ARMRESTS: The adjustable armrest is designed with the following features : · Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon. · Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type. · 3 position locking with anti shock mechanism.· Tilt tension adjustment. Over all Size - 761 Wx 761 D x 1015 -1115 H mm. Approved Furniture Make- Haworth/Herman Miller/Godrej/Knoll (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge |
| 4 | Providing And Placing OF STORAGE UNIT: It should have multi bend construction with interlocking design and full length over lapping doors and sides. It should have three way bolting mechanism. All steel components should undergo eight tank anti rust treatment and oven baked epoxy polyester powder coated with 50-60 dry film thickness. The CRCA steel sheet used for the body is of 20 SWG / guage,as per IS-513 1994. It has 5 shelves made of 22 SWG / guage CRCA steel sheet. It has six lever Mazak Zinc Plated Godrej Lock. It has scratch hardness of 3 Kgs as BS-3900 part E2 1970, IS-101. It sustains salt spray test of 1000 hrs. as per IS 101. It should have 4 shelves made of 0.8 mm thick CRCA steel sheet. It should have six lever Mazak Zinc Plated Godrej Lock. It should sustain salt spray test of 1000 hrs. as per IS 101. Overall size: 198.0 cm (H) x 91.5 cm (W) x 48.5S cm (D).Approved Furniture Make- Haworth/Herman Miller/Godrej/Knoll (Greenguard/BIFMA Certified Co.)Design as approved by Engineer- In-charge. |
| 5 | Providing And Placing of OFFICE TABLE : The Main Table should be of Size -1200 x 600 x 750. The primary work surface should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Softclosing access flap with in-BACK UNITild power box are provided on work surface for wire management Modesty Panel should be made of 25mm thickpre-laminate twin board confirming to IS-14587:1990 edge banded with matching 2mm thick PVC liping. Under structure should bemade of 25mm thickpre-laminate twin board E1-P2 grade and approved shade confirming to IS-14587:1990 edge banded with matching 2mm thick PVC liping Hinge Door Storage should bemade of 25mm thickpre-laminate twin board E1-P2 grade and approved shade confirming to IS-14587:1990 edge banded with matching 2mm thick PVC liping. Handle should be provided for easy opening and storage is provided with Cam lock for security. Approved Furniture Make- Haworth/Herman Miller/Godrej/Knoll (Greenguard LEVEL/BIFMA Certified Co.)Design as approved by Engineer-In-charge. |
| 6 | Providing And Placing of Revolving Mid back Chair : 1. SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2±0.1cm. thick hot pressed plywood upholstered with changeable fabric upholstery covers and moulded Polyurethane Foam, together with moulded back spine covers. The back foam is designed with contoured lumber support for extra comfort. BACK SIZE: 45.0cm.(W) X 53.0cm.(H), SEAT SIZE: 52.0cm.(W) X 48.0cm.(D). 2. POLYURETHANE FOAM: Thepolyurethane foam is moulded with density = 45 ± 2 kg/m^ and Hardness = 20 ± 2 on Hampden machine at 25% compression. 3. SEAT/BACK SPINE COVERS:The back-spine cover is injection moulded in black Co-polymer Polypropylene. The seat is covered on the underside with black Polypropylene non-woven fabric. 4. ARMREST (FIXED):The one-piece armrests are made of black integral skin polyurethane reinforced with M.S. insert with 50-70 Shore \"A\" hardness. The armrests are scratch and weather resistant. The armrest are fitted to the seat with armrest brackets made of 0.5 ± 0.05 cm. thk. HR steel. 5. PERMANENT CONTACT MECHANISM: The permanent contactmechanism is designed with the following features: • 360° revolving type. • 14° ±2°maximum back-tilt only.• Upright position locking. • Tilt tension adjustment. 6. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. 7. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. 8. PEDESTAL ASSY: The pedestal is fabricated from 0.2 ± 0.02 cm thick HR sheet (IS : DD 1079 / HR ), powder coated ( DFT 40-60 microns ) and fitted with an injection moulded black Polypropylene hub cap and 5 nos. twin wheel castors. The pedestal is 60.0 ±0.5cm. pitch-centre dia. (70.0±1.0cm. with castors). 9. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon Approved Furniture Make- Haworth/Herman Miller/Godrej/Knoll(Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In- charge. |
| 7 | Providing And Placing OF SMALL STORAGE UNIT: It should have multi bend construction with interlocking design and over lapping doors and sides. It should have three way bolting mechanism. All steel components should undergo eight tank anti rust treatment and oven baked epoxy polyester powder coated with 50-60 dry film thickness. The CRCA steel sheet used for the body is of 20 SWG / guage,as per IS-513 1994. It has 5 shelves made of 22 SWG / guage CRCA steel sheet. It has six lever Mazak Zinc Plated Godrej Lock. It has scratch hardness of 3 Kgs as BS-3900 part E2 1970, IS-101. It sustains salt spray test of 1000 hrs. as per IS 101. It should have 2 shelves made of 0.8 mm thick CRCA steel sheet. It should have six lever Mazak Zinc Plated Godrej Lock. It should sustain salt spray test of 1000 hrs. as per IS 101. Overall size: 126.0 cm (H) x 76.5 cm (W) x 44.0 cm (D).Approved Furniture Make- Haworth/Herman Miller/Godrej/Knoll (Greenguard/BIFMA Certified Co.)Design as approved by Engineer- In-charge. |
| 8 | Providing& Placing of Modular steel Almirah With Drawer: The modular steel bodyalmirah with Wooden doors should have base unit of size - 450 W x 1900 H x 550 D mm & 2 no. Addon body of size - 900 W x 1900 H x 550 D mm.having Overhead unit of size - base unit of size - 450 W x 900 H x 550 D mm & 2 no. Addon body of size - 900 W x 900 H x 550 D mm The body shall be aesthetically appealing plain, made from combination of dent resistance 0.5mm & CRCA 0.8 mm. The appealing doors should be compositely made from MDF Honeycomb and decorative laminate withwooden design finish on both sides and all edges shall be edge banded with 2mm thick PVC lipping Hanging rod shall be 1.0mm thick MS ERW oblong tube and legs should be fitted with screw type leveler. All MS sheet metal and metal frame components shall be powder coated with epoxy polyster powder to the thickness of 50-60microns. Both Base & Addon unit should consist of a lockable Drawer unit. High quality hardware should be used like screw, washer, shelf supporters, lock, Door hinges, Bumper etc. Design as per approved by Technical Commiitee/Engineer Incharge . Make-Godrej/Herman Miller/Haworth |
| 9 | Providing& Placing of Modular steel Almirah With Drawer: The modular steel bodyalmirah with Steel doors should have base unit of size - 450 W x 1900 H x 550 D mm, 600 W x 1900 H x 550 D mm & 2 no. Addon body of size - 900 W x 1900 H x 550 D mm. The body shall be aesthetically appealing plain, made from combination of dent resistance 0.5mm & CRCA 0.8 mm. The appealing doors should be compositely made from MDF Honeycomb and decorative laminate withwooden design finish on both sides and all edges shall be edge banded with 2mm thick PVC lipping Hanging rod shall be 1.0mm thick MS ERW oblong tube and legs should be fitted with screw type leveler. All MS sheet metal and metal frame components shall be powder coated with epoxy polyster powder to the thickness of 50-60microns. Both Base & Addon unit should consist of a lockable Drawer unit. High quality hardware should be used like screw, washer, shelf supporters, lock, Door hinges, Bumper etc. Design as per approved by Technical Commiitee/Engineer Incharge . Make- Godrej/Herman Miller/Haworth |
| 10 | Providing& Placing of Modular Overhead Unit: The modular steel bodyOverhead unit with Steel doors should have base unit of size - 600 W x 900 H x 550 D mm & 2 no. Addon body of size - 900 W x 900 H x 550 D mm The body shall be aesthetically appealing plain, made from combination of dent resistance 0.5mm & CRCA 0.8 mm. The appealing doors should be compositely made from MDF Honeycomb and decorative laminate withwooden design finish on both sides and all edges shall be edge banded with 2mm thick PVC lipping Hanging rod shall be 1.0mm thick MS ERW oblong tube and legs should be fitted with screw type leveler. All MS sheet metal and metal frame components shall be powder coated with epoxy polyster powder to the thickness of 50-60microns. Both Base & Addon unit should consist of a lockable Drawer unit. High quality hardware should be used like screw, washer, shelf supporters, lock, Door hinges, Bumper etc. Design as per approved by Technical Commiitee/Engineer Incharge . Make-Godrej/Herman Miller/Haworth |
| 11 | Providing And Placing of Meeting Table : Work top to be made up of 25mm Thick Pre-laminated twin boardconforming to IS•14587:1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Soft closing dual access flap provided for access to power supply and data cables.The Under- structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics.The product has a knock-down construction. A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc).Overall size - 4200 x 1500 x 740mm.Furniture Make-Godrej (Greenguard /GRIHA/BIFMA Level Certified Company.) Design as approved by Engineer-In- charge. |
| 12 | Providing And Placing of Executive Premium 2 Seater Sofa: The 2 Seater sofa with Upholstery Fabric PVCThickness : 1 mm. Frame Material shall be Combination of plywood and pine Wood. Plywood thickness : 12 mm (moisture resistance and termite free) Pinewood cross section ( without knots).Moisture content : 10 -12 %. Seat FoamSlab stock foam , Density : Base 28 kg/m3 and super soft 32 kg/m3 at top .Back:Material : Slab stock foam, Density : Super soft foam of 32 kg/m3 .Mechanism at Headrest : Hittech make which can be adjusted at three levels . Webbing:Elastic belt with pocket spring of diameter 2mm .Legs : MS pipe with metallic powder coated Approx Size (in mm) : 1520(W) x 840(D) x 750(h).Approved Furniture Make- Godrej (GRIHA/Greenguard/BIFMA Certified Co.)Design as approved by Engineer-In-charge. |
| 13 | Providing And Placing ofEXECUTIVE VISITOR FIXED CHAIR: The chair should be of size 60.9 (W) x 64.2 (D) 98.2cm cushioned seat is to be made of injection molded plastic outer & inner. Plastic inner shall be upholstered with leatherette and moulded high resilience ( H R) Polyurethane foam of density 45+/-2kg/m compression. Seat Size should be47.0 cm(W) x 48.0cm (D).The cushioned back is to be made of PU Foam with insitu molded MS E.R.WRound Tube of size 1.9+/- 0.03cm x 0.16+/-0.0128cm. duely upholstered with leatherette. Mechanism - the tubular frameshall be cantilever type& made up of 02.54+/-0.03cm x 0.2+/-0.016cm thk S.S 202 tube. The back connect to frame through chrome platedhigh pressure die cast connector piece.Furniture Make- Godrej (CII GREENPRO/ UL Greenguard Gold/GRIHA/SCS INDOOR ADVANTAGE GOLD/BIFMA Level 2 Certified Product.)Design as approved by Engineer-In-charge. |
| 14 | Providing And Placing of EXECUTIVE MAIN TABLE :The main table is of size 2400 mm (W) x 1050 mm (D) x 750 mm (H), with top thickness of 65 mm. The side table is of size 1200 mm (W) x 445 mm (D) x 660 mm (H), top thickness of 18 mm, inmatchingfinishofthemaintable.ThetopofmaintableandERUistobemadeofMediumDensityFiberBoard. Veneer with PU coating is to be pasted on this MDF. Drawer unit is to be made of MDF, Veneer to be pasted on the same and then PU coating is to be applied. Size should be W – 510 mm x D – 635 mm x H – 445 mm.Modesty panel of size 164 x 60 x 1.6 Cms thickness to be provided ( same material as of the table top). PU coating hardness should be 1.5H. ApprovedFurnitureMake- Haworth/Herman Miller/Godrej/Knoll(Greenguard/BIFMA CertifiedCo.) Design as approved by Engineer-In-charge. |
| 15 | Providing And Placing of Executive Premium 3 Seater Sofa: The 3 Seater sofa with Upholstery Fabric PVCThickness : 1 mm. Frame Material shall be Combination of plywood and pine Wood. Plywood thickness : 12 mm (moisture resistance and termite free) Pinewood cross section ( without knots).Moisture content : 10 -12 %. Seat FoamSlab stock foam , Density : Base 28 kg/m3 and super soft 32 kg/m3 at top .Back:Material : Slab stock foam, Density : Super soft foam of 32 kg/m3 .Mechanism at Headrest : Hittech make which can be adjusted at three levels . Webbing:Elastic belt with pocket spring of diameter 2mm .Legs : MS pipe with metallic powder coated Approx Size (in mm) : 1815(W) x 840(D) x 750(h).Approved Furniture Make- Godrej (GRIHA/Greenguard/BIFMA Certified Co.)Design as approved by Engineer-In-charge. |
| 16 | Providing And Placing of Premium Wing Chair : The Overall Size : Width : 90 cm Depth : 94cm Height : 109cm Understructure: Understructure is made of combination of plywood & pinewood members. Plywood is 12+1mm thk. [moisture resistance & termite proof as per IS:303] 8 pinewood are cross section [22x40] mm are without major knots & defects on the surface. 2mm cardborad is stapled on the curved inside taper / vertical 8 outer vertical surface to stick the foam. Complete understructure is made by gluing 8 stapling.Foam: Armrest foaming is done with the PU foam with density 28 kg/m3.Upholstry:upholstry is made in the dual tone colour with polyester plain fabric & leatherite option.Armrest Top Cushion:Understructure: Understructure is made of combination 12+1mm, 6+1mm thk. plywood & pinewood of 22x40mm by gluing & stapling. Powder coated MS hook of 1.2mm thk. are mounted on the back side of cushion for mounting the cushion with the body structure.Foam: Armrest top cushion is made of two layers of supersoft PU foam with density 32 kg/m3. Recron sheet of 200GSM is wrapped & glued above this foam.Upholstry: Armrest Top Cushion upholstry is made inpolyester plain & pattern fabric.Legs: Plastic PP moulded legs are used & fitted at the bottom surface with the chipboard screws. Before fixing legs, non-woven fabric is stapled on the bottom surface to cover the structure.Packet: One packet per Qty. 1No. of each SKU. Each packet contained assembled armrest without legs & hardware packet. As per drawing & specification and directed by Engineer-in-Charge.Furniture Make- Haworth/Godrej/Knoll (,ISO 13485:2016, ISO 45001:2018, ISO 9001:2015, ISO14001:2015 Certified Co.)Design as approved by Engineer-In-charge. |
| 17 | Providing And Placing of Premium 2 Seater Sofa: The 2 Seater sofa with Upholstery Fabric PVCThickness : 1 mm. Frame Material shall be Combination of plywood and pine Wood . Plywood thickness : 12 mm (moisture resistance and termite free) Pinewood cross section ( without knots) .Moisture content : 10 -12 %. Seat FoamSlab stock foam , Density : Base 28 kg/m3 and super soft 32 kg/m3 at top .Back :Material : Slab stock foam, Density : Super soft foam of 32 kg/m3.Mechanism at Headrest : Hittech make which can be adjusted at three levels . Webbing:Elastic belt with pocket spring of diameter 2mm .Legs : MS pipe with metallic powder coated Approx Size (in mm) : 1566(W) x 865(D) x 970(h). Approved Furniture Make- Haworth/Godrej/Knoll(CII GREENPRO, UL GREENGUARD,GRIHA, SCS INDOOR ADVANTAGE GOLD,,ISO 13485:2016, ISO 45001:2018, ISO 9001:2015, ISO14001:2015 Certified Co.)Design as approved byEngineer-In-charge. |
| 18 | Providing And Placing of Premium 1 Seater Sofa: Overall Size : Width: 64cmDepth : 86.5cm Height : 88.0cm Seating Height : 46cmUpholstery :Material :Fabric ,Shade :Grey , Thickness :1 mm , Weight (GSM) :575 . Frame :Material : Rubber Wood , Shade : Cherry ,Moisture content : 12 % . Foam : Material :Slab stock ,Density:Seat-24 kg/cubic m with pocketspring embedded,Back -17 kg/cubic m. Approved Furniture Make- Haworth/Godrej/Knoll(CII GREENPRO, UL GREENGUARD,GRIHA, SCS INDOOR ADVANTAGE GOLD,,ISO 13485:2016, ISO 45001:2018, ISO 9001:2015,ISO14001:2015 Certified Co.) Design as approved by Engineer-In-charge. |
| 19 | Providing And Placing of Premium 3 Seater SofaOverall Size : Width: 192.0cmDepth : 86.5cm Height : 88.0cm Seating Height : 46cm Upholstery :Material :Fabric ,Shade :Grey , Thickness :1 mm , Weight (GSM) :5 75 . Frame :Material : Rubber Wood , Shade : Cherry ,Moisture content : 12 % . Foam : Material :Slab stock ,Density:Seat-24 kg/cubic m with pocketspring embedded,Back -17 kg/cubic m. Approved Furniture Make- Haworth/Godrej/Knoll(CII GREENPRO, UL GREENGUARD,GRIHA, SCS INDOOR ADVANTAGE GOLD,,ISO 13485:2016, ISO 45001:2018, ISO 9001:2015,ISO14001:2015 Certified Co.)Design as approved by Engineer-In-charge. |
| 20 | Providing, supplying and placing of storage unit.The product shall be 900mm(W)x470mm(D)x 2000mm(H) . The construction shall be Rigid Knock Down construction .All major panels -0.7 mm thick CRCA, False side panel - 0.9 mm thick ,Bottom Shelf - 0.8 mm thick CRCAsheet .Vertical Handle sections for shutters : 0.9 mm thick CRCA sheet . CRCA D Grade as per IS -513 .The Shutters shall be PVC shutters. Also there shall be 4 adjustable shelves for 2000 H Storage unit . Uniformly DistributedLoad Capacity per each full shelf is 80 Kg maximum . For 2000 H Storage unit A4 size box file (85 W* 345 H *285 D)can be stored vertically on five shelves. The shutter opening shall be double shutters operating in oppositedirection(i.e. from right to left & left to right) giving full accessibility to inside without disturbing aisle . Locking mechanism should have cam lock through lock lever .The Locker mechanism color should be text. bond white -metal plus shutter - translucent white . Leveler shall be screw type with hex . plastic base (add in unit height min 8 mm & addtional 5 mm max for Adjustment ) finish shall be epoxy polyester powder coating to thickness of 50micron (+/- 10). Approved Furniture Make- Haworth/Godrej/Knoll(CII GREENPRO, UL GREENGUARD,GRIHA, SCS INDOOR ADVANTAGE GOLD,,ISO 13485:2016, ISO 45001:2018, ISO 9001:2015, ISO14001:2015 Certified Co.)Design as approved by Engineer-In-charge. |
