Tender For Materials Supply For Anganwadi Constructions And Other Works At Sites, Palakkad-Kerala

Materials Supply For Anganwadi Constructions And Other Works At Sites-- 1 Supplying variuos materials 2 Stone Aggregate(single size): 40 mm nominal size 3 Stone Aggregate(single size):20 mm nominal size 4 Coarse sand (zone III) 5 Portland Cement 6 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper 7 Vibrator (Needle type 40 mm) 8 Stone for masonry work 9 wall form panel 1250x500 mm 10 Corner angle 45x45x5 mm 1.50 m long 11 100 mm channel shoulder 2.5 m long 12 Double clip (bridge clip) 13 Single clip 14 M.S. Tube 40 mm dia 15 Stone Aggregate(single size): 10 mm nominal size 16 Solid blocks of size 30x20x20cm 17 Solid blocks of size 40x20x15cm 18 Structural steel such as tees, angles, channels and R.S. joists 19 Red oxide Zinc chromate primer 20 Adjustable telescopic prop 3 m (2.02-3.75m) 21 Beam clamp 300-380 mm (450-1070 mm) 22 Second class kail wood in planks 23 Second class kail wood in scantling 24 Hollock ballies 125 mm diameter 25 Adjustable span ESO+SI (2.35-3.40) 26 Twisted steel/deformed bars 27 Fine sand (zone IV) 28 Vitrified floor tile 60x60 cm 29 Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. 30 Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black 31 Mild steel tubes electric resistant or induction butt welded 32 Mild steel round bar 12 mm dia and below 33 Flats up to 10 mm in thickness 34 Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm 35 Factory made glass reinforced plastic door frame 90x45 mm i/c carriage 36 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage 37 Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm 38 Bright finished or black enameled mild steel screws 40 mm 39 Bright finished or black enameled mild steel screws 20 mm 40 Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) 41 Multi surface paint 42 Special primer (C.W) 43 Epoxy paint 44 Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers 45 Vitreous china pedestal type wate closet 46 Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) 47 Vitreous China orrisa type w.c. pan size 580 mm 48 100 mm S.C.I. trap with vent heel 49 Vitreous China flat back wash basin 630x450 mm 50 15 mm C.P.brass tap 51 C.P. brass waste 32 mm 52 C.I. bracket for wash basin and sinks 53 Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm 54 Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings 55 Polyethylene water storage tank with cover and suitable locking arrangemnet 56 PVC pipe 15 mm outer dia 10kgf/cm2 57 PVC pipe 20 mm outer dia 10 kfg/cm2 58 PVC pipe 32 mm outer dia. 10Kgf/cm2 59 PVC pipe 40 mm outer dia. 10kgf/cm2 60 PVC pipe 63 mm outer dia . 6kgf/cm2 61 PVC pipe 110 mm outer dia 6kgf/cm2 62 Mild steel tubes hot finished welded type 63 Welding by electric plant 64 Quarry Waste 65 Material 75mm Valve 66 PVC Elbow 110mm dia

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	12-02-2025	MATERIALS SUPPLY FOR ANGANWADI CONSTRUCTIONS AND OTHER WORKS AT SITES	Date	22-02-2025

INR 3304 /-

INR 50000.0 /-

Refer document