Tender For Renovation ,Reconstruction Of Toilets And A Change Room For Workers At Reep, Irel, Oscom Plant
Tender Value
26.25 Lakhs
Estimated cost
Bid Submission
07 Feb 2025
0 days left
EMD
44508
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
matikhalo → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation ,Reconstruction Of Toilets And A Change Room For Workers At Reep, Irel, Oscom Plant Renovation, Reconstruction Of Toilets And A Change Room For Workers At Reep, Irel, Oscom Plant
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete by manually/ mechanical means including disposal of material within 50 mtr. From work site as per direction of Engineer-in-Charge. |
| 2 | Demolishing Brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable materials within with in 50 mtr. from work site as per direction of Engineer-in-Charge |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10mm to 25mm |
| 4 | Earth work in excavation by (Hydraulic excavator)/manual meansin foundation trenches or drainsincluding dressing of sides and ramming of bottoms, lift upto 1.5m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within the site lead up to 50 Mtr. All kinds of soil |
| 5 | brickwork with bricks of minimum crushing strength 60kg/cm2 in foundation and plinth in cement mortar 1:6(1 cement : 6 coarse sand) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:3:6 (1 Cement : 3coarse sand : 6 graded stoneaggregate 20mm nominal size) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:1.5:3 (1 Cement : 1.5coarse sand : 3 graded stoneaggregate 20mm nominal size) |
| 8 | Providing and laying in position machine mixed and machinevibrated cement concrete ofM-20 gradereinforced cement concrete , excluding the cost of centering, shuttering and reinforcement as per direction of Engineer-in-chargefor all work up to Plinth level. |
| 9 | Reinforcement for RCC work including supplying, straightening, cutting, bending, placing in position and binding with 22Gauge MS binding wire complete including cost, conveyance, lead, lift of all materials for all types of RCC works as per drawing/specification and as directed by Engineer-in-charge at all levels –(reinforcement steel will be suppiledby contractor) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for up to floor V level :Foundations, footings, bases of columns etc. for mass concrete |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for up to floor V level :Suspended floors, roofs, landings, balconies and access platform |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for up to floor V level:Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for up to floor V level:Weather shade, Chajjas, corbels etc., including edges |
| 14 | 15 mm cement plaster on rough side of single or half brick wall with a floating coat of neat cement of mix 1:4(1 cement:4 sand) including cost and conveyance of all materials, labour, scaffolding etc. complete as directed by Engineer-in-Charge at all levels |
| 15 | 12mm cement plaster of mix1:4(1 cement : 4 sand) for fair faces including cost and conveyance of all materials, labour, scaffolding etc. complete as directed by Engineer-in-Charge at all levels |
| 16 | white washing with lime to give an even shade |
| 17 | Finishing walls with water proofing cement paint of required shade : (Two or more coats applied @ 3.84 kg/10 sqm) |
| 18 | Providing neat cement punning |
| 19 | Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer,andof required shade and colour all complete to achieve even shade and colour as per manufacturer\"s specification:Two or more coats over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre. |
| 20 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicon additives of required shade: Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 21 | providing and fixing powder coated aluminium work for windows and ventilators with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make confirming to IS: 733 and IS1285 fixed withdash fasterns of required dia and size including necessary filling up of gaps at junctions at top botteom and sides with required EPDM Rubber / neoprene gasket etc. aluminium sections shall be smooth rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, aluminium snap beading for glazing / panneling, CP brass/stainless steel screws all complete as per architectural drawings and directed by EIC (glazing, panneling and dash fasterns to be paid separetely ). minimum thickness of powder coating for powder coated aluminium shall be 50 Micron.: for fixed portion |
| 22 | For shutter of doors, windows and ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings whereevr required including the cost of EPDM rubber/ neoprene gasket required(fittings shall be paid for separtely)Anodised aluminium (powder coated aluminium (minimum thickness of powder coating 50 micron)) |
| 23 | Providing andfixing factory madesingle extruded WPCsolid door/ window/ clerestory window and other frame / chowkhatcomprising of virgin PVCpolymerof K value 58-60 (suspension Grade) , calcium carbonate and natural fiber (wood powder /rice husk / wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVCsolvent cementandscrewd with full body threaded star headedSS screwshaving minimum frame densityof 750 kg/ cum , screw withdrawl strength of 2200 N (Face)and 1100 N (Edge) , minimum compressive strength of 58 N/mm2 , modulus of elasticity900 N/mm2and resistance to spread of flames of class A category with property of being termite /borer proof,water/ moistureproof and fire retardant and fixed in position withMShold fast/lugs/SS dash fasterns of required dia and length complete as per direction of EIC (MS hold fast/lugs or SS DASH fasterners shall be paid for separetely. frame size -45x 70mm |
| 24 | Providing and fixing factory made single extruded WPC(wood polymer composite ) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (suspension grade ) , calcium carbonate and natural fibers (wood powder / rice husk/ wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms ) having minimum density of 650 kg/cum and screw withdrawl strength of 1800 N (face) and 900 N (edge ), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to be spread of flame of class A category with property of being termite /borer proof , water proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of EIC.30 MM thick |
| 25 | Supplying, providing and fixing FRP Door frames of cross section 90mmX45 mm having single rebate of suitable size to receive shutter of 30mm/25mm thickness. The laminate shall be moulded with fire resistance grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame etc. complete as per direction of EIC. |
| 26 | Providing and fixing glazing in aluminium doors, windows , ventillator shutter, partions etc. with EPDM rubber / neoprene gasket etc. complte as per the architectural drawings and the direction of EIC. With float glass panes of 4mm thickness. |
| 27 | Supplying, providing and fixing of FRP 30mm thick door (+/-2mm tolerance) paneled door shutter made out of fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels. The door to be finished with two coats of approved enamel paint. The door to be fixed with frame with 6 nos of 4 inch hingeswith help of 1.25 inch full thread CSKscrew, including all steel fittings like door handle, tower bolts, aldrops, etc. complete as per direction of EIC |
| 28 | Providing and laying anti skid Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer but not less than 8mm), of 1st quality conforming to IS : 15622 or ISO 13006 of Kajaria, Johnson & Johnson,nitco,somany makelaid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 29 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 or ISO 13006 (thickness to be specified by the manufacturer but not less than 8mm)in all colours, shades of Kajaria, Johnson & Johnson,nitco,somany make of size 300x300 mm or more, inwalls,skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 30 | Providing and laying premium quality matt finished Vitrified tiles in different sizes (thickness to be specified by manufacturer but not less than 8mm), with water absorption less than 0.08 % and a)Flexural Strength>35 N/Sqmm(b) Moh\"s Hardness>6 (c) Abrasion resistance<204mm and, of approved make of RAK,Kajaria, Johnson and Johnson make, in all colours & shade, in floor,skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.(Size of Tile 600x600 mm) |
| 31 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. With 15mm thick tegular edged light weight calcium silicate false ceiling tiles The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge |
| 32 | Supplying all material, labour and fixing and fitting of the PVC (SWR) pipe confirming to IS: 13592 both below and above ground level including jointing with adhesive of all complete. This should also include necessary earth work in excavation and filling and fixing with wall as directed by E.I.C. (110mm dia) |
| 33 | Supplying all material labour and fixing and fitting of the following PVC (SWR) and rigid PVC fitting confirming to IS: 14735 in the pipe line both below and above ground level including jointing with adhesive for rigid PVC fittings as per specification of all complete. This should also include necessary earth work in excavation and filling: (110mm dia PVC (SWR) P- trap) |
| 34 | Supplying all material labour and fixing and fitting of the following PVC (SWR) and rigid PVC fitting confirming to IS: 14735 in the pipe line both below and above ground level including jointing with adhesive for rigid PVC fittings as per specification of all complete. This should also include necessary earth work in excavation and filling: (110mm dia PVC (SWR) S- trap) |
| 35 | Providing and fixing C.P brass shower rose with 15 mm inlet : 150 mm diameter |
| 36 | Providing and fixing pvc waste pipe for sink / wash basin including P.V.Cwaste fittings complete |
| 37 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests With cisternand all fittings. |
| 38 | Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with all fittings |
| 39 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal Pan with all fittings |
| 40 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 41 | Providing and fixing PTMTBIB COCKof approved quality and colour15mm nominal bore, 86mm long weighing not less than 88grams |
| 42 | Providing and fixing PTMTSTOPCOCKof approved quality and colour15mm nominal bore, 86mm long weighing not less than 88grams |
| 43 | Providing and fixing PTMTPILLER COCKof approved quality and colour15mm nominal bore, 86mm long weighing not less than 88grams |
| 44 | Providing and fixing Chlorinated polyvinyl chloride (CPVC) Pipes ,having thermal stability for hot & cold water supply includingall CPVC plain & brass threaded fittings,and fixing the pipe with clamps at 1m spacing .This includes jointing of pipes & fittings with one step CPVC Solventcement & the cost of cutting chases and making good the same including testing of joints complete as direction of Engineer- In Charge.concealed Work -includingcutting chases and makinggood the wall with fittings20 mm nominal dia pipe |
| 45 | Providing and fixingPVClow level flushing cistern wih manually controlled device (handle lever) confirming to IS - 7231, with all fittings and fixtures complete 10 litre capacity - white |
| 46 | Providing and fixing Chlorinated Ployvinyl Chloride (CPVC ) pipes having stability for hot and cold water supply , including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00m spacing. This include jointing of pipes & fittings with one step CPVCsolvent cement and the cost of cutting chases and making good the same including testing of joints complte as per direction of EIC.Concealed work, including cutting chases and making good the walls etc with fittings. 25mm nominal dia pipes |
AI Tender Summary
Tender Timeline
Jan 31, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 07, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 08, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender