|
| 1 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed |
| 2 | Excavation over areas n.exc 1.50m deep and getting out in soft/loose soil complete all as specified and as directed |
| 3 | M&L for Rolling and consolidating formation surfaces in cutting with power roller 8-12 tonne complete all as specified and as directed |
| 4 | M&L for Moorum / red bajri filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed |
| 5 | M&L for Hard-core of gauge exc 63 mm but n.exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed. |
| 6 | M&L 100mm thick PCC 1:4:8 Type D-2 (Using 40mm graded stone aggregate) as in sub base complete all as specified and as directed. |
| 7 | M&L for 25 cm thick (or less) Cement concrete work in pavement / hard standing of flexural strength 40 Kg/ square centimetre in field, using 400 Kg of cement per Cumincluding use of form work complete all as specified and as directed. |
| 8 | M&L forming 12mm thick expansion joints in concrete slab 200mm thick, filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade `A\" complete all as specified and as directed. |
| 9 | M&L forming contraction (Dummy) joints 65mm deep 10mm wide, filled with sealing compound, grade `A\"complete all as specified and as directed. |
| 10 | M&L for finishing surface of concrete Roads, hard standing, pavings etc, brooming complete all as specified and as directed. |
| 11 | Removing excavated material (soil) n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed. |
| 12 | Supply , fabricate ,transportation &installation of Non Inflammable Porta Cabin of Size 4.000 x 4.000 x 3.050 m ht at Eves and 3.660mat Center with double skin wallusing 2 Nos 10mm thick cement bonded particle board (Bison panel or equivalent) and the cavity is fill with 30 mm thick EPS Insulationsheet and total wall thickness is 50 mm, MSBox section Frame and truss structure, Pitched Type roof and Purlin , false ceiling, doors and windows false ceiling complete all as specified (in particular specification) and as directed. |
| 13 | M&L for 10mm thick cement plaster in CM 1:6 on fair faces of brick work, surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 14 | M&L for two coats of cement base paint over a coat of primer on newly plastered surfaces including preparation of surfaces complete all as specified and directed |
| 15 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed |
| 16 | Excavating in post holes (or similar holes) each not exceeding 0.5 Cum, getting out in soft / loose soil, and removing surplus soil to a distance not exceeding 50 m and making good surface complete complete all as specified and directed. |
| 17 | M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 18 | M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 19 | S&F Rolled mild steel work conforming to Fe 290 Gde E-165 as in stanchions, posts,with flange plates, caps, bases, splices, angle brackets, cleats and other connections all as specified and directed. |
| 20 | S&F for Roof Trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing ( Beam, tee, angles, Channel or flat section) including distance pieces, cleats etcconforming to Fe 290 Gde E-165 complete all as specified and directed |
| 21 | M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of Fe 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 22 | M&L for Preparation of new or previously un treated surfaces of steel and iron surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome paint complete all as specified and directed |
| 23 | M&L for Hard core of gauge n.exc 63 mm , with broken stone or boulders , deposited, spread and levelled in layers n.exc 15 cm thick, watered and well rammed to a true surface all as specified and as directed. |
| 24 | M&L for 75 mm thick plain cement concrete 1:2:4type B-1,using 20mm graded stone aggregate as in floors , paths, pavings etc surface finished even and smooth without using extra cement all as specified and directed. |
| 25 | M&L for Brick work with sub class \"B\" old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed |
| 26 | M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 sqmm nominal cross-sectional area, single core PVC insulated (FRLS), unsheathed multistrandedcopper conductor cable 1100 Volts gradedrawn through and includingrigid non-metallic PVC concealed conduit 25mm dia medium grade and accessories ISI marked and including chases Cutting and making good surfaces, suitable modular pressed steel terminal boxes 1.6mm thick (recessed) for fixing of switches, sockets etc including 1.5 Sqmm nominal cross sectional area, single core PVC insulated (FRLS), unsheathed multistranded copper conductor cable earth continuity wire to common earth and connected to earth dolly for one light / fan/ Security light/ 5Amps Independent Socket / Bell point controlled by one switch complete all as specified and directed |
| 27 | All as per Item No. 26 above but for One 3 pin socket outlet 5 amps on same board controlled by one switch with 1.5 sqmm size cable |
| 28 | All as per Item No. 26 above but one 3 pin socket outlet, 15 amps / AC Metal Clad, controlled by one switch on independent board with 4 sqmm size cable for Phase, neutral and earth. |
| 29 | S&F of Modular Switch 5/6 Amps, 1module 1 Way complete all as specified and as directed. |
| 30 | S&F of Modular Switch 15/16 Amps, 1 Module 1 Way complete all as specified and as directed. |
| 31 | S&F of Modular Socket 5/6 Amps, 2 Module 2 and 3 pin complete all as specified and as directed. |
| 32 | S&F of Modular Socket 15/16 Amps, 2 Module 2/3 pin complete all as specified and as directed. |
| 33 | S&F of Modular Fan Regulator Step type, 2 Module 120W complete all as specified and as directed. |
| 34 | S&F of 3 Module Cover Plate with frame and Metal Flush Box complete all as specified and as directed. |
| 35 | S&F of 12 Module Cover Plate with frame and Metal Flush complete all as specified and as directed. |
| 36 | S&F of Ceiling rose, 3 plate /PVC/ polycarbonate, isolated body complete all as specified and as directed |
| 37 | S&F of LED lights fitting 1x 20W, 4 Feet 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed |
| 38 | S&F ceiling fan+D68, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cageinduction motor. complete all as specified and as directed. |
| 39 | S&FSPN DB Double door 8 way with tray for provision of MCBs, and Dolly for earth and neutral complete all as specified and as directed. |
| 40 | S&F of MCB TPN 40 Amps, 10 kA, C Curve complete all as specified and as directed. |
| 41 | S&F of MCB Single Pole 6-32 Amps, 10 kA, C Curve complete all as specified and as directed. |
| 42 | M&L Earthing complete with earth galvanized steel plate electrode 600x600x6mm buried directly in ground earth pit not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 mtr below ground level, surrounded from all sides with mixture of charcoal and common salt and electrode connected with galvanized earth lead GI wire 4 mm dia by means of bolts, check nut and washers of GI or steel, GI pipe light grade of 15 mm bore as protection pipe, GI wire of length not more than 7.5 mtr and connected to test point. GI pipe 20mm dia medium grade for watering, funnel with wire mesh, PCC pit and RCC (1:2:4) type B-1 for cover with 8 mm dia bar reinforcement both ways @ 140 c/c including excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr as shown on electrical plate No 3 of SSR 2009 complete all as specified and as directed. |
| 43 | M&L for submain wiring with two runs of single core cable FRLS PVC insulated sheathed cable 1100 volts grade 6 Sqmm copper multistranded conductor including and drawing into concealed PVC conduit of suitable size ISI marked Medium grade, fixed on/through wall, ceiling including 6 sqmm FRLS PVC insulated unsheathed multistranded for earth wire connected to earth complete all as specified and as directed. |
| 44 | Supply and install 2 Ton inverter type hi wall split units (Air conditioner) indoor and outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with 5 star rating and EER 5.2 and Outdoor condenser coilmade of Copper, outdoor fixed on wall/chajjafirmly byusing set ofbrackets, bolts, nuts washers etc. Including making of hole for liquid, discharge copper pipes anddrain pipe making good as existing. Liquid copper pipe line and dischargecopper pipe line should be firmly insulatedcomplete all as specified and as directed. |
| 45 | S&F of two pin and earth Metal clad plug and socket with MCB SP 20Amps, complete all as specified and as directed. |
| 46 | S&F sub main wiring with two runs of single core cable FRLS PVC insulated sheathed cable 1100 volts grade 4 Sqmm copper multistranded conductor including and drawing into concealed suitable size ofPVC conduit, making good with chasing, chipping, applying cement, fixed on/in wall, ceiling including 4 sqmm FRLS PVC insulated unsheathed multistranded for earth wire connected to earth completeall as specified and as directed. |
| 47 | S&F copper wounded Voltage stabilizer 5.0 kVA Capacity for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% complete all as specified and as directed. |
| 48 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of 3.5 core 35 sqmm complete all as specified and as directed. |
| 49 | M&L for Earthing complete with GI Earth Plate electrode 600x600x6mm buried directly in ground earth pit not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 mtr below ground level, surrounded from all sides with mixture of charcoal and common salt and electrode connected with GI earth lead GI earth strip of size 32x6 mm by means of nuts/bolts/ check nuts/ washers , GI pipe light grade of 40 mm bore as protection pipe, GI Strip of length not more than 7.5 mtr and connected to test point. GI pipe 20mm dia medium grade for watering, funnel with wire mesh, PCC pit and RCC (1:2:4) type B-1 for cover with 8 mm dia bar reinforcement both ways @ 140 c/c including excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr as shown on electrical plate No 3 of SSR 2009 complete all as specified and as directed. |
| 50 | S&F GI strip 32x 6 mm with Porceline / bakelite insulators and fixing screws etc. and connections are made by nuts/ bolts/ washers complete all as specified and as directed. |
| 51 | Supply, install, testing and commissioning of Sound ProofDG set 30 KVA, 3 phase 4 wire, 415 volts, 1500 RPM, 50 Hz power supply with power factor 0.8 coupled directly to alternator mounted on a common base plate complete with integral acoustic enclosure having silent features such as modular bolted construction with fabrication on imported CNC torret punch machines, nine tank treatment process with pure polyester based powder coating to ensure long life in all weather conditions and for out door application/ installation, integrated design thereby facilitating /easy handling installation & shifting of the equipment at site.The design of integral acoustic enclosure shall be any type approved by national Physical laboratory as per Central Pollution Control Board (CPCB-IV +) latest norms/ regulation with fuel tank, battery and standard accessories and PCC foundation for (acoustic enclosure also 45 CM above ground level) as recommended by manufacturer, vibration pad, sand cushioning around PCC foundation of height not less than 45cm from GL, tools and spares, as provided by manufacturer all as specified and as directed with the following specificationsNote :- Quoted rate shall includes all necessary arrangements for testing of DG set in presence of IEM & Engr-in-charge after installation of DG Set . |
| 52 | (A) ENGINE :- Water cooled diesel engine of suitable capacity to match the 30 KVA alternator under NTP conditions with provision of 10% over load for 1 hour in every 12 hours running confirming to BS-5514 / ISO 3046 Standards. Make: Greaves or as per Appendix BThe engine shall consist of following :-(i) Fly wheel (ii) Radiator, Air-to-Air After cooler, pusher fan & fan drive arrangement (iii) Dry type Air cleaner with restriction indicator(iv) Fuel injection system of make Bosch(v) Radiator fan (blower type) with guard(vi) Precision governor (mechanical type) Class A1(vii) Gear Driven Water Pump(viii) Fuel Filter(ix) Spin-on Lubricating oil filters (x) 12 V DC electrical starting system consisting of starter motor, charging alternator. (xi) Exhaust silencer heavy duty residential type(xii) First Fill of Lubricating oil (API CF4 grade, Make Greaves Maxtherm Lube or its equivalent stranded)(xiii) Sensors for Oil pressure, Coolant Temperature & level.(xiv) Exhaust piping as per manufacturer design |
| 53 | (B) Control Panel : The Control Panel is manufactured with 16 gauge sheet steel fabricated, dust & vermin proof with complete internal wiring and microprocessor based DG Set controller for both engine and alternator parameter in one console. The Control Panel consists of the following parts:(a) DSE4510 Auto Start Control Module and the DSE 4520 Auto mains failure control module or latest model.(b) MCCB of Adequate rating(c) Indicating Lamps for DG ON, Main On, Load on DG, Load on Mains, etc(d) Key switch (e) Set of current transformers and control fuses and MCBs(f) Controller shall monitor and display the engine speed, oil pressure, coolant temperature, frequency, voltage, current, power factor and fuel level, Battery voltage and modules for comprehensive engine and alternator protection. (g) Controller shall also display the array of waring, electrical trip and shutdown alarms. Provide a record of most recent fault conditions. Fault history stored in the control non volatile memory.(h) Control includes provision for service adjustment and calibration of DG control functions - Voltage, frequency selection-Configurable input and output set up-Meter calibration(j) Controller provide configurable time delay of 0-300 sec to start after remote start signal and time delay of 0-600 secs prior to shutdown after stop signal.(k) Emergency stop: Annunciate whenever an emergency stop signal is received by the control.(l) Low lube oil pressure warning and shutdown |
| 54 | (C) BRUSHLESS ALTERNATOR:-(i) Alternator coupled to engine through a flexible coupling to an indigenous alternator mounted on strong steel fabricated base frame suitable for mounting on a permanent foundation. Self Excited, self regulated Brush less Single bearing alternator shall be confirming to BS- 5000 or relevant of IS-4722 Make: Crompton/ Stamford(ii) Type: self excited self regulated with automatic voltage regulator (iii) Rating: 30 KVA at 0.8 PF lagging (iv) Speed- 1500 RPM (v) System -415 V +/- 2.5% AC 3 phase 4 wire 50 Hz.(vi) Connection - 4 wire star connected (vii) Enclosure -Screen projected drip proof (viii) Ventilation - self ventilated(ix) Insulation: class H , IP-23(D) Sub base Fuel tank 14 SWG MS sheet and capacity to hold diesel sufficient for running 08 hours at full load including (i) Level indicator on fuel tank.(ii) Drain plug(iii) Piping for fuel tank as per manufacturer design(iv) Fuel strainer. (vi) Battery : 01 Nos 12 V not less than 88 AH with mounting frame. |
| 55 | (E) AMF PANEL OUTDOOR TYPE:TheAMF Panel Outdoor type suitable for 30 KVA DG Set factory made out of CRCA Steel 3 mm thick Sheet floor mounted type and front operated type, totally enclosed dust, damp and vermin proof, all doors and joints will be suitable gasketed to form dust and vermin proof. The panel would be powder coated minimum thickness of 50 microns, stove enamelled paint finished after elaborate pre-treatment to form a long lasting characteristic. The control panel will be complete in all respect with fuses, wiring and labels etc, the following will be incorporated in the AMF Panel :- (a) HRC Fuse with fuse base, Din type 35A-06 No(b) Current transfrmer,CL-1,5 VA,200 /5A-04 No. (c) Four pole Contactor, 240 V AC, 2 NO +2 NC, of Suitable Current, AC3-02 Nos for (DG Set & Commercial). (d) Indicating Lights R ,Y,LED type, 240V AC -04 No.(e) Indicating Lights B,LED type, 240V AC -02 No. (f) Illu Push Button with elements, LED type -NO/NC-01 No.(g) Mushroom head push button, Press to lock, Turn to release-01 No. (h) KW/PF/KWH meter 96 x 96 sqmm ,3 Phase Digital type 415 V AC-01 No. (j) DC Ammeter 96 x 96 Sqmm, Digital type 0-20 A -01 No. (k) 12 V, 10 A DC Automatic Battery Charger with inbuilt trickle / boost facality-01 No(l) 4 Point Alarm Annunciator with inbuilt Hooter, Test, Accept & Reset Push button. (m) Solid state single element earth fault relay with 2 c/o contact, CTR-250/5A ,Aux supply 230V AC - 1 No. (n) AMF Controller,12 V DC - 01 No. (o) Aux relay, Coil voltage,24V DC,4C/O,14 PIN-24V DC-06 Nos(p) Thermal O/L Relay, with inbuilt SPP Feature. |
| 56 | Supply, installation, commissioning and testing of LT panel outdoor, double door type made out of CRCA Sheet of 3.15 mm thick with powder coated painting frame made out of angle iron 45 x 45 x 6 mm and four numbers of 150 Amps aluminium strips / bars duly insulated on insulators / suitable size Bakelite sheet, free space between MCB / busbar and other connection items should be provided, the space between ground to panel should be 60 cm with PCC foundation for LT Panel, LT panel should be provided with necessary locking arrangement, danger notice sticker, cable glands, internal wiring with FRLS copper wires and comprising and including the following:- |
| 57 | (A) Main Incoming(i) MCCB Four Pole 100 Amps, 16KA - 01 Nos(ii) MCB Change over with center off 4 pole, 63 Amps, - 01 No.(iii) LED Multifunctional Panel meter to measure voltage, current, frequency, power factor, kWH, etc with all connected CTs (iv)LED indicating lamps with colour Red, Yellow, Blue, Mains On, Standby On (05 Lights) - 01 Set(B) Main Outgoing(i) MCCB FP 63 Amps, 16 kA, C Curve - 02 Nos (ii) MCB DP 16 Amps, 10 kA, C Curve - 02 Nos |
| 58 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for laying of cable n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft / loose soil complete all as specified and as directed. |
| 59 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 60 | M&L for Dry Sand filling in cable trenches for protection of cables with two layers below and above cable and punned down to specified thickness complete all as specified and as directed. Note: Punned down thickness shall only be measured for payment. |
| 61 | Supplying and laying Red Clay Bricks of Class B Designation 75 for cable Protection complete all as specified and as directed. |
| 62 | Supply and fix GI pipe light grade of 40 mm dia complete with elbows, couplers, etc and with MS clamps, nuts, bots, washers etc for fixing of pipe to wall/ floor and laying in trenches for cable protection complete all as specified and as directed. |
