Tender For Repair Maintenance To Sunken Floor Treatment Internal Water Supply System Sanitary Fittings Flooring And Certain B R Works Under Age B R West
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Feb 2025
0 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jalahalli → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair Maintenance To Sunken Floor Treatment Internal Water Supply System Sanitary Fittings Flooring And Certain B R Works Under Age B R West
BOQ
| Sl. No. | Item Description |
| 1 | Treatment of the sunken floor slab comprises of the following specification and all as specifiedMake :-Dr Fixit/ M/s Sika india Pvt Ltd/ STP Ltd/ M/s Fosroc Chemicals |
| 2 | (a) Demolition of cement concrete filling of any description in sunken portion in toilet and removing debris outside MD land. |
| 3 | (b) Cleaning the sunken/ lowered portion of RCC slab surfaces (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout (WPC shall be measured and paid separately) |
| 4 | (c) Rendering of uneven surfaces with 10mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/ seepage is noticed, nozzles shall be fixed and grouting carried out. (WPC shall be measured and paid separately). |
| 5 | (d)All junctions points of side wall spout where CI/ GI pipes are passing through shall be sealed with epoxy putty. |
| 6 | (e)After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. |
| 7 | (f) Material and labourfor applying two coats of polymer modified cementious water proof coating as per manufactures instruction to bottom and vertical sides up to finished floor level+300mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. |
| 8 | (g)Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound 3% by wt of cement consumed as per manufacturers specification including rounding of corners and junctions sloping towards spout. (WPC shall be measured & paid separately). |
| 9 | (h)Material and labourfor PCC 1:5:10 type E2, n exc 150mm thick complete all as specified |
| 10 | (j) Material and labourfor PCC 1:2:4 type B0 12.5mm thick aggregate, 50mm tnick complete all as specified |
| 11 | Note :- Test the water proof area (ponding test) by filling water for at least 72 hours and tested for leakage, seepage to the entire satisfaction of GE. Test shall be done in presence of reps of Engineer-in-Charge. The treatment shall be carried out by authorised applicator of chemicals. Cost of testing is included in the unit quoted rate above. |
| 12 | Supplyonly liquid water proofing compound complete all as specified and as directed.Make:-Dr. Fixit Pidi Proof and equivalent. |
| 13 | M&L for Repair of leakage/seepage from the Nahani trap/ floor trap of kitchen/ bathroom/ washbasin of the upper Qtr, in any position at any height, complete including change of floor trap, PVC horinzontal pipe embeded in floor in bathroom or kitchen making good to the damaged portion of flooring, laying and matching of tiles in the existing flooring, complete all as specified and directed. |
| 14 | M&L for Repair of leakage/seepage from the wall/ door bend /door tee/\"Y\" junction/ \"T\" Junction of soil pipe / waste pipe/ vent pipe of kitchen/ bathroom/WC of the upper Qtr or at the ground floor Qtr including change of any damaged soil waste pipes or fittings of any shape, specification and size, making good to the damaged portion of wall with brick work in cement mortar 1:6 or cement concrete 1:2:4 and plastering to wall in CM 1:4 and finished the surfaces matching to existing wall complete to avoid the leakage/ seepage at the site of work all as specified and directed. |
| 15 | Note for item No 13 & 14:- (a)Find out main cause of leakage and take necessary steps to resolve / rectify.(b)Replace existing tiles in case leakage through NT/FT.(c)The rate also include provision of new NT/FT.(d)The unit rate is also deemed to be included for reqd bonding chemicals to arrest the leakage/seepage as directed by the manufacturer\"s specification. Make : M/s Sika Chemical, M/s Pidilite, M/s Dr Fixit |
| 16 | Supply and fixing 15mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking up or down old unserviceable steel tubing and connection complete all as specified and directed. |
| 17 | Supply and fixing 20 mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including takingup or down old unserviceable steel tubing and connection complete all as specified and directed. |
| 18 | Supply and fixing 25 mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including takingup or down old unserviceable steel tubing and connection complete all as specified and directed. |
| 19 | S&F Vitreous china squatting pan \"Orissa\" Pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete beddingfixed in repairs all as specified and as directed. |
| 20 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints of 110 mm bore fixed to wall/floor including taking down existing one complete all as specified and as directed. |
| 21 | S&F PVC bends 110mm boreincluding taking down existing one complete all as specified and as directed. |
| 22 | S&F PVC (SWR) pipes single socket in any length with rubber ring joints of 75 mm bore fixed to wallincluding taking down existing one complete all as specified and as directed. |
| 23 | S&F PVC (SWR) branch piece (single Y)75mm equal or unequal provided with access doorincluding taking down existing one complete all as specified and as directed. |
| 24 | S&F PVC bends 75mm boreincluding taking down existing one complete all as specified and as directed. |
| 25 | S&F in repairs PVC (SWR) floor trap 75mm dia of outlet pipe, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 26 | S&F in repairs Stack clamps made out of 50 mm x 5 mm flat iron and 110 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or rooffor 110 mm bore complete all as specified and directed. |
| 27 | S&F in repairs Stack clamps made out of 50 mm x 5 mm flat iron and 75 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or rooffor 75 mm bore complete all as specified and directed. |
| 28 | S&F Rotational moulded polyethelene water storage tank of500 Ltrs capacity cylindericalvertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including taking down of old unserviceable tank complete all as specified and directed. |
| 29 | S&F PVC connections 15mm size with PTMT nuts of length 600 mm including taking down existing one complete all as specified and directed. |
| 30 | S&F Wash basin vitreous china (flat back and angle back Type) size 580x400mm including taps wastechain and plug and porceline stopper but brackets including cutting for and pinning inends of brackets or erecting stand with waste pipe,fixed including taking down existing one complete as directed. |
| 31 | S&F Angular stop cock, valves high pressure screwed both ends iron pipe or for unioins 15mm dia, including taking existing one complete as directed. |
| 32 | S&F in repairPVC flush ceramic colour cistern , low level, 10 litres capacity, star white with inlet float ball valve, PVC flush pipeand handle, making proper fixing and hanging arrangementsall as specified and as directed. |
| 33 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including taking down existing one complete all as specified and as directed. |
| 34 | S&F Vitreous china wash down water closet pan (pedestal pattern), white (exluding fixing bolts,flushing cistren and flushpipe) and including seat cover for pedestal pattern complete fixed in repair, all as specified and as directed. |
| 35 | S & F in repair PVC waste pipe 32 to40mm dia and length n exc 2m for WHB/Sink/ Urinal up to floor trap and fixed complete all as specified and directed. |
| 36 | S&F in repairs of Stop Valve standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-90gms) complete all as specified and directed. |
| 37 | S&F in repairs Overhead Shower rose ø125mm (Brass Chrome Plated)complete all as specified and as directed. |
| 38 | S&F in repairs Wash hand basin table counter type 560x400x200mm vitreous china (white) with cantilever CI/Angle iron bracketsembedded in concrete block, including long shank pillar tap, Brass chromium plated waste coupling 32mm bore, Waste pipe bottle trap, complete all as specified and as directed. |
| 39 | S&F in repairs 150 mm dia round/square grating of CP with or without hole includingJointed to PVC pipe complete all as specified and directed. |
| 40 | S&F in repairs of Swivel Shower with arm of PTMT any colour and 195mm long bend of 45 degree with flange for fixed with 15mm pipe (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 41 | S & F in repairToilet paper holder box type of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 42 | Supply and fixing in repairs plastic water closet seat cover white or tinted, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinge device and including taking downexisting one complete all as directed. |
| 43 | S&F in repairs of Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 44 | Taking down steel tubing 20mm bore and connections including cleaning and refixing of old GI tubing 20mm bore including connections in new or old position (wall, ceiling & floor)complete all as specified and as directed. Note :- The unit rate quoted is deemed to include for all fittings required for re-connection. |
| 45 | Taking down steel tubing 15mm bore and connections including cleaning and refixing of old GI tubing 15mm bore including connections in new or old position (wall, ceiling & floor). Note :- The unit rate is included for all fittings required for re-connection. |
| 46 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and M&L for Joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile of size n exc 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) complete all as specified and directed. |
| 47 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and Material and labour forGlazed ceramic coloured tiles350x250mm/ 450 x 300 mm x 7/8 thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles on vertical surface such as skirting/ dadoincluding 10mm thick 1:3 backingcoat complete all as specified and directed. |
| 48 | Material and labourfor 25 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring surface finished even and smooth without using extra cement,including demolition of existing cement concrete & including disposal of demolition material upto MD land complete all as specified and directed. |
| 49 | M&L for cement plaster rendering 15mm thick on fair faces of brick/concrete surfaces with two coats i.e. (10mm thick backing coat in CM 1:6 and 5mm thick finishing coat in CM 1:4) and mixed with liquid water proofing compound as per manufacturer instructions, finished even and smooth without using extra cement (WPC to be measured and paid separately) and Taking down old cement plaster on brick or stone walls, or concrete walls etc., hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises complete all as per specified and directed. |
| 50 | M&L preparation of newly plastered surfaces wall/ ceiling and applying three coats of white washing on ceiling/ walls surfaces complete all as specified and directed. |
| 51 | M&L applying two coat of cement based paint over a coat of primer, including preparation of newly plastered wall surfaces of any description, complete all as specified and as directed. |
| 52 | Supply and fixingAnodized aluminium size 605 x 605 mm snap grid frame work for false ceiling as per manufacturer instructions, with hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and6mm thick Non asbestos fibre cement building boards, fixed to sheet suitably placed in false ceiling grid made of Aluminium/G.I./ M.S. as per specification and drawing and including dismantling old unservicable ceiling board & including frame of any type and description, complete all as specified and directed. |
| 53 | Complete removal of existing water proofing treatment of any description and in any position including PCC padding any thickness and cleaning, wire brushing, watering & removal of debris outside MOD complete all as specified and directed.NOTE :-Unit rate quoted shall also include for removal of PVC water storage tank wherever existing carefully and refixing at the same or other position after completion of roof repair work. |
| 54 | M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight). |
| 55 | Roughening surfaces of old concrete floors by picking, sweeping clean and washing down with water to remove dusts etc. complete all as specified and directed. |
| 56 | M&L for Brushing neat cement slurry with 3kg/sqm all as specified and directed. |
| 57 | M&L PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in concrete padding laid to required slope incl finishing the concrete surface fair and even without using extra cement complete all as specified and as directed. |
| 58 | M & L for 10 mm thick screed bed or bedding layer in cement mortar (1:4) for laying roof finish as padding finished with WPC @ 3% by weight of total cement, complete all as specified and directed NOTE :- WPC shall be measured and paid separately. |
| 59 | Apply oil bound bitumen primer @ 0.40 Litre / Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg / Litre at 25 degree Celsius on the prepared dry roof surface. |
| 60 | M&L for APP polymeric membrane min weight 3.0kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm laid on primed surfaces by torch application method complete all as specified and directed |
| 61 | M&L for preparation of new surfaces of any description not otherwise described over 10cm width or girth and applying two coats of solar reflective aluminium paint @ 0.10 kg/sqm of membrane surfaces complete all as specified and directed |
| 62 | S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws and including dismantling of any type of sheets in roof coverings complete all as specified & directed. |
| 63 | Supply and fixing MS tubes/Square bars/Angle square bariron using various sections such as poles, rafters, purlins laddersand cleats as directed by Engineer-in-Charge and all specified and directed. |
| 64 | M&L Plain cement concrete (1:3:6) type C1 (20 mm graded stone aggregate), 75mm thick, as in plinth protection courses, top surface of concrete finished even and smooth without using extra cement,including expansion joint 10mm thick filled with mastic filling comprising of 01 part of heated blown bitumen and 3 parts of sandincluding demolition of existing cement concrete including disposal of demolition material upto MD land complete all as specified and directed. |
| 65 | M&L for Preparation of old decoratedplastered or unplastered surfaceof wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying one coat oil bound distemper complete all as specified and as directed. |
| 66 | Material and labourfor Preparation of old decoratedplastered or unplastered surfaceof wall, chajja,ceiling, balcony, facia etc., brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent, trading, oil, greasy spots and applyingone coat of whitewashcomplete all as specified and directed. |
| 67 | M&L for Preparation of old painted surfaces of steel and applying one coat of synthetic enamel paint using mechanical means over 10 cm width or girth, not other wise describedcomplete all as specified and as directed. |
| 68 | Supply and fix polished Sadarahalli granite slab flooring 20 to 22 mm thick with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick screed bed in cement mortar 1:4 complete on staicase complete all as specified and as directed. |
| 69 | Petty repair to internal/external water inlet water GI/CPVC pipe line of any size coming from over head tank to the quarter including socket,elbow,nipple ,with repair to water blockage , pipe line leakage, cleaning internally, removing of air/dust blockageincluding concealed water tubing etc n exc 3m length of any height using scaffolding and and making the water supply functional complete all as specified and directed. |
| 70 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and taking out old unserviceable steel/plastic/cpvc water tubing and connections complete. |
| 71 | Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and taking out steel/plastic/cpvc water tubing and connections complete. |
| 72 | Supplying and fixing in repairs of 20mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA CPVC complete all as specified. |
| 73 | Supplying and fixing in repairs of 25mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA CPVC complete all as specified. |
| 74 | Supplying and fixing in repairs 20mm outer dia CPVC brass elbow and all as specified. |
| 75 | Petty repairs to refixing the existing Wash hand basin and Sinks made of stainless steel 1mm thick kitchen flat back including fixing cantilever CI/Angle iron brackets embedded in concrete block including connecting waste coupling 32mm bore, including bedding, waste fitting, waste pipe in cement mortar to dwarf wall and connecting union to pipe, filling gap in white cement and all necessary fittings to fixed in repair(including taking down and refixing the same position) complete all as directed. |
| 76 | S & F in repairs Bib taps fancy type chromium plated with crutch or butterfly handle screwed down screwed for galvanised iron pipe or for brass ferrule and fixed complete for 15 mm bore all as specified and as directed. |
| 77 | S&F in repairs of Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms)and as directed. |
| 78 | S&F in repairs of pillar Tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-110gms) and as directed. |
| 79 | S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm fixed in repairsall as specified and directed. |
| 80 | S&F 32 mm Waste Coupling fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed including taking down existing one completeall as specified and directed. |
| 81 | S&F Plate rack of size 65 cm x 96 cm made of stainless steel fixed in repairs complete all as specified and directed. |
| 82 | S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, screwed for iron pipe complete all as specified and directed. |
| 83 | S&F in repair Brass Chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipecomplete all as specified and directed . |
| 84 | Dismantling wrought iron or mild steel work of any description all as specified and directed. |
| 85 | S&F Rotational moulded polyethylene water storage tank of1000 Ltrs capacity cylindericalvertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including taking down of old unserviceable tank complete all as specified and directed. |
| 86 | Supply and fixing in repairs 20mm dia gun metal gate valve with iron wheel screwed both ends for iron pipe and all as specified and directed. |
| 87 | S & F in repair Ball valves 25mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe & fixed. (minimum weight-210 gms) complete all as specified and directed. |
| 88 | M&L 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work including taking down old complete all as specified and as directed. |
| 89 | S&F Continuous (piano) hinges, stainless steel bright finish or electrogalvanised of 40mm width of flaps (when open) complete including taking down old one all as specified and as directed. |
| 90 | S&F Magnetic catches with 8mm dia steel ball and brass body and striking plate including taking down old one complete all as specified and directed. |
| 91 | S & F in repair of 12 mm thick ,7 ply, plywood ,grade BWR ,type BB fixed to wooden frame work in wall with nails including removal of old boards of any description complete all as specified and directed |
| 92 | S&F Decorative laminates of 0.90 mm thick type matt finish, colour and pattern as approved. including taking down existing one complete all as specified and as directed. |
| 93 | M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms, shelves in cupboard,handwash places and like including necessary cutting and grooving to wallsand making good by pointing in cement mortar (1:2) using admixture of pigment to match with shade of graniteover andincluding cement screedbed Cement Mortar (1:6) 15 mm thickcolourof granite as approved incl removal of old flooring of any description all as specified and directed.NOTE : (i)Dismantling of stone slab and tiles laid bedded and pointed in any mortar of any discription of thickness in floor shall deemed to be included in rate quoted for this item.(ii)The unit rate is deemed to be included for rounding to edges of stone slabs. |
| 94 | S&F in repairs 40mm bore unplasticised PVC pipe of pressure rating 10 kgf/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed. |
| 95 | M&L in repairs 300x300x25mm thick prepolished cement concrete chequered tiles jointed in neat cement slurry and pointed in white or coloured cement to match the floorand including 20mm thick screed bed in CM 1.4 and incl removal of old and neccessary demolition complete all as specified and directed. |
| 96 | M&L PCC (1:4:8) type D2 using 40mm graded aggregate 75mm thick as in sub base of floor finished even and rough to receive top layer and all as specified and directed and Demolition ofold Concrete (un reinforced) of any description and in anypositionnot otherwise specifically provided. |
| 97 | Material and labourfor Preparation of old decoratedplastered or unplastered surfaceof wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying one coat of cement based paint complete all as specified and as directed. |
| 98 | M&L for Preparation of old painted wooden surface of any description and applying one coat of synthetic enamel paint using mechanical means, not otherwise described over 10 cm width or girth, complete all as specified and directed. |
| 99 | Material and labourfor preparation of new steel surface and iron work of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer and all as specified and directed . |
| 100 | M&L for Preparation of old decorated surfaces of wallsby using pressure washer, remove all dirt & dust ,applying one coat of wall care putty and then applying two coats of premium oil bound distemper over one coat of primer as per manufauturer instruction of required shade complete all as specified and directed. |
| 101 | Supply and fixing in repairs 7 feet 4 pipespulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm,made up of detrin with rope guide mounted on channel pair of length 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg/, minimum weight of rope shall not be less than 7700Gms/unit . Make : Easydry or equivalent. |
| 102 | Raking out joints / pointing to squared rubble masonry coursed or uncoursed built in cement mortar or cement lime mortar complete all as specified and directed. |
| 103 | Keyed pointing on squared rubble masonry coursed or uncoursed (Bangalore Pattern) in cement mortar 1:4 complete all as specified and directed. |
| 104 | M&L for Vitrified Ceramic tiles 10 mm thick, lightshade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over andincluding screed bed or bedding layer, 15 mm thick in Cement Mortar 1:6complete including dismantling of existing old tile flooring and disposal to outside MD land complete all as specified and directed. |
| 105 | M&L for Vitrified Ceramic tiles 10 mm thick, lightshade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertcal surfaces such as skirting/ dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over andincluding screed bed or bedding layer ,15 mm thick in Cement Mortar 1:6complete including dismantling of existing old tiles and disposal to outside MD land complete all as specified and directed. |
| 106 | Taking down chowkhat or frame (wooden/steel/aluminium) not exceeding1.5 Sqm each with shutter (without taking off shutters from the frame) all as specified and as directed. |
| 107 | S&FSteel windows with side hung shutters including projecting type hinges, frame with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 108 | S&F Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads in section area 6 sq.cm but not exc 13 sq cm including taking down exisiting one complete all as specified and as directed. |
| 109 | S&F 4 mm thick sheet glass ordinary quality and glazing complete in square n exc 0.50 Sqm in each pane complete all as specified and directed. |
| 110 | S&F frosted glass 4.0mm thick, pin head typen exc 0.5 Sqm in each pane and fixed. completeall asspecified and directed. |
| 111 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed. |
| 112 | S&F Factory made Solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC\"C\"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitablePVCsheetbeadingand jointed together with solvent cement complete all as specified and directed. |
| 113 | S&F Butt hinges 75 mm long medium weight cold rolled stainless steel complete all as specified and as directed. |
| 114 | Supply and fixing 150 mm long aluminium anodized barrel tower bolt extruded section complete all as specified and as directed. |
| 115 | Supply and fixing aluminium handles cast type anodized 150 mm long complete all as specified and as directed. |
| 116 | M&L for Providing and injecting chemical for post constructional Anti TermiteTreatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 117 | M&L Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for4mm thick plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass not exc 0.5 sqm in each pane complete all as specified and directed. |
| 118 | M&L Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for4mm thick plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass exc 0.5 sqm in each pane complete all as specified and directed. |
| 119 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete including taking down existing one all as specified and directed. |
| 120 | S&F Aluminium body door closer hydraulically regulated,designation No.3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kg and fixed including taking down existing one complete as directed. |
| 121 | Taking down andre-fixing the same existing aluminium door/window/partitions (each shutter arean. exc 5Sqm) after carrying out repairs as required, removing the existing beading and fixing new (i.e. including change star lock, rubber beadings, bottom bearing, clips etc) rubber beading of suitable size with adhesive, overhauling of floor springs including repairing/cleaning/greasing etc and make the same fully functional all as specified and directed. |
| 122 | Petty repair to wooden door, skelton door, flush door, wooden window, wooden ventilator, cupboard door, wardrobe door,PVC door with shutter (size upto 3 Sqm) including roller, windows, etc with minor repair and easying and adjustment/alignmentto openable with assessories and including taking down and refixing complete all as directed. |
| 123 | Supply and fixing in repairs 200 mm long aluminium anodized barrel tower bolt extruded section complete all as specified and as directed. |
| 124 | Supply and fixing 100mm long Butt hinges medium weight cold rolledstainless steel, fixed in repair to wooden frame/welded to metal frame complete all as specified and as directed. |
| 125 | S&F in repairs floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete including taking down existing oneall as specified and as directed. |
| 126 | M&L Machine cut kota stone slab 20-25 mm thick as in flooring, laid over and incl 20 mm thick screed bed in CM 1:3 set and jointed in neat cement slurry and pointed with cement and pigment to match the shade of the slab incl rubbing and polishing including removal of old and necessary demolition complete all as specified and as directed. |
| 127 | Taking down and refixing MS window shutters n. exe 1.5 sqm through cutting of existing any type of hinges, handle and tower bolt and fixing new box type hinges, MS handle and MS tower bolt the same window by necessary welding.The quoted rates shall be included the following aspect:-(a) Cutting of existing piano hinges, handle and tower bolt from window frame and shutter.(b) Fixing of removed shutter in the same frame on MS box type hinges 100mm, MS handle 100mm and MS tower bolt 100mm by welding.(c) Easing and adjusting the shutter before re-fixing if required.(d) Finishing the window frame and shutter with two coat of synthetic enamel paint.(e) Necessary scaffolding material to be provided by the contractor without any extra cost to deptt as the building height is more than 10mtr.Note :Box type hinges, handle and tower bolt shall be measured separately as supply only and labour element is deemed to be included in this item. |
| 128 | Supply only MS Box type hinges 50mm. |
| 129 | Supply only MS Handle 100mm. |
| 130 | Supply only MS tower bolt 75mm |
| 131 | S&F in repairs Stainless steel peg set of having 5 pegspowder coated fixed to wall surface with pvc plug and screw complete including taking down all as specified and as directed. |
| 132 | Supply and fixing in repair steel window handles with nuts and bolts or with screws including welding/fixing with nuts complete all as specified and directed. |
| 133 | Supply and fixing in repair steel window peg stay all as specified and directed. |
| 134 | Supply and fixing in repair steel window hinges as per sample by welding all as specified and directed. |
| 135 | Material and labourfor Removing plant/Uprooting of vegetation growth including roots on wall/roof/parapet near pipes etc and applying acid treatment afterremoving roots for preventing regrowth and making good disturbed surfaces/area in superficial area exc 150sq.cm but n.exc 400 sq.cm and averaging depth not exceeding 10 cm by using PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) or 10mm thick plastering in cement mortar 1:3 as required and finishing the surfaces to match with the existing surface complete all as specified and directed. |
| 136 | Note for item No 135 :- (a) Rate quoted by the tenderer shall be deemed to inclusive of double steel scaffolding.(b)Contractor shall provide safety gears to his workers at his own cost and safety pre caution to avoid accidents. |
| 137 | Material and labourfor Dismantling the existing unserviceable gully trap including chamber and material and labour for provision of salt glazed stoneware gully tarp, square or round mouth type \"P\" of size 180X150mm, including setting and jointing in cement mortar 1:1 plain cement concrete base in PCC 1:2:4 type B1, brick work in cement mortar 1:4 rendering in cement mortar 1:4 all around finished even and fair using extra cement RCC cover slab in RCC type B1, 1:2:4 with 6mm dia reinforcement etc, complete all as specified and as directed |
| 138 | Grinding of existing mozaic/kota stone/tiles in wall/flooring including mirror polishing, cleaning of tiles/granite and joints filling and apply white cement,including grouting of floor trap surroundings with white cement complete all as specified and directed. |
| 139 | Note :- An amount of Rs 40,275.00 on account of credit schedule for schedule \"A\" part II shall be deducted from the total amount of BOQ to arrive at the contract sum. |
AI Tender Summary
Tender Timeline
Jan 30, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 20, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 27, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender