|
| 1 | Demolition ofbrick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified and directed. |
| 2 | M&L brick work with sub class B Bricks ( Old Size )straight or curved on plan exc 6 m mean radis built in CM 1:6complete all as specified and directed. |
| 3 | M&L brickwork with subclass `B\" bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except brickscomplete all as specified and directed. |
| 4 | Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed. |
| 5 | Demolition of stone Slab Laid Bedded and pointed in any Mortar and tiles of any Description or thickness in floor, Apron etc complete all as specified and directed. |
| 6 | S&FVirified Ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colouredcement over 15mm screed bed in CM 1:6 complete all as specified and directed. |
| 7 | S&FVirified Ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 sqm, as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or colouredcement over 15mm screed bed in CM 1:4 complete all as specified and directed. |
| 8 | M&L Non skid ceramic coloured tiles 7-8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with whiteor colour cemnt to match including 15 mm thick screed bed in cm 1:6 complete all as specified and directed. |
| 9 | S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4)joint free with grout of matching shadecomplete all as specified and directed. |
| 10 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each. Complete all as specified and directed. |
| 11 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each. Complete all as specified and directed. |
| 12 | S&F powder coated anodised aluminium windows slidingtype (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) inclstainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed. |
| 13 | S&F powder coated anodised aluminium Ventilators Side or top or bottom hung type as per site requirement with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) inclstainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame,with one or more rebates including S&F 5.50 mm thick tinted pin headed glass complete all as specified and directed. |
| 14 | S&F powder coated anodised aluminium windows side hung type with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) inclstainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed. |
| 15 | M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290 Gde-165complete all as specified and directed. |
| 16 | Material & Labour For Powder coated anodised aluminium Door Shutter without sash bar, aluminium section weighing 0.55 kg/Mtr (minimum) including necessary joining cleats, Handles, Locking Arrangement ,door stopper, Hydraullic door closer, base plate machine, Glazing clips, rubber packing anodised aluminum snap beading, screws suitable anodised aluminium frame with one or more rebates including supply and fix 5 to 6 mm thick black glass all and aluminium grill fixed to frame complete all as specified and directed. |
| 17 | S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as per direction of Engineer-In-Charge. |
| 18 | S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (including MS Hold Fast).Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed. |
| 19 | S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked,complete all as specified and directed. |
| 20 | S&F aluminium anodized handle of size 150 mm, ISI marked,complete all as specified and directed. |
| 21 | S&F aluminium alloy, anodised, sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed ISI markedcomplete all as specified and directed. |
| 22 | Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed. |
| 23 | Material and Labour for 20mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface and wall (WPC will be measured and paid seperately as supply only rate). Complete all as specified and directed. |
| 24 | M& Lfor PCC padding 1:2:4 type B1(using 20 mm graded stoneaggregate) average thickness 25mm,finished fair and even without using extra cement on roof surfaces complete all as specified and directed. |
| 25 | Material & labour for cleaning of concrete or plasteredsurfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followedevenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen, over it laid with 3mm thickAPP modified polymeric waterproofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric (weightnot less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction andapplying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymericwater proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed. |
| 26 | Supply only integral water proofing compoundcomplete all as specified and directed. |
| 27 | Taking down of cementplaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 28 | M & L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed. |
| 29 | M & L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth with out usingextra cement complete all as specified & directed. |
| 30 | Materials & labour for prepration of newely plastered surface and finishing the surfaces of wallwith wall putty and applyingtwo coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed. |
| 31 | Materials & labour for prepration of Old plastered surface and finishing the surfaces of wallwith wall putty and applyingtwo coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed. |
| 32 | M &L Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth Finishing walls and applyingAcrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) using roller for painting complete all as specified & directed. |
| 33 | M& L Preparation of Old Plastered surface of wall and Complete removal of existing treatment by mechanical means plastered old surface of wall and applying 2mm thick wall care putty over one coat of primer and making the surface smooth and applying two coat of Acrylic smooth exterior paint of required shade ( two coat @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2020 kg/10sqm) using roller for painting complete all as specified & directed. |
| 34 | M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel Paint over one coat of Red oxide primercomplete all as specified and directed. |
| 35 | Material & labour for 5 mm thick plaster in CM 1:3 on ceiling surfaces, surfacesfinished even and smooth without using extra cement complete all as specified and directed. |
| 36 | Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed. |
| 37 | S&F in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed. |
| 38 | S&F in repair 15 mm dia stop cock/angle cockcast copper alloy chromium plated screwed downhigh pressure with fancy typescrewed both ends for iron or for union. Complete all as specified and directed. |
| 39 | Supply & fix in repair vitrous china wash down water closet pan ( padestal pattern) , white ( excluding fixing bolts, flushing cistern ). Including S & F Flush pipe of polyethylene or low or high density of PVC, 32 mm dia, for low level cistern and S & F white plastic seat cover for WC ( E.T ) white including MS CP or aluminium hinging device complete all as specified and directed. |
| 40 | S & F in repair for CP Health Faucet brass body with wall hook and one meter SS braided rubber hose pipe complete all as specified and directed. |
| 41 | Supply and fixing PVC Heavy Duty waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed. |
| 42 | S&F in repair 10 litre capacityPVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed. |
| 43 | Supply & fix PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. |
| 44 | S&F in repaircromium plated 15 mm bore size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrulecomplete all as specified and directed. |
| 45 | Supply & fix in Repair pillar taps, fancy typecast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore,complete all as specified & directed. |
| 46 | S&F in repair CP brass soap dishcomplete all as specified and directed. |
| 47 | S&F 600mmx750mm fancy type bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 48 | S&F (in repair)chromium plated towel rail 20mm dia D type 600 mm long as a approved qualitycomplete all as specified and directed. |
| 49 | S&fIin repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and directed. |
| 50 | S&Ffancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed. |
| 51 | S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 52 | S&F in repair waste coupling of PTMT (half or full threaded)suitable for urinals (Minimum weight 32mm-45gms) complete all as specified and directed. |
| 53 | S&F in repair urinal spreader complete all as specified and directed. |
| 54 | Supply & fixing in repair steel C.P. grating 100/125 mm dia as reqd at sitecomplete all as specified and directed. |
| 55 | S&F in repair for 110 mm bore PVCfloor traps plain with grating and 300 mm long out let including jointing with cement concrete type B -1 1:2:4 complete all as specified & directed. |
| 56 | Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from sitecomplete all as specified and directed. |
| 57 | S&F triple layer of any colour 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipescomplete all as specified and directed. |
| 58 | S & F Ball valves 20 mm dia high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms/ 50mm-1240 gms)complete all as specified and directed. |
| 59 | Supply, fix 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing completeincluding taking down of old GI tubes of any grade complete all as specified and directed. |
| 60 | Supply, fix 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete including taking down of old GI tubes of any grade complete all as specified and directed. |
| 61 | S&FGun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed for 15 mm pipe. Complete all as specified and directed. |
| 62 | S&FGun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed for 20 mm pipe. Complete all as specified and directed. |
| 63 | S & F in repair 25mm dia Stainless steeldecorated curtain rod with braket and ring complete all as specified and directed. |
| 64 | Demolition of reinforced concreteof any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) complete all as specified and directed. |
| 65 | M & L RCC 1:2:4 Type B1 ( Using 20 mm graded stone Aggregate ) in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the likecomplete all as specified and directed. |
| 66 | S&F mild steel TMT bars No 500D 10mm dia and over, cut to length bent to shape requiredincluding cranking, bending spirally for hooping for columns, hooking ends and binding with and including MSwire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed. |
| 67 | M & L For Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick flat fair finished surfaces of concrete. Complete all as specified and directed. |
| 68 | M & L For Granite (of any type) tiles 15 to 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types including Screed bed or bedding layer of mortar 15 mm thick in C M 1:6, for laying floor finish Complete all as specified an directed. |
| 69 | S&F sinks made of stainless steel lmmthickkitchenorlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing with Granite Stone and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm Complete all as specified and directed. |
| 70 | M & L repair to overhang portion of chajja, facia, dropwall and Chimeny etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered from GL and upto 7m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance afterbinding of reinforcement for measurement otherwise no payment will be considered on this account)complete all as specified and directed. |
| 71 | M&L 60mm thick PCC tile (interlocking type) jointed filled with sand and campacted with mechanical plate vibrator complete all as specified and directed. |
| 72 | M&L Sand for cushioning, interlocking tiles joint to be filled with sand, including spreading and levelling in layers n exc 25 mm thick comnplete all as specified and directed. |
| 73 | Material & labour for hardcore of broken bricks gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed. |
| 74 | M&L for plain cement concrete 1:3:6 type C-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed. |
| 75 | S&F Pre-cast cement conrete kerb stone block masonry 1:2:4 Type B-1 (using 20mm graded stone aggregates) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6,complete all as specified and directed. |
| 76 | Demolition of plain cement concretein ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified & directed. |
| 77 | M&L Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and no pigment laid over including 15mm thick screed bedin CM 1:6 complete all as specified and directed. |
| 78 | M&L 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in path /plinth protection , finish even & smooth without using extra cement complete all as specified and directed. |
| 79 | Dismantling ceiling board of insulation boards etc any thickness complete all as specified and directed. |
| 80 | Material & labour for provision of Aluminium anodized frame work(snap grid) suitable for size as in false ceiling of size 600mmx600mm consisting of followings andall as directed:-i) Aluminium sections incorporated in frame work shall conform to designation 63400 given in IS: 737-1986. ii) The snap grid shall consist of aluminium anodized main /cross tee of size 36.5mmx25mmx1.4mm thick and 25mm x 25m x1.4mm thick, respectively.iii) Snap grid frame shall be fixed to ceiling withsupporting hangers consisting of S & F 2mm dia mild steel GI wire.iv) The main and cross tees shall be jointed at junction/crossings with aluminium anodized angle bracket, of size 15mmx15mmx1.4mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions.v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with aluminium anodized angle of size 25mmx25mmx1.4 mm anodizedthick. vi) Size of the snap grid shall be 605mm by 605mm. vii) Minimum average thickness of anodizing shall be 15 micron. |
| 81 | S&F 4 mm thick Gypsum/Everest Board in ceilingsize 60cm x 60cm fixed to aluminium snap gird completeas per manufcturer\"s instructions |
| 82 | Taking down carefully any type of battens or conduit point wiringwith or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge. |
| 83 | Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including new PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly complete all as specified and directed for Onelight point/Fan Pointcontrolled by one, one way switch 05 / 06 Amps. |
| 84 | All as per item No 83.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch. |
| 85 | All as per item No 83.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch. |
| 86 | All as per item No 83.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board. |
| 87 | Supply and fix in repair switch piano flush type, 05 / 06 Amps single pole, one way 240 voltscomplete all as specified and directed. |
| 88 | Supply and fix in repair socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed. |
| 89 | Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed. |
| 90 | Supply and fix in repair switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed. |
| 91 | Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fittingcomplete all as specified and directed. |
| 92 | Supply and fix LED lamp 9/10 watt. Complete all as specified and directed. |
| 93 | Supply and fixing decorativeLED tube light fitting 1x10 wattsurfacemounting , intigratedwith opal diffusercomplete withallacessoriescomplete all as specified and directed. |
| 94 | Supply and fixing decorativeLED tube light fitting/warm as directed 1x20 wattsurfacemounting , intigratedwith opal diffusercomplete withallacessories complete all as specified and directed. |
| 95 | Material and labour for sub main wiring with 2x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + o1 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existingand taking down the old unserviceable submain wiring of ant type complete all as specified & directed.Note - One meter of conduit along with 2x6.0 Sqmm wire and one 6.0 sqmm earth wire shall be measured as one length). |
| 96 | Supply and fixing (in repair)sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfacesand taking down the old distribution board of any typecomplete all as specified and directed. |
| 97 | S&F (in repair) sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfacesand taking down the old distribution board of any typecomplete all as specified and directed. |
| 98 | Supply and fixing MCB, SP, AC, 240 volts \"B\" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed. |
| 99 | Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps10kA and making connections complete all as specified & directed. |
| 100 | Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision for four pole isolator/mcb as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any typecomplete all as specified and directed. |
| 101 | Supply & Isolator 4 pole\"B\" series 100 amps capacity AC 415 V,10kA complete all as specified and directed. |
| 102 | Taking down unsv cable ofany type/size and S&F (in repair) , laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 35 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed. |
| 103 | Excavationin trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft/ loose soil and gating out in soft / loose soil complete all as specified and directed. |
| 104 | M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified & directed. |
| 105 | Material and labour for contineous brick edging withwidth equal to the depth of the brick of whole sub class \"B\" bricks laid on edge complete all as specified and directed. |
| 106 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in soft / loose soil complete all as specified and directed. |
| 107 | Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed. |
| 108 | Supply and fixing in repair LED security light fitting 1x45 Watt luminaries with die cast aluminium housing IP-66 comprising epoxy powder coated enclosed with glass coverembedded lensin frame with high power LED white lamp type of capacity 45 watt complete all as specified and directed. |
| 109 | Supplying and fixing LED bulk head light fitting wall mounted with inbuilt edge lit LED lamp 10 watt, complete with all acessories complete all as specified and directed. |
| 110 | Supply & fixing of ceiling rose, 3 terminal /PVC/polycarbonate isolated body complete all as specified & directed. |
| 111 | Supplying and fixing recess mounting LED 2X2 luminaire 34/36 WCRCA powder coating housing with anti-glare diffuser new deep back lit panel metallic frame, including all acessories complete all as specified and directed. |
| 112 | Supply and fixing steped type electronic fan regulator flush typeAC, 230 volts,complete all as specified & directed. |
| 113 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Complete all as specified and directed. |
| 114 | Supply and fix wall fan 400 mm sweep copper woundedwith pull cord to control speed and oscillation,three blades,230 volts,50 Hz ,speed not less than 2000 RPM, air delivery not less than 90 CUM not more than 110 watt including all accesories for fixing it on wallcomplete all as specified and directed.Note:- Old unsv fan should be deposited to AGE E/M -II Yard under GE(S) Meerut |
| 115 | Supply and fix Exhaust fan 300 mm sweep , single phase 50 HZ , speed 1400 RPM , air delivery 1300 Cumm not more than 80 watt all including making hole if required complete all as specified and directed.Note:- Old unsv fan should be deposited to AGE E/M -II Yard under GE(S) Meerut |
| 116 | Supply and fixing light duty Exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, not less than Rpm 2000, copper windingand fixing accessories 230 Volt and230/250 mm sweep with and including making hole of suitable size in the wall, plastering the surface making good damaged portion with plaster in CM 1:4 incl recolouring complete all as specified and directed.Note:- Old unsv fan should be deposited to AGE E/M -II Yard under GE(S) Meerut |
| 117 | Supply and fixin replacement of decorative wall light fixture made up of polycarbonate suitable for 10 W retrofit LED lamp and including 10 W LED lamp and including all accessories for fixing of fitting on wallcomplete all as specified and directed.Note:- Old unsv fan should be deposited to AGE E/M -II Yard under GE(S) Meerut |
| 118 | Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means oflug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipemedium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completioncomplete all as specified and directed.Note- After completion of work if desired test result is not obtained the earthing to be redone with out any extra cost of department . |
