|
| 1 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipment’s, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soilup to 300 mm dia. |
| 2 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineering-charge. |
| 3 | Supplying, assembling, lowering and fixing in vertical position in bore well, un plasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia |
| 4 | Supplying, assembling, lowering and fixing in vertical position in bore wellun plasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia. |
| 5 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia. |
| 6 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of useable water yield without sand content (beyond permissible limit), with required capacity air compressor,running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 7 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: 150 mm dia. |
| 8 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp |
| 9 | Providing and fixing Bail plug/ Bottom plug of required dia. to the bottom of pipe assembly of tube well as per IS:2800 (part I). 150 mm dia. |
| 10 | Providing and fixing G.I. pipes complete with G.I. fittings includingtrenching and refilling etc. 50 mm dia. nominal bore |
| 11 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipeetc. complete : 50 to 80 mm nominal bore |
| 12 | Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) : 50 mm nominal bore |
| 13 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality. 50 mm diameter pipe |
| 14 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refillingthe earth or cutting of wall and making good the same complete wherever required : 50 mm nominal bore |
| 15 | Supply and fixing 3 core 6 Sqmm dia. Copper conductor Submersible cable making Connection binding the cable with pipe with SS wire making etc. Complete as reqd. |
| 16 | Supply Installation, Testing & Commissioning of Vertical Submersible motor pump set etc. as reqd. (3 P h Submersible pump 10 HP.) |
| 17 | SITC of 3Ph Submersible pump controller of 10 HP with ac3 Contractor h Protection dgree IP 54 Class H Insulation voltage range 260-440V etc complete as reqd. |
| 18 | Round 12 SqmmSteel Ropes |
