Tender For Electric High Mast Light At Turibon More At Bishnupur Gp Under Hemtabad Panchayat Samity
Tender Value
4.48 Lakhs
Estimated cost
Bid Submission
12 Feb 2025
0 days left
EMD
8968
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
hemtabad → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Electric High Mast Light At Turibon More At Bishnupur Gp Under Hemtabad Panchayat Samity
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoil within a lead of 75 m as directed. The item includes necess-ary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. B) Depth of excavation for additional depth beyond 1500mm and upto 3000 mm but not requiring shoring. Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand. (P.W.D schedule page No.34 & item No.1).Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood plank of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. [P.W.D Schedule page no.64, item no.12]. (f) 25 mm to 30 mm thick wooden shuttering without staging.Ground Floor. Ordinary Cement Concrete(mix 3 :1.5 :1) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any, in ground floor, as per IS codes. [P.W.D Schedule page no. 39, item no.7(a)].(i) Pakur Variety Stone.Reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial strightening and removal of loose rust (if necessary), cutting requisite length, hooking and binding to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor /upto 4 m. (i) Tor steel.[P.W.D Schedule page no.66, item no.15]In ground floor ---- |
| 2 | Supply and fixing led light 200 watt for high mast light (make philips/ crompton/ havells) with necessary connection limen output > 110LPW Model protection IP 66 |
| 3 | Earthing with 50 mm dia GI pipe 3064 mm thick x 3.04 mts long and 1 X 4 swg GI (Hot Dip) wie (4 mts Long0 13mm dia X 80mm long GI bolts , double washers incl S& F 15mm Dia GI Pipe Protection (1 mts long ) to be filled with bitumen partly under the ground ground level and partly above ground level driven to an average depth of 3.65 mts below the ground level as below: by TATA -Medium GI pipe |
| 4 | Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (hot Dip) MS Flat on wall / Floor with GI saddles as required and Connection to equipments incl. drilling holes, with bolts, nuts, washers etc. |
| 5 | Supply 4 core 25 sqmm PVC aluminium Armoured cable for the connectionfrom FP Box to WBSEDCL Source |
| 6 | Laying of one No. Cable upto 35 sqmm in underground trench 460 mmwide x 760mm avarage depth , with brickprotection on the top of the cable with 8 (eight) nos bricks per metre , including filling the spacce between the brick& cable and also the trench with shifted soil, levelling up and restoring surface duly rammed |
| 7 | Supply and fixing twine dome aviation obstruction light GLS Type |
| 8 | Supplying laying & fixing medium gauge GI pipe( ISI-medium)Protection with necessary fittings and joining metarials as required 40 mm dia. |
| 9 | 12.5 mts High Mast Tower Polygonal Shape shaft suitable for @ Rs. 106000/- (per set) 08 luminaires symmetric suitable wind speed up to 180 km/hr. Materials Cons : BSEN 10025# high Mast accessories # Mechanical Components including Head Frame & Pulley Assay, Winch Bracket Lantern Carriage Ring , Guide Ring Compensating Disc , Lightening Arrestor Etc.#Wire rope , Safety Wire Rope, D Suckle Clamps , Nuts and Bolts # Foundation Accessories #winch Assembly#cable # power Tools (Motor) * Luminaries and Feeder PAnel Box to be Provided Make- BP Project / Subham Pole Projects pvt ITD/Bajaj. |
| 10 | Supply , Fixing glow shine Board on Vinyle Board(4\" x 2.5\") 2 numbers |
| 11 | Supply and fixing outdoor type feeder pillar box including MCB, timer and necessary connection feet, it will be fixed on 1 mtr above from GL. (Make L & T/ Standard) |
| 12 | Total |
| 13 | Add GST @ 18% |
| 14 | Total |
| 15 | Add Cess @ 1 % |
AI Tender Summary
Tender Timeline
Jan 30, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 12, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 17, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender