|
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Providingandlayingvitrifiedfloor tiles in different sizes (thickness to be specifiedbythemanufacturer)with water absorption less than 0.08% and conforming to IS: 15622, of approved make,inallcoloursandshades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with [email protected]/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 3 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting jointing with grey cement slurry @ 3.3 kg/ riser of steps, over 12 mm thick bed of cement mortar 1:3 1sqm including grouting the joint with white cement & matching pigments etc complete Size of Tile 600x600 mm |
| 4 | Providing and laying 1st quality Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 5 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 6 | Poviding and fixing partition upto ceiling height consisting of G.I. frame andrequiredboard,including providingandfixingofframework madeofspecialsectionpower pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceilingchannel50mmwidehaving equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm diameter50mmlengthorsuitable anchorfastenerormetalscrewswith nylonplugsandthestuds48mm wide having one flange of 34 mm and otherflange36mmand0.50mm thickfixedverticallywithinflanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, includingfixingofstudsalongboth endsofpartitionfixedflushtowall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, andfixingofboardstobothsideof frame work by 25 mm long dry wall screws on studs, floor and ceiling channelsatthespacingof300mm centre to centre. The boards are to be fixedtotheframeworkwithjoints staggered to avoid through cracks, M.S. fixing channel of99 mm width (0.9mmthickhaving twoflangesof 9.5mmeach)tobeprovidedatthe horizontal joints of two boards, fixed to the studs using metal to metal flat headscrews,includingjointingand finishingtoaflushfinishwith recommendedjointingcompound, jointingtape,anglebeadsatcorners (25mmx25mmx0.5mm),joint finisher and two coats of primer suitable for board as per manufacture\"sspecificationand directionofengineerinchargeall complete. 75mm overall thickness partition with12.5mmthickdoubleskintapered edged plain Gypsum plaster board conforming to IS: 2095: (part I): 2011 (Board with BIS certification marks) |
| 7 | Providing and fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped steel sections (galvanising @120 grams per sqm including both side) consisting of main \"T\" runner suitably spaced at joints to get required length and of size 24 x 38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm c/c,and cross \"T\" of size 24 x 28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm c/c to from a grid of 1200 x 600 mm and secondary cross\"T\" of length 600 mm and size 24 x 28 mm made of 0.33 mm thick (Minimum) sheet to be interlocked at middle of the 1200 x 600 mm panel to form grid of size 600 x 600 mm, resting on periphery walls/partitions on a perimeter wall angle pre-coated steel of size (24x24x3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm c/c with 25 mm long dry wall screws @230 mm interval and laying 15 mm thick desified edges calcium silicate ceiling tiles of approved texture in the grid, including cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main \"T\" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fastners, 4 mm G.I adjustable rods with galvanised steel clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm c/c along main \"T\", bottom exposed with 24 mm of all T sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings andas directed by Engineer-in-Charge. |
| 8 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over plasteredsurfacetopreparethe surface even and smooth complete. |
| 9 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/litre, of approved brand and manufacture, including applying additional costs wherever required, to achieve even shade and colour.Two or more coats on walls |
| 10 | Providingandfixing 12mm thick toughened glass fixed partition in 45mm thick slim profile system in powder coated profile. |
| 11 | 12mm thick toughened glass door |
| 12 | accessories for toughned glass door including floor spring, handle and lock all complete. |
| 13 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 14 | Painting with synthetic enamel paint on steel work of approved brand and manufacturer of required colour to give an even shade: one or more coats on old work |
| 15 | Painting with synthetic enamel paint on wood work of approved brand and manufacturer of required colour to give an even shade: one or more coats on old work |
| 16 | Providing & FixingFrosted Translucent,castPVC,self-adhesive vinyl,specialCRYSTAL-effectfilm toreproduceSand-blastingeffecton glass with customized designs, thicknessof2mil(0.05mm)without adhesive(0.8)withadhesivehaving minimumtensilestrengthof3.5 pound/inchat73F(0.6kg/cmat23 C). Adhesion after 24hrs of installationshouldbe4pounds/inch (0.7kg/cm)onAcrylic,Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors)Application -DECORATIVE/PRIVACYFILM ON GLASSElectronically/computer plotter cut. Applied on glass and other rigid, clear substrates. (partitions, doors, windows etc.) Available in 5 colours |
| 17 | Supplying and fixing Roller Blinds to thefollowingspecifications,Fabric shadeasapproved,sunscreen,dense basketweave5%opennessfactor. Operation: - Manual. Offset side- mountedmetalchainoperated Mounting: Pocket mounted. Shade Orientation: Regular roll, shade cloth fallsatwindowsideofroller. Configuration:Singleband AVERAGELENGTHOFBLINDis2.0 M to 2.5 M. The fabric to be Fire Retardent certified. |
| 18 | Provide fabric made cotton curtains as per approved shade and manufacturer/brand and to the satisfaction of Engineer-in-incharge |
| 19 | Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed three layer or graded plain wood particle board medium density grade I, ISI marked and conforming to IS:3087 marked, including top cover of 6 mm commercial plywood conforming to IS:303 BWR grade, nickel plated M.S. pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete to satisfaction. |
| 20 | Demolishing brick work manually/ by mechanical means including stacking ofserviceablematerialanddisposal ofunserviceablematerialwithin50 metresleadasperdirectionof Engineer-in-charge. In cement mortar |
| 21 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below |
| 22 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 23 | Dismantling stone flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 24 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore |
| 25 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 26 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 27 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 28 | Disposalofmoorum/building rubbish/ malba/ similar unserviceable, dismantledorwastematerialby mechanical transport including loading, transporting, unloading to approvedmunicipaldumpingground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areashavingdirectionsforrestricted hoursformovement/plyingofload carrying motor vehicle of 3.5 cum or more. |
| 29 | Providing and laying in position cementconcreteofspecifiedgrade excludingthecostofcenteringand shuttering-Allworkaboveplinth level upto V floor : 1:2:4 (1 cement : 2 coarse sand (zone- III)derivedfromnaturalsources:4 gradedstoneaggregate20mm nominal size derived from natural sources) |
| 30 | Centering and shuttering including strutting,proppingetc.andremoval of form work for : walls (any thickness), etc |
| 31 | Reinforcedcementconcreteworkin beams, suspended floors, roofs having slopeupto15°landings,balconies, shelves,chajjas,lintels,bands,plain window sills, staircases and spiral staircasesaboveplinthlevelupto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate20mmnominalsize derived from natural sources). |
| 32 | Centering and shuttering including strutting,proppingetc.andremoval of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 33 | SteelreinforcementforR.C.C.work includingstraightening,cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 34 | Half brick masonry with common burntclayF.P.S.(nonmodular) bricks of class designation 7.5 in superstructure above plinth level upto V level cement mortar 1:4 (1 cement : 4 coarse sand) |
| 35 | Extra for providing and placing 2 nos. 6mm dia MS bars at every third course of half brick masanory. |
| 36 | 12 mm cement plaster : 1:4 (1 cement : 4 fine sand) |
| 37 | Providingandfixing18mmthick gangsawcut,mirrorpolished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approvedshade,colourandtexture laidover20mmthickbasecement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touchups,includingrubbing,curing, mouldingandpolishingofedgesto give high gloss finish etc. complete at all levels. Granitestoneslabcolourblack, Cherry/Ruby red Area of slab over 0.50 sqm |
| 38 | Providingedgemouldingto18mm thick marble stone counters, Vanities etc.,includingmachinepolishingto edgetogivehighglossfinishetc. completeasperdesignapprovedby Engineer-in-Charge. Granite work |
| 39 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). teak wood |
| 40 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (PartI)non-decorativetype,coreof blockboardconstructionwithframe of 1st class hard wood and well matchedcommercial3plyveneering withverticalgrainsorcrossbands andfaceveneersonbothfacesof shutters: 32mmthickincludingISImarked StainlessSteelbutthingeswith necessary screws |
| 41 | Extraforprovidinglippingwith2nd class teak wood battens 25 mm minimum depth on all edges of flush doorshutters(overallareaofdoor shutter to be measured). |
| 42 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texturewithfollowingprocessinthe sequence as detailed below: 1. The surface to be polished is rubbedwithsandpaper80/120no. and then with sand paper of 160/180 nos.2.Applyingtwocoatsofsealerwith spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer gradingwithamplewatertoremove excess sealer layer and make the surfacefurthersmoothafterthiswet rubbing,thensurfaceisappliedwith specialgrademelaminefillerstofill allthesmallandbigholes/grooves etc.Fillercoattobeallowedtodry for 4 to 6 hrs on whichagain a light wetrubbingisdonethissurfaceis further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamineclearpolishandmelamine thinnerinrequiredproportion.This 1stcoatisallowedtodryfor24hrs then this dry surface is again fine wet rubbedsmooth,whichisfurther allowedtodryfor12hrs.Thefinal melaminepolishisappliedwith compressorpressurespraygunusing melamineclearpolishandmelamine thinnermixedinrequiredproportion complete as per direction of Engineer-in-Charge. (Final coat to be donein1or2layerswithoutgapof time.) |
| 43 | Providingandfixingwhitevitreous chinawater closetofrequired size of approvedshapeincludingproviding &fixingcistern with flushfitting,offlushing capacity of 10 litres,includingseatcover, andcisternfittings,nuts,boltsand gasket etc complete. |
| 44 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm size respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: |
| 45 | Providing and fixing CP Brass 32mm sizeBottleTrapofapprovedquality &makeandasperthedirectionof Engineer-in-charge. |
| 46 | ProvidingandfixingPVC soil,wasteand vent pipes (i) 100 mm dia |
| 47 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. (i) 100 mm dia |
| 48 | Providingandfixingplainbendof required degree. (i) 100 mm dia |
| 49 | Providing and fixing double equal plain junction of required degree. (i) 100x100x100x100 mm |
| 50 | Providing and fixing single equal plain junction of required degree : (i) 100x100x100 mm |
| 51 | Providing and fixing terminal guard PVC (i) 100 mm |
| 52 | Providing and fixing trap of self cleansingdesignwithscreweddown or hinged grating with or without ventarmcomplete,includingcostof cuttingandmakinggoodthewalls and floors : (i) 100 mm inlet and 100 mm outlet |
| 53 | Providingandfixing18-8S,type- 304, Stainless Steel towel ring round shape 178 mm outsidediameter, 162 mm inside diameter minimum distancesof55mmfromwallface withroundflangeconcealedfittings arrangementofapprovedqualityand colourallcompleteasper manufacturersspecificationand direction of Engineer-in-charge. |
| 54 | Providingandfixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms |
| 55 | ProvidingandfixingCPBrassHand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome FinishandWallHookwithN.R.V (BackFlowPreventer)including making all connections, fixing to wall with suitable brackets all as per manufacturersspecificationand direction of Engineer-in-charge. 15 mm nominal dia |
| 56 | Providingandfixing18-8S,type- 304, stainless steelTissue PaperDispenser345mmlong,110 mmwidewith455mmhighhaving 600C-foldor800multifoldpaper towels capacity with loading from bottom including fixing to wall as per manufacturersspecificationand direction of Engineer-in-charge. |
| 57 | Providing and fixing stone slab table rubbed, edges rounded and polished of size 75 x 50 cm deep and 1.8 cm thick in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 6 mm noiminal size) as per direction of Engineer-in-charge and finished smooth. Granite stone of approved shade |
| 58 | Providing and fixing wash basin with C.I brackets, 15 mm C.P. Brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White vitreous china wash basin 630 x 450 mm with pair of 15 mm C.P. brass pillar taps |
| 59 | Providing and fixing Pedestal wash basins all complete. |
| 60 | Providing & fixing C.P brass angle valve for basin mixer and peyser points of approved quality conforming to IS:8931 with 15 mm nominal bore |
| 61 | ProvidingandfixingChlorinated Polyvinyl Chloride (CPVC) pipes, havingthermalstabilityforhot& coldwatersupply,includingall CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 mspacing.Thisincludesjointingof pipes & fittings with one step CPVC solvent cement and the cost of cutting chasesandmakinggoodthesame including testing of joints complete as perdirectionofEngineerinCharge. Concealed work, including cutting chases and making good the walls etc. (a) 20 mm nominal outer dia Pipes |
| 62 | ProvidingandfixingChlorinated Polyvinyl Chloride (CPVC) pipes, havingthermalstabilityforhot& coldwatersupply,includingall CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 mspacing.Thisincludesjointingof pipes & fittings with one step CPVC solvent cement and the cost of cutting chasesandmakinggoodthesame including testing of joints complete as perdirectionofEngineerinCharge. Concealed work, including cutting chases and making good the walls etc.(b) 25 mm nominal outer dia Pipes |
| 63 | Providingandfixingbrassstopcock of approved quality :(a) 20 mm nominal bore |
| 64 | Providingandfixinguplasticised PVC connection pipe with brass unions (i) 45 cm length (a) 20 mm nominal bore |
| 65 | Providing & fixing chrome plated brass long body bib cock of approved quality conforming to IS standards. 15 mm nominal bore |
| 66 | Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 67 | Power connections, UPS wiring, distribution boards, extension boards, electrical fittings, LED lighting, ceiling fans, exhaust fans, ventilation fans, electrical switches, socket outlets, circuit breakers, power cables, cable management systems, wiring for electrical appliances, surge protectors, and any other related electrical components and installations required across all areas, including any necessary conduits, junction boxes, electrical enclosures, and incidental items , for attached drawing and scope of work. |
| 68 | ACs of 1.5 ton |
| 69 | NetworkingWork Switches: Managed gigabit switches with 24/48 ports (e.g., 2 units of 48-port switches or 4 units of 24-port switches).Structured Cabling: Cat 6 Ethernet cables or higher for 96 nodes, wall-mounted faceplates, and a patch panel in the server room.Wi-Fi Coverage: Dual-band Wi-Fi 6 APs (3 units) deployed for optimal coverage in staff cubicles, classrooms, labs, server room, reception, and meeting rooms. CCTV Setup: IP Cameras: 1080p resolution covering classrooms, labs, reception, meeting room, entry/exit points, server room, and staff cubicle area. NVR: 16-channel NVR with 2TB storage for 15–30 days of footage retention. PoE Switches: Power cameras efficiently. |
| 70 | Staff Table |
| 71 | Workstation Table in labs |
| 72 | Workstation Staff Table |
| 73 | Center head L Shaped executive office table |
| 74 | Centre head chair |
| 75 | Revolving high back chair with mesh back and cushioned seat |
| 76 | Revolving mid back chair with mesh back and cushioned seat |
| 77 | Revolving low back chair in labs |
| 78 | Front Office cum reception Table |
| 79 | Class Room Chair with Writing Pad |
| 80 | Almirah |
| 81 | Low height storage almirah |
| 82 | Center Head Room Sofa Set (02 Seater) |
| 83 | Sofa set (03 seater) |
| 84 | Sofa set (01 seater) |
| 85 | White board |
| 86 | Conference Table with pop up box with Chair (9 Seater) |
| 87 | Notice Board |
