|
| 1 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 2 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 3 | 200x10 mm |
| 4 | Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. |
| 5 | 200 mm |
| 6 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 7 | For fixed portionPowder coated aluminium (minimumthickness of powder coating 50 micron) |
| 8 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimumthickness of powder coating 50 micron) |
| 9 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in- charge. |
| 10 | Pre-laminated particle board with decorative lamination on both sides |
| 11 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 12 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 13 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc.complete. |
| 14 | Providing and fixing frosted film of minimum thickness 1 mm of make 3M or equivalent over the glass of windows, glass partition etc including cutting of film in a certain design, shape all complete as per the instructions of Engineer In charge. |
| 15 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit & accessories as required. |
| 16 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 17 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 18 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 19 | 3 Module (100mmX75mm) |
| 20 | 6 Module (200mmX75mm) |
| 21 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 22 | 5/6 A switch |
| 23 | 3 pin 5/6 A socket outlet |
| 24 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 25 | Single pole |
| 26 | Supply and fixing of Recess/surface mounted LED down lighter fixture having wattage 14-18 watt, powder coated CRCA / die-cast aluminium housing, with high effiency diffuser, CCT 5700K- 6500K, CRI >80 with SDCM<5, lumens efficiency output not less than 115 lumens / watt, with EMC/EMI compliant electronic driverhaving PF>0.9, THD < 10%, & minimum of 3kV surge/burst protection, complete with 50000 hrs burning for lifetime with supporting data sheet LM-79 & LM-80. The LED used in the luminaire shall be only Lumileds, Nichia, Cree, osram & LGIT and hanging with necessary chain etc as required. |
| 27 | Supply and fixing of Recess/surface mounted 600X600mmLED fitting 30-32 watt, powder coated CRCA / die-cast aluminium housing, with high effiency diffuser, CCT 5700K- 6500K, CRI >80 with SDCM<5, lumens efficiency output not less than 115 lumens / watt, with EMC/EMI compliant electronic driverhaving PF>0.9, THD < 10%, & minimum of 3kV surge/burst protection, complete with 50000 hrs burning for lifetime with supporting data sheet LM-79 & LM-80. The LED used in the luminaire shall be only Lumileds, Nichia, Cree, osram & LGIT and hanging with necessary chain etc as required. |
| 28 | Supply, Installation, Testing and Commissioning of 400 mm sweep, Wall mounted fan having 3 nos. blades, copper winding, Air delivery minimum 65 CMM, 1320 RPM or better including all remaining accessories suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
