|
| 1 | Supplying of one number PVC insulated and PVC sheathed / XLPE power cable (LT aluminium cable, armoured, underground) of 1.1 KV grade of following size as required. (Havells /KEI / Finolex / Polycab)1)2 x 10 sq. mm. |
| 2 | Supplying and laying of following size DWC HDPE pipe ISI marked (make - Tirupati / Tele Rex / Duraline / Prakash/equivalent) along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.1) 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 3 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. 1)Upto 35 sq. mm. |
| 4 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonary duct as required.1)Upto 35 sq. mm. |
| 5 | Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted). |
| 6 | Supplying and fixing hot pressed moulded G.I. pole box of size 250 mm. (h) x 200 mm. (w) x 100 mm. (d), made out of 16 SWG thick, with hinged cover and locking arrangements,with 2 Nos. 25 mm. x 3 mm. x 100 mm. long suitable aluminium bus bar and 1 No. 6 A SP MCB of \"B\" series on existing pole with dinbar and 4 Nos. insulator 25 mm. on existing pole with 2 Nos. MS flat clamp of 25 mm. x 3 mm. size, suitable holesin the bottom of box for entry of 2/3 Nos. street light cables and / suitable pipes etc. as required. |
| 7 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required. |
| 8 | Supplying and Drawing following sizes FRLS PVC insulated copper conductor single core cable in the existing street light poles ofheight upto 7 m. (Approximately) including connection in the fitting and MCB box etc. as required.1) 3 x. 1.5 sq. mm. wire |
| 9 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.1) 2 x 10 sq. mm (19 mm) |
| 10 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.1) 4 x 10 sq. mm (25 mm) |
| 11 | Supplying and embedding following dia G.I. pipe (medium class) in pole collar / foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 1) 32 mm. dia. |
| 12 | Providing, laying and fixing of following dia of G.I. pipe (medium class) in ground complete with G.I. fitting including trenching (75 cm deep) and re-filling etc. as required. 1) 80 mm. dia |
| 13 | Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required1) 2 x 16 sq. mm. / 4 x 16 sq. mm. |
