|
| 1 | Taking down cement or cement lime plaster on walls/ roof slab any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed. |
| 2 | Demolition of Brick Work/ stone work / concrete block wall built in Cement Mortar including all quoins, arches, pillars, etc. of any descriptions, complete all as specified and as directed. |
| 3 | M&L for precast cement concrete block masonry, type C-1 (1:3:6) (20 mm graded aggregate) with solid blocks, exc 10 cm in width and setting in CM 1:6 complete all as specified and as directed. |
| 4 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping, lintel upto 1.5 m claer span and similar other works including necessaryincluding weathering, slightly rounded or chamfered angles and throating and necessary form work complete all as specified and directed. |
| 5 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surface/ block masonary in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 6 | M&L for rendering on other than fair faces of brick work or concrete surface or block masonary, 15 mm thick in two layers of 10 + 5 mm in CM 1:4, top layer of 5 mm thick mixed with liquid water proofing compound as per manufacturer instructions finished the surface even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid seperately |
| 7 | Supply only liquid water proofing compound |
| 8 | M&L for applying one coat of alkali resistant primer on plasteredsurfaces of wall over 3 mm thick wall care putty and applying two coat of oil bound distemper including preparation of new surfaces complete all as specified and directed. |
| 9 | Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004 alkali and fungal resistance, dirt resistance exterior emulsion paint of required shade (Company Depot tinted) with silicon addtitives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10 Sqm etc on newly plastered surface of wall including preparation of surface complete all as specified. |
| 10 | M&L for hardcore of broken stone or boulder gauge n.exc. 63 mm deposited, spread & levelled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed. |
| 11 | M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in flooring finished rough to receive floor/screed complete all as specified and directed. |
| 12 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) 75 mm thick as in sub base or in levelling course, finishing the surface even and rough to receive floor complete all as specified and directed. |
| 13 | M&L for light shade vitrified ceramic tiles, double charged, first quality 10 mm thick(square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed. |
| 14 | M&L for light shade vitrified ceramic tiles, double charged, first quality 10 mm thick (square/rectangular) polished, to match floor tiles fixed on vertical surfaces such as dado, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including rendering 10 mm thick in cement mortar 1:3 finished rough to fix tiles complete all as specified and directed. |
| 15 | S&F powder coated aluminium snap grid frame work for false ceiling size of grid 605 x 605 mm, providing hangers 6 mm dia G.I (upto 1200 mm lenght) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60 mm long and expansion hold fastners 12.5 mm dia, 40 mm long and providing and fixing PVC insulation panels 10 mm thick with EPS stuck to 1 mm thick printed PVC sheet suitably placed in false ceiling grid complete all as specified and directed. |
| 16 | S&F rolled mild steel in roof trusses(framed), trussed purlins, crane gantries, rails and fastenings, MS pipe for post and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe- 290(Gde E-165) complete all as specified and directed. |
| 17 | M&L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 18 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 19 | M&L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed. |
| 20 | M&L for 40 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, both faces covered with decorative face veneer with lipping/frame to match including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed. |
| 21 | M & L for preparation of new or previously untreated wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. |
| 22 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in hold fast etc. including necessaryweathering, slightly rounded or chamfered angles and throating and necessary form work complete all as specified and directed. |
| 23 | M&L mild steel work as hold fasts and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed. |
| 24 | S&F 100 mm sizebutt hinges, cast brass, with mild steel hinge pin, bright polished, type B-11 and fixed completeall as specified and directed. |
| 25 | S&F 150 mm long Brass handles, cast type, polished bright completeall as specified and directed. |
| 26 | S&F 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete allas specified and directed. |
| 27 | S&F brass barrel tower bolt, with cast or sheet barrel and rolled or cast bolts, 150 mm long and fixed complete all as specified and directed. |
| 28 | S&F aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed. |
| 29 | S&F aluminium powder coated (thickness or powder coating not less than 50 micron) frame and shutters for doors/windows/ventilators, sliding/ fixed/ openable type complete with necessary fittings such as two concealedlock for each window, roller, hinges etc. wheel etc. including necessary arrangements to receive 4 mm thick glass or wire mesh with aluminium channel beading & stainless steelscrews complete all as specified and directed.Note : (a) The weight of rubber gasket beading will not be measured with the weight of aluminium shutters, glass will be measuerd and paid separately.(b)The rate quoted by the contractor shall also include necessary wheels for sliding shutters and hinges for side hung/top hung shutter as required at sight and concealed locks for windows. (c)The colour of powder coating shall be as approved by GE. |
| 30 | M&L for 4.8 mm thick sheet glass ordinary quality and fixed with oil putty or rubber beading, wooden/aluminium beads and provsion of glazing pins where required in squares not exceeding 0.50 Sqm in each pane fixed in wooden/ aluminium/ steel windows/ doors/ partition/ ventilators complete all as specified and directed.Note :- Aluminium glazing strip/ metal strip paid sepetately under respective item. |
| 31 | S&F Deco-104 (10 mm thick), aluminium powder coated grill and fixed to the existing window frame with and incl \"C/F/L\" channel (weight not less than 0.136 g/Rm) alround grill, CP brass/ stainless steel screw @ 200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles wherever required and fixing approved anodised aluminium standard section around the opening all complete all as specified and directed. |
| 32 | S&Faluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed. |
| 33 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed. |
| 34 | M&L for mild steel TMT bars 5 mm dia and over in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 35 | M&L for point wiring complete for one light/ fan/ exhaust fan point controlled by one, one way 5/6 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including minimum 20 mm dia \"medium grade\" PVC conduit ISI marked concealed in wall and fittings and modular metal flush box, modular white cover plate with frame, blanking plate and making good to the disturbed surfaces to match the existing complete all as specified and directed including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including making good disturbed surface to match the existing surface complete all as specified and directed.Note- (i) Rates include the cost of blanking plate, modular plate, modular boxes and covers of suitable modules as required at site.(ii) Modular box, plate and cover shall be of same make as of switch//socket/regulator. |
| 36 | All as per item No. 35 above but for one 5 pin 5/6 Amp socket outlet point on same board |
| 37 | All as per item No. 35 above but for one 5 pin 5/6 Amp socket outlet point on an independent board. |
| 38 | All as per Item No. 35 above but for one 6 pin 15/16 amps socket outlet point on an independent board with FRLS cables of size 4 Sqmm and green colour earth cable of size 4 Sqmm. |
| 39 | S&F modular type switch one way 6 Amps, 230 Volt, 1 Module complete all as specified and directed. |
| 40 | S&F modular type switch one way 16 Amps, 230 Volt, 1 Module complete all as specified and directed. |
| 41 | S&F modular type socket one way 6 Amps, 2/3 pin, 230 Volt, 2 Module complete all as specified and directed. |
| 42 | S&F modular type socket one way 6/16 Amps, 2/3 pin, 230 Volt, 2 Module complete all as specified and directed. |
| 43 | S&F ceiling rose, two or three terminal, surface bakelite 65 x 50 mm complete all as specified and directed. |
| 44 | S&F modular typefan regulator, electronic step type, 120 W, 2 Module complete all as specified and directed. |
| 45 | S&F MCB single pole 240 volts, \"C\" curve of rating from 16 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 46 | S&F MCB SPN 240 volts, \"C\" curve of rating 40-63 Amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 47 | S&F sheet metal enclosure MCB distribution board, double door with IP-43 protection single pole and neutral 240 volts, 12 way,including suitable size copper bus bar and metal door, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces complete all as specified and directed. |
| 48 | S&F round shape LED light, 15 W, 230 Volts recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including necessary electrical connection complete all as specified and as directed. |
| 49 | S&F polycarbonate surface mounted integrated type with 20 watt LED having minimum 100 lumens/watt electronic driver complete with all accessories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. |
| 50 | S&F brushless direct current (BLDC) ceiling fan 1400 mm sweep, 26 watt with service value 6.00 BEE, 5 star rating complete with blades and other accessories, single phase, 230 V and making connection with sheathed 3 core cable of size 0.75 Sqmm flexible copper conductor wire complete all as specified and directed. |
| 51 | S&F sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4 Sqmm nominal cross sectional area and one run of 4 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 32 mm PVC conduit and fittings concealed in wall/ roof/ floors/ ceiling etc. including cutting chases to walls for laying conduit wherever required and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.NOTE:- One unit length shall measured as two run of main wire, one run of earth wire and one run of PVC conduit |
| 52 | S&F PVC conduit of dia 20 mm, medium grade inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. but exclusive of boxes (junction/ terminal) complete all as specified and directed. |
| 53 | S&F telephone socket RJ-11, modular type, 1 module including modular metal flush box, modular white cover plate with frame and blanking plate wherever required complete all as specified and directed. |
| 54 | S&F information socket RJ-45, modular type, 1 module suitable for LAN cable including modular metal flush box, modular white cover plate with frame and blanking plate wherever required complete all as specified and directed. |
| 55 | S&F GI bracket made out of GI pipe 40 mm bore light grade bent to required shape of 1.20 mtr long and fixing to pole/wall with suitable size of nut, bolts and clamps made out of MS Flat 40 x 5 mm and including 2.50 m long copper conductor cable multistranded of 2.5 Sqmm PVC cable from overhead line to fitting connection box complete all as specifiedand directed. |
| 56 | S&F LED street light fitting 60 Watts, IP 66, having pressure die cast aluminium alloy housing with heat resistant toughned glass with individual peanut LED lenses and Driver shall be IP-67 for water protection, including surge protection device 5 KV and making electrical connection to the fitting with Suitable size of service wire complete as as directed. |
| 57 | M&L for earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mts deep below ground level with top edge of the plate not less than 1.50 Mtrs below ground level connected to glavanised iron Wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steelconnected to earthing test point all as specified incl 15 mm GI tubing medium grade and necessary fitting for protection of GI wire incl laying of charcoal dust and common salt in alternate layer, PCC Pit (1:3:6) type C-1 using 20 mm graded stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5 mm graded stone aggregate reinforced with 6 mm dia round bar @ 75 mm C/C both ways with MS handle 8 mm dia, plastering 15 mm thick CM (1:6) externally upto 150mm below ground level, GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh incl. excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate No. 3 of SSR Part (2009) and connected to earth test point incl testing complete all as specified an directed.Note:- The unit rate includes the cost of GI pipe medium grade for protection of earth wire and 4mm dia earh lead wire upto 7.5 M. |
| 58 | Supply and fixing in replacement of existing old un-serviceable Earth continuity GI wire of size 4 mm fixed to wall and batton or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other situation for loop earthing etc. complete all as specified and directed. |
| 59 | Supply and installing, testing, commissioning split AC unit indoor/outdoor, with cordless remote control unit and inbuilt air iodiser and plasma filter for better indoor air quality, minimum 3 star rating and ISEER rating of 3.80, 1.5 TR capacity with copper tubing condenser, low noise with 230 Volt range, LED display, anti-dust, antimicrobial protection, anti-corrosive coating, self diagnosis with all necessary fixing arrangements such as brackets etc. complete all as specified and directed.Make : Voltas Modal 18 H Vectra Platina/ Blue star Model IC318 MNU or equivalent in OGeneral/CarrierNote:- Extra copper tubing, water pipe, voltage Stabilizer etc. required to complete the installation will be measured and paid separately under respective items herein after. |
| 60 | S&F Voltage stabilizer 5 KVA capacity, single phase, naturally Air Cooled indoor type and designed for input variation between 170 V to 290 V with output voltage stabilized at 230 V with accuracy of + 2.5 % complete all as specified and directed. Make: V-Guard/MicroTek/Luminous |
| 61 | S&F sheet metal enclosures, single pole and neutral with a two pin and earth plug and socket, plug top and one single pole MCB 25 Amps, C series 240 V complete all as specified and directed. |
| 62 | S&F sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4 Sqmm nominal cross sectional area and one run of 4 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 32 mm PVC casing caping and fittings fixed on wall/ roof/ floors/ ceiling etc. including cutting chases to walls wherever required for laying casing caping and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.NOTE:- One unit length shall measured as two run of main wire, one run of earth wire and one run of casing caping. |
| 63 | S&F copper tubing soft grade suitable for split type AC suction /discharge line of size 5/8\" diameter all as directed. |
| 64 | S&F copper tubing soft grade suitable for split type AC suction /discharge line of size 3/8\" diameter all as directed. |
| 65 | S&F insulation for copper tubes of split type AC units, insulation type superlon of size 3/8\" diameter all as directed. |
| 66 | S&F insulation for copper tubes of split type AC units, insulation type superlon of size 5/8\" diameter all as directed. |
| 67 | M&L for 750 KVA capacityservo controlled voltage stabilizer (conforming as per BIS : 9815 : Part-1 : 1994 reaffirmed 2009) for automatic operation, three phase, naturally oil cooled, Unbalanced type, pure electrolyte copper wound, digital display, relay free smooth and silent operation designed for input variation Voltage between 360 V to 480 V with output voltage stabilized at 415 V with accuracy + 1 % and speed of correction 8 Volts per second phase to phase, 95 % efficiency, digital display Voltmeter/ Ampmeter, overload/ Short circuit protection, high/low voltage cut off, by pass arrangement in case of emergency, single phase sequence change protection including first filling of oil in servo Voltage stabilizer including testing on completion complete all as specified and directed.Make:- AE/ Vinitek/V Guard/Volina/ Sinetrac |
| 68 | S&L XLPE LT UG cable PVC insulated, beddedgalvanised steel strip or wire armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 630 Sqmm 3.5 core laid in trenches or fixed on wall/floor/poles complete all as specified and directed. |
| 69 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep in hard/dense soil for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out complete all as specified and as directed. |
| 70 | Excavation in trenches in soft/disintegrated rock, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out complete all as specified and as directed. |
| 71 | Supply & laying double walled corrugated (DWC) HDPE full rounded pipe conforming to IS 16205 Pt-24 of approved colour complete with fittings for cable protection of size 75 mm inner dia and 90 mm outer dia complete all as directed. |
| 72 | Returning filling in including spreading watering and well raming in layer excedding 25 cm each in any type of soil/rock complete all as specified and directed. |
| 73 | Removing excavated material (Soils/rock) to a distance not exceeding 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed. |
| 74 | M&L for GI tubing medium grade 80 mm bore for passing through cables laid under the floor, along the wall or along the pole complete all as specified and directed . |
| 75 | M&L for earthing complete with copper plate electrode 600mm x 600mm x 3.15 mm thick buried directly in ground (earth pit not less than 2.25 Mts deep below ground level with top edge of the plate not less than 1.50 Mtrs below ground level connected to copper earth strip 20 x 3 mm by means of bolts, nuts check nuts and washers of brass connected to earthing test point all as specified incl 25 mm GI tubing medium grade and necessary fitting for protection of GI wire, laying of charcoal dust and common salt in alternate layer, PCC Pit (1:3:6) type C-1 using 20 mm graded stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5 mm graded stone aggregate reinforced with 6 mm dia round bar @ 75 mm C/C both ways with MS handle 8 mm dia, plastering 15 mm thick CM (1:6) externally upto 150mm below ground level, GI funnel with 15 mm dia medium grade GI pipe for watering and wire mesh incl. excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate No 5 of SSR Part (2009) and connected to earth test point incl testing complete all as specified an directed.Note:- The unit rate includes the cost of GI pipe medium grade for protection of earth strip and earh strip upto 7.5 M. |
| 76 | S&F 20 x 3 mm copper strip earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required complete all as specified and directed. |
| 77 | Excavating in post holes(or similar holes) each n.exc 0.5 cum in soft/disintegrated rock, getting out, returning, filling in, watering and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed. |
| 78 | Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in soft/disintegrated rock complete all as specified and directed. |
| 79 | M & L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete complete all as specified and directed. |
| 80 | M & L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete complete all as specified and directed. |
| 81 | M&L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of anti corrosive paint over a coat of red oxide primer all as specified and directed. |
| 82 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even &smooth without using extra cement complete all as specified and directed. |
| 83 | M&L for applying two coats of cement base paint over a coat of alkali resistant primer on new surfaces of walls including preparation of surface complete all as specified and directed. |
| 84 | S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, ridge, hip and vally gutters, fixed with self tapping screws as specified complete all as specified and directed. |
