Tender For Development Of Stadium In Bohar, Rohtak - Leg Press (Both Side) 90 X20x75 Inches Equipment Made To Meet En 16630 ,Epoxy Coating Of 100 Microns Gi Main Post-Of:114 Mm Dia Pipe Thk. - 3.5 - 7.5Mm Self-Lubricating German Bearing And Reinforced Foo, rohtak-Haryana

Development Of Stadium In Bohar, Rohtak - Leg press (BOTH SIDE) 90 x20x75 inches Equipment made to meet EN 16630 ,Epoxy coating of 100 microns GI main post-of:114 mm Dia Pipe thk. - 3.5 - 7.5mm Self-lubricating German bearing and Reinforced foot pedals for extended life Non fading LLDPE and open ends of the pipe closed by GULLDPE caps High tensile steel with galvanized nut bolts are used for assembly. Self Explanatory stainless steel label fixed on equipment for ease of use. foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm .(colour Specified by Engineer-in-charge ) 2 AIR WALKER DIMENSIONS: - 1.72M (L) x 0.63M (W) x 1.75M(H) Sky Walker Equipment made from “B” class G.I. Pipe of different NB. 80mm NB made from “B” Class G.I. Material which is bend at the radius of 250mm. The leg movement frame is of 50 x 50mm x 3mm thick CRC square pipe. Sleeves are made up of 100 mm OD M.S. pipe with thickness 5mm. This results in easy replacement of bearings, bearings used are “6205zz” are permanent lubricated sealed bearing of reputed brand. Hightensile steel with galvanized nuts and bolts are used for assembly. The cerclips used for assembly are of A24 type. The powder coating is done with Pure Polyester powder of The powder coating is done with Pure Polyester powder of ,Ackzonoble or Berger. with 60 to 70 micron thickness foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge ) 3 HORSE RIDER DIMENSIONS: - 1.18M (L) x 0.4M (W) x 1.4m (H). Horse rider equipment made from “B” class G.I. 100NB made from “B” Class G.I. pipes welded with M.S. round plate of Ø250 mm and 10mm thick Seat provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 1.2 mm thickness and 20mm x 40mm CRC square pipes of 1.2mm thickness. The leg movement frame is of32NB made from “B” G.I. pipe. The handle frame is of 32 NB made from “B” Class G.I. pipe. The footrests are made from 25 NB “B” class G.I. pipe. Pins used of Diameter 17 mm are made up from bright material. The bearings used are “6203 ZZ” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts and bolts are used for assembly. The circlips used for assembly are of A24 mm. The powder coating is done with Pure Polyester powder of ,Ackzonoble or Berger.with 60 to 70 micron thickness foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge ) 4 CHEST PRESS DIMENSIONS: - 2M (L) x 0.71M (W) x 2.15M. (H). Chest press equipment made up of “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters The centerpipe is of 100NB made up of “B” Class G.I. pipe. The bottom welded with support of M.S. round plate of Ø250 mm and 10mm thickness. The connecting pipes are made up from 25NB “B” class G.I. pipe. The handle frame is made up from 32NB “B” class G.I. pipe. To build structure bushes are used which are made from MS seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. Closing Caps are made up of high quality Fiber reinforced Plastic material. Foundation cover Closing Cap is made from FRP Material with 0 The powder coating is done with Pure Polyester powder of ,Ackzonoble or Berger. with 60 to 70 micron thickness foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge ) 5 Suppling of FIH approved global category synthetic Hockey Turf Groud (Blue color)as approved by Engineer-in- Charge from FIH certified manufacturer complete as per DNIT Hockey Ground standerd national size 55MX91.4M=5027SQM . 6 Supply and installation of fully computerized ,automatic and single key operation pop -up sprinkler system minimum 6 No. specifically designed for synthetic sports hockey faces inlcuding all assessories complete as per DNIT 7 Supply and fixing of goal post of FIH approved drawing and design including all fitting and net complete in all respect as per DNIT 8 Supply and erection of LED floor light luminaires 500W of Crompton and as per FIH specifications minimum 300LUX shadowless light is required for practicing the game, complete as per DNIT (Crompton make only) 9 S/E of LED type aviation light -2 Nos. per mast required to complete the job in all respect upto the entire satisfaction of Engineer in charge of the work complete as per DNIT. Make Bajaj/GE/Phillips/Wipro/Surya

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	08-02-2025	Corrigendum	Technical Bid	11-02-2025

INR 20000 /-

INR 1950000.0 /-

INR 8.47 Crore /-