|
| 1 | Supply, Installation, Commissioning & Validation of cGMP model Pure Steam Generation (PSG) & distribution system at M/s. HOMCO, ValiyakalavoorPure Steam Generation Plant - Capacity 100kg/hr |
| 2 | Pure Steam Generation Plant - Capacity 100kg/hrPSG ColumnPSG PreheaterNon Condensable gases Remover (NCGR)Sampling CondenserInsulation Sight glass/View glassVent Filter Vent Filter CatridgePumpsValves & InstrumentsSS 304 Skid With Interconnecting PipingPLC Based Control Panel for Online Process Instruments sensors, Pumps, flow diversion valves with appropriate synchronized in SS304 Enclosure panel.On site Installation and commisioning Charges, DOCUMENTATION -DQ,IQ&OQ WITH TRAINING |
| 3 | Pipes & Pipe Fittings for Pure Steam Loop SystemSS 316L Pipe Stainless Steel bead removed tubes of Schedule 40 (Wall thickness around 1.6mm), material shall be as per ASTM A 270 TP 316L ERW , Internal finish shall be electro polished to better than 0.5 Ra & externally mirror polished to 180 grit |
| 4 | SIZE- 1.0\"OD |
| 5 | SIZE- ¾” OD |
| 6 | SIZE- ½” OD |
| 7 | Pipes & Pipe Fittings for Pure Steam Loop SystemSS 316L Elbow of Schedule 40 (Wall thickness around 1.6mm), made out of ASTM A270 TP 316L tube bead removed wall thickness to match with respective pipe wall thickness. Internal finish shall be electro polished to better than 0.5 Ra ASTM A270 TP 316L ERW & externally mirror polished to 180 grit |
| 8 | SIZE- 1.0\"OD |
| 9 | SIZE- ¾” OD |
| 10 | SIZE- ½” OD |
| 11 | Pipes & Pipe Fittings for Pure Steam Loop SystemSS316L TEE of Schedule 40 (Wall thickness around 1.6mm), made out of ASTM A270 TP 316L tube bead removed wall thickness to match with respectivepipe wall thickness. Internal finish shall be electro polished to better than 0.5 Ra ASTM A270 TP 316L ERW & externally mirror polished to 180 gritSize - ¾” |
| 12 | Pipes & Pipe Fittings for Pure Steam Loop SystemSS316L Unequal TEE of Schedule 40 (Wall thickness around 1.6mm), made out of ASTM A270 TP 316L tube bead removed wall thickness to match with respective pipe wall thickness. Internal finish shall be electro polished to better than 0.5 Ra ASTM A270 TP 316L ERW & externally mirror polished to 180 grit |
| 13 | Size - 1” x ½” |
| 14 | Size - 1” x ¾” |
| 15 | Pipes & Pipe Fittings for Pure Steam Loop SystemSS316L Reducer of Schedule 40 (Wall thickness around 1.6mm), made out of ASTM A270 TP 316L tube bead removed wall thickness to match with respectivepipe wall thickness. Internal finish shall be electro polished to better than 0.5 Ra ASTM A270 TP 316L ERW & externally mirror polished to 180 gritSize - ¾” x ½” |
| 16 | Pipes & Pipe Fittings for Pure Steam Loop SystemTC Gasket , MOC PTFE |
| 17 | SIZE- 1.0\"OD |
| 18 | SIZE- ¾” OD |
| 19 | SIZE- ½” OD |
| 20 | Pipes & Pipe Fittings for Pure Steam Loop SystemTC Clamp, MOC : SS304 , Standard : ASTM A270 |
| 21 | SIZE- 1.0\"OD |
| 22 | SIZE- ¾” OD |
| 23 | SIZE- ½” OD |
| 24 | Pipes & Pipe Fittings for Pure Steam Loop SystemTC Liner, MOC : SS316L |
| 25 | SIZE- 1.0\"OD |
| 26 | SIZE- ¾” OD |
| 27 | SIZE- ½” OD |
| 28 | Pipes & Pipe Fittings for Pure Steam Loop SystemHT class Nitrile rubber insulation up to 150 degree C |
| 29 | SIZE- 1\" |
| 30 | SIZE- ¾” |
| 31 | SIZE- ½” |
| 32 | Pipe in pipe insulation for POU Size- ¾” x 2.5” OD |
| 33 | Pipes & Pipe Fittings for Pure Steam Loop SystemSS 304 Pipe Holding Clamp |
| 34 | SIZE- 1.0\"OD |
| 35 | SIZE- ¾” OD |
| 36 | SIZE- ½” OD |
| 37 | Standard Support (SS 304)- Size -100 mm |
| 38 | SS 304 Studs Size- 100 / 50 mm |
| 39 | SS Anchor Bolt / panel bolt, Size- M10×75mm |
| 40 | MS Square Plate,Size-100×100×5mm |
| 41 | MS Anchor Bolt Size-M10×75mm |
| 42 | MS Angle, Size-40 × 40× 6 mm |
| 43 | Insulation Tape, Size- 3/4\" x 3.0\" OD |
| 44 | Pipes & Pipe Fittings for Pure Steam Loop SystemManual Diaphragm ValveType: Two Way Manual Diaphragm Valve , MOC: SS 316L (Base), MOC of Diaphragm: PTFE backed With EPDM, Operation: Manually Operated, Operating Pressure: Up to 16 bar, End Connection: TC End, Location: Inlet & At Condensate Drain Line Of Header & POU |
| 45 | SIZE- DN15 |
| 46 | SIZE- DN20 |
| 47 | SIZE- DN25 |
| 48 | Actuated Diaphragm Valve For Vent Filter Isolation :Type: Two Way Actuated Diaphgram Valve, MOC: SS 316L (Base), MOC of Diaphragm: PTFE backed With EPDM, Operation: Pneumatically Operated, Operating Pressure: Upto 16 bar, End Connection: TC End, Location: For Vent Filter Isolation Size- DN 15 |
| 49 | Vent Filter with Accessories :Type: Electrically heated Insulated & cladded, MOC: SS 316L, Temperature sensor: PT 100, 3 wire, Heater Make: Hot Watt, End Connection: TC End, Accessories: Temperature sesnsor with transmitter, Make: RadixSize- 10\" Long |
| 50 | Vent Filter Catridge :Type: Hydrophobic, MOC: PP/PTFE, Size: 10\" Long, End Connection: Code-7, Location: Inside the Vent FilterSize- 0.2 Micron |
| 51 | Pressure Gauge :Type: Bourdon Type, MOC: SS 316L, Range: 0 to 10 kg/cm2(g), Sensing Elemen: Bourdon Gauge, End Connection: TC End, Marking: White Background with Black Marking, Location: Pure Steam inletSize- 4\" Dial Size |
| 52 | Pressure Switch :Range: 0.2 to 3.0 bar, Contact System: Single Pole Changeover Switch (SPDT), MOC: SS 316, Power Supply: 24 VDC, Enclosure: IP 66, End Connection: TC End with Diaphragm SealSize- 0.2 to 3.0 bar |
| 53 | Temperature Sensor Cum Transmitter :MOC: SS 316L, Model: PT100, 3 wire Type, Size: 1/2\" BSP, Length: Approx. 50 mm, End Connection: TC End, Location: In pure steam line after vent filter, Temperature Range: 0 to 200 °CSize- 0 to 200 °C |
| 54 | Clean steam trap for condensate removal :MOC: SS 316L, Location: At condensate drain line, End Connection: TC EndSize- DN15 |
| 55 | Pipes & Pipe Fittings for Pure Steam Loop SystemClosed head orbital welding joints |
| 56 | SIZE- 1.0\"OD |
| 57 | SIZE- ¾” OD |
| 58 | SIZE- ½” OD |
| 59 | Hydro testing Size- 1’’,3/4’’,1/2’’ |
| 60 | PassivationSize- 1’’,3/4’’,1/2’’ |
| 61 | Boroscope Inspection (10% only)Size- 1’’,3/4’’,1/2’’ |
| 62 | Pipe erection /Laying of piping per inch meter |
| 63 | SIZE- 1.0\"OD |
| 64 | SIZE- ¾” OD |
| 65 | SIZE- ½” OD |
