Tender for Supply of material, design, erection, testing, commissioning forSOP to LIS Dheera I, II and III under HP SHIVA Project by providing 11 kV HT Line, 11/0.4 kV, 100 kVA Sub Station and 3 Phase LT Line in (E) Section Dheera under Electrical Sub Divisioon, HPSEBL Daroh. (SEOP-28/2024-25); 1 11KV HT Line 2 Prov.Steel Tubular pole 9 mtr.long 3 Prov.RCC Muff with concerete feeling 4 Prov. C.I.X-arm (2400x 100x50x5) mmx2x2 for Tri-pole Str. 5 Prov. C.I.X-arm (2400x 100x50x5) mmx2x6 for Double pole Str. 6 Prov. A.I. X-Arm (2800x50x50x6)mmx2 for guarding of T/P 7 Prov. A.I. X-Arm (2800x50x50x6)mmx6 for guarding of D/P 8 Prov. C.I.X-arm (1500x 100x50x5)x9 mm for Single pole 9 Prov. A.I. X-Arm (1800x50x50x6)x9 mm for guarding 10 Prov. A.I. Knee Bracing Set (750x50x50x6)x2x9 mm for single pole 11 Prov. A.I. X-Bracing Set (2800x50x50x6) (1500x50x50x6)x2x6 mm for Double poleStr. 12 Prov. A.I. X-Bracing Set (2800x50x50x6) (1500x50x50x6)x2 mm for Tri-PoleStr. 13 Prov. C.I. (2400x 100x50x5) mmx2x3 for GO Switch (Length 2x2400)mm 14 Prov. C.I. (2400x 75x40x6) mm for D.O Fuse Unit (Length 2x2400)mm 15 Prov. GO Switch Handle Supporting: Channel Iron(460x75x40x6)mm 16 Prov. Pin Insulator with pinhellically formed fitting 17 Prov. Discs Insulator set cleaves with tongue helically formed(Porcelain: 12 kV, BS, 90 KN) 18 Prov. H.T.Stay set Complete 19 Prov.Full Clamp for Stay Set 20 Prov. Half Clamp for Cross arms 21 Prov. H.T Earthing Set Complete 22 Prov. Stay wire 7/3.15 mm (@ 8.0 kg Per Stay set ) 23 Prov G.I.wire 8 SWG for guarding Across the road 24 Danger Plate ( 203x200x1.6mm) 25 Prov.Nut & Bolt( off sizes ) 26 Barbed wire 27 Aluminum Paint 28 Prov.AAAC 7/3.15mm ( 50mm2 ) 29 Prov. Eye Hook Bolt HT 8 Long 30 Prov. 11 KV GO Switch 31 Prov. DO Fuse unit 32 Prov. Egg insulator HT 33 Transportation Charges 34 Erection charges of AAAC 7/3.15 mm sq. i.e. Laying, Stringing and sagging, Binding with insulator for 35 11/0.4 KV 100 KVA S/Stn 36 11/0.4 KV 100 KVA Distribution Transformer 37 S/T Pole9Mtr. W/L 200 kg 38 RCC Muff 39 X-Arm {C.I. (100X50X6 mm) length 2800mm x2} for incomer line 40 M.S Angle Iron (50x50x6 mm) length (2800mm)x1 Nos. for LAs 41 X-Arm {C.I. (75x40x6 mm) length 2800mm x4} for supporting DO fuse unit & DO switch 42 Transformer Bed, Belting & Knee Bracing 43 X-Arm {C.I. (100X50X6 mm) length 2800mm x2} for Transformer Bed 44 X-Arm {C.I. (100X50X6 mm) length 460mm x2} for Supporting Main Channel of Transformer} 45 MS Angle Iron (50X50X6 mm) length 2800mm x2 46 MS Angle Iron (35x35X6 mm) length 460mm x2 47 MS Angle Iron (50x50X6 mm) length 950mm x2} for Bed Knee Bracing 48 Transformer LT Distt. Box and GO Switch fixing Assembly 49 MS Angle Iron (50x50x6 mm) length 2800mm x2 50 MS Angle Iron (50x50x6 mm) length 450mm x1 51 GO Switch Handle Supporting (C.I. 75x40x6 mm) length 460mm 52 G.O.Switch 400 Amp. 53 D.O.Fuse unit 54 Lightning Arrestors (Porcelain) 55 Disc Insulator with Fitting 56 HT Stay Set complete 57 Stay Wire 7/3.15 mm ( @ 8.0 kg Per Stay Set) 58 LT Distribution Panel Box with MCCB160 Amp. 59 Pipe Earthing 60 Half Clamp (M.S. Flat 50X6 mm) 61 Full Clamp (M.S. Flat 50X6 mm) 62 M.S. Nuts and Bolts (Off Sizes) 63 A. Thimble 64 A. Thimble 65 Danger Plate 66 Barbed Wire 67 LT Cable 3.5Cx70 mm2 Havells MR with 30% Discount 68 AAAC 7/3.15 mm 50mm2 conductor for earthing, connections and tapping 69 Energy Meter LT 3 Phase 4 wire CT Operated Static Trivector meter with Box (200/5A) 70 LT Switched capacitor 9 kVAr for 100 kVA (rate per kVAr) 71 Aluminium Paint. 72 Chain Link Fencing, Angle Iron, gate, etc. for Transformer fencing 73 Transporation Charges complete in all respect 74 Erection Chargescomplete in all respect 75 3-phase LT Line 76 Steel Tubular Pole 9 Mtr. Long 77 RCC Muff 78 Prov. MS C.I. X-Arm (4800x75x40x6)mmx5 79 Prov. Shackle insulator with D-Iron 80 Prov. Egg Insulator 81 Prov. Eye Hook Bolt 82 LT Earthing Complete 83 LT Stay Set Complete 84 Stay Wire 7/3.15mm @ 6.0Kg.Per Stay Set 85 Prov. GI wire 8 SWG 86 Prov. AAAC 7/3.15 mm (55mm2) 87 Prov. LT cable 3.5C 70mm2n Havells MR with 30% discount 88 Prov. LTAC Three Phase kWH Meter (10-60A) 89 Prov. LT cable3.5Cx35mm2 PVC (1.1kV, Al, Un Armour) 90 Prov. LT cable3.5Cx50mm2 PVC (1.1kV, Al, Un Armour) 91 Prov. Full Clamp 92 Prov. Spool tie 93 M.S Nuts & Bolts (off sizes) 94 Prov. LT Fuse unit complete in all respect (Divison PO Rate) 95 Prov. Aluminium Paint 96 Erection charges of AAAC 7/3.15 mm sq i.e string & sagging, binding with insulator for 0.200 km Ckt. I 97 Erection charges of AAAC 7/3.15 mm sq i.e string & sagging, binding with insulator for 0.200 km of IInd Ckt. 98 Erection charges of LT cable 0.250 mtr 99 Transportation Charges 100 Civil work 101 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : 102 For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 103 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) 104 Providing and fixing 12mm thick prelaminated particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. Pre-laminated particle board with decorative lamination on both sides 105 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 106 Quantities are mentioned above are tentative and Actual Quantity shall be worked out after Check Survey to be carried out by the successful Tender and detailed Engineering and finalization of Tower location Chart.Payment shall be made as per Approved Bill of Material/Actual Quantities measured at site.
