Tender For Annual Plan-Kodur Gp-24-25-Sheet For Kuttasherikkulamb School-Pro No.123/25-General Civil Work - Appendix A 2 2.8.1:Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceedi
Tender Overview
Project Description
Annual Plan-KODUR GP-24-25-Sheet for Kuttasherikkulamb School-PRO NO.123/25-General Civil Work - Appendix A 2 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 3 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns 4 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 5 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 6 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 7 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 8 OD230642/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size ,shape and pitch of corrugation as approved by Engineer-in-charge)0.35 mm(+0.05%),total coated thickness with zinc coating 120grams per sqm as per IS:277,in 240 mpa steel grade ,5-7 microns epoxy pimer onm both side of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meters or as desired by Engineer-in-charge .The sheet shall be fixed using self drilling /self trapping screws of size (5.5x55mm) with EPDM seal,complete up to any pitch in horizontal /vertical or curved surface ,excluding the cost of purlins,rafter and trusses and including cutting to size and shape wherever required. 9 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 10 OD230643/2024-2025:Providing and fixing 150 mm semi circular PVC 4kgf/cm2 rain water gutter pipe with iron bracket with 25x5 mm size flat ,screw and washer etc .,including making necessary connections with rain water pipe etc. complete. 11 12.41.1:Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter 12 OD297838/2024-2025:Providing and fixing Granite of any colour and shade for name board ,of required size laid over base of cement mortar 1:4(1 cement : 4 coarse sand ),including all charges etc.complete at all ,levels ,including lettering & amp ;fixing .
BOQ
| Sl. No. | Item Description |
| 1 | Appendix A |
| 2 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 3 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns |
| 4 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 5 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 6 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 7 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 8 | OD230642/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size ,shape and pitch of corrugation as approved by Engineer-in-charge)0.35 mm(+0.05%),total coated thickness with zinc coating 120grams per sqm as per IS:277,in 240 mpa steel grade ,5-7 microns epoxy pimer onm both side of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meters or as desired by Engineer-in-charge .The sheet shall be fixed using self drilling /self trapping screws of size (5.5x55mm) with EPDM seal,complete up to any pitch in horizontal /vertical or curved surface ,excluding the cost of purlins,rafter and trusses and including cutting to size and shape wherever required. |
| 9 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 10 | OD230643/2024-2025:Providing and fixing 150 mm semi circular PVC 4kgf/cm2 rain water gutter pipe with iron bracket with 25x5 mm size flat ,screw and washer etc .,including making necessary connections with rain water pipe etc. complete. |
| 11 | 12.41.1:Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter |
| 12 | OD297838/2024-2025:Providing and fixing Granite of any colour and shade for name board ,of required size laid over base of cement mortar 1:4(1 cement : 4 coarse sand ),including all charges etc.complete at all ,levels ,including lettering & amp ;fixing . |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender