Public Administrative Department Government Departments Closing in 0 days TDR #47441545

Tender For Annual Plan-Kodom Belur Gp Pro No :55/2024-25-Construction Of Mini Mcf At Thattummal-General Civil Work

Issued by Government Departments · belur, Kerala
Tender Value
4.44 Lakhs
Estimated cost
Bid Submission
04 Feb 2025
0 days left
EMD
11119
Bank guarantee accepted
Document Fee
985
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
belur → Kerala
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Annual Plan-KODOM BELUR GP PRO NO :55/2024-25-Construction of Mini MCF at Thattummal-General Civil Work

BOQ

Work Name:Annual Plan-KODOM BELUR GP PRO NO :55/2024-25-Construction of Mini MCF at Thattummal-General Civil Work
Sl. No. Item Description
1MINI MCF AT KOTTAPARA
22.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
32.7.1:Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock
4OD315159/2024-2025:od1554142/2021_2022 : Laterate masonry with neatiy dressed latrate ston e of sixe 35*20*20cm nearest sixe in cement mortor foundation and besement including all cost of materials labour charges etc
5OD315160/2024-2025:od1336471/2021_2022 :Laterite neatly dressed stones of size 35x20x20 cm or nearezt size in cement mortar1:6 for superstructure above plinth level up to floor two level including cost of materials labour charges etc.complete. (Modified 50.6.7.2)
62.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
74.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
811.20.3:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary cement
913.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
1013.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
11OD315161/2024-2025:Steel work for purlin /single section with MS TUBES including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
1210.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1312.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
1412.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)
15OD315158/2024-2025:Supplying and fixing 150mm dia pvc rain water gutter semi circular section circular includding fitting with MS flat supporters at 1m intervaletc.complete
1613.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

AI Tender Summary

OUR REF NO 47441545
AUTHORITY Government Departments
TENDER VALUE 4.44 Lakhs
LAST DATE 04-02-2025
Authority
Authority Name Local Self Government Department
Work Description Tender For Annual Plan-KODOM BELUR GP PRO NO :55/2024-25-Construction of Mini MCF at Thattummal-General Civil Work
Basic Detail
Tender No AE/LSGD/KB/TEN/03/2024-25
Bidding Type Tender
Location
City belur
State Kerala
Key Dates
Publish Date 28 Jan 2025
Submission Date 04 Feb 2025
Open Date 05 Feb 2025
Finance
Tender Value 4.44 Lakhs
Tender Fee 985
EMD 11119
Exemption Available
Document List
c2cdd2e4-1406-49e8-98ec-4d05955f578c.html
BOQ_1166589.xls
PAGENO..pdf
sbd.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jan 28, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 04, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 05, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

c2cdd2e4-1406-49e8-98ec-4d05955f578c.html

xls

BOQ_1166589.xls

PAGENO..pdf

pdf

sbd.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender