|
| 1 | Excavation for foundationin earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. ( By /manaual Means ) |
| 2 | Excavation for foundation in hard rock by blasting including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. |
| 3 | Providing and laying in situ/ready mix / ready mix M10 cement concrete of trap / granite/quartzite /gneiss metal in foundation including necessary centering, formwork ,bailing outwater, compacting and curing et complete. (with fully automatic micro processor based PLC with SCADA enabled with rever sibled rumty pemixer / concrete batch mix plant(pan mixer)with natural /artifical sand) |
| 4 | Providing cast in situ / ready mix M 10 grade cement concrete for head walls of CDwork /retaining walls etc including necessary formwork,compaction, finishing and curing etccomplete. (with reversible drum type mixer / concrete batch mix plant (panmixer) withSCADA with fine agreegates ofrequired specifications (Natural sand / VSI sand finelywashed etc ), cement 4.05 bags/cumt) |
| 5 | Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 1200 mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 6 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm.Layers including watering and compacting etc. complete. |
| 7 | Providing dry/trap/ granite/ quartzite/ gneiss rubble stone soling 15 cmto 20 cmthick including hand packing and compacting etc. complete. |
| 8 | Providing and laying in situ/ ready mix M 20 CC of trap /granite/ quartzite/ gneiss metalfor wearing course 8 cm thick including compacting,finishing,curingandfillinginjoints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant/pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) |
| 9 | Providing and fixing 25 mm diameter steel anchor dowel in hard rock including drillinghole of 3 2mm diameter up to 0.75 mtrs depth, placing the dowel inposition andeffectively grouting the hole with CM 1:1 proportion etc. complete. |
| 10 | Providing,cutting,bending,hooking, tyingand laying in position TMT FE 500 steel barsfor reinforcement for all RCC works as per detailed drawings etc. complete. |
| 11 | Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing forabutment returns, return walls etc. Complete. |
| 12 | Providing and fixing Road junction / Information sign board of size 0.90 m x0.60 m. prepared on16 gaug eM.S. sheet with angle iron frame of size 35 x 35 x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green / whiteback ground and back side gray stovee namelled,bonded with red retro reflective sheet Engineering grade, border / letters /numeral / arrows, coated with non pealable crystal clear protective coat retaining 100%reflection including twoangle ironpost of size5 x 50 x 5 mm of 3.65 mlong in flated atbottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I.bolts and nuts of size10 mm dia.and 20 mm longsheet and angle ironpost inonepiecewithout joints includingall taxes, conveying,fixinging round with cement concrete 1:4:8 block of 60 cm x 60cm x75cm size as directed by Engineer-in-chargeetc.complete.Mild Steel Board with Engineering Grade. |
| 13 | Test reports - Coarse aggregate- Gradation, water apsorption, Flakiness index, Fine aggregate - fineness modulus -stilt factor- sulphate & chioride, Basic cement test, sieve analysis, liquid limit & plastic limit etc |
| 14 | Royalty |
