|
| 1 | GASKET ## FOR VICTOLIC COUPLING OF COAL PIPE,DIA 508 MMAdditional Data:MOC: SILICON RUBBER. |
| 2 | O-RING SIZE:75MM IDX3.5MM DIA #Additional Data:MOC:VITON RUBBER |
| 3 | HOSE,LUB. OIL WITH END FILTTINGS #L-900 MM,Q-15 LPM,PR.-5 KG/CM# FOR IDF & PAF LUB.OIL SYSTEMAdditional Data:SS BRAIDED, SIZE:3/8\" |
| 4 | HOSE FOR PIPING,D-12 MM,LENGTH-1000 MM FOR BALL MILL 10E10 HOSE FOR PIPING DIA.-12 MM LENGTH-1000 MM END TO SUIT 3/8\" BSP FOR RODASRAM LOADING CYLINDEROF 10E10 COAL MILL.Additional Data:MOC:SS BRAIDED. ALSO WILL BE USED FOR ID FANBRG LO SYSTEM. |
| 5 | HOSE,SS BRAIDED L:500MM FOR PIPE OD-12MM FORRODASRAM LOADING CYLINDER OF BALL MILL 10E10END TO SUIT 3/8 INCH BSP THREADAdditional Data:MOC:SS BRAIDED. ALSO WILL BE USED FOR ID FANBRG LO SYSTEM. |
| 6 | HOSE,MILL LOADING CYLINDER FOR BALL MILL 10E10 LOADING CYLINDER L-470MM,END TO END 520 MM,NB 4.5 MM,PR.- 100KSC,TEMP.- 100 DEG.CEN.,END FITTING(SS316) WITH FLEXIBLE TYPE WIRE BREADED NYLON JACKE T,OD 9MMAdditional Data:SIZE:1/4\". ALSO WILL BE USED FOR FD FAN LO &SERVO SYSTEM. |
| 7 | O-RING SIZE 7.75MM IDX1.95MM DIA #MATERIAL:VITON RUBBER# FOR BALL MILL RELIF VLV |
| 8 | RUBBER PAD [DRG. NO-WBPDCL/BKTPP/BM/131] FORBALL MILL 10E10MATERIAL: NEOPRENE RUBBER |
| 9 | HOSE,LUB. OIL #L-850MM,NB 25,25 KSC,100# FOR FD FAN(TYPE-AP120/12) SERVO SYSTEM |
| 10 | SS HOSE,1/2\"X613 ## FOR OIL LINE OF OIL GUN |
| 11 | RUBBER SI-BASED GASKET FORMED ## FOR VITOLIC COUPLING OF COAL CARRYING PIPEOD-6Additional Data:GASKET FOR VICTOLIC COUPLING OF COAL PIPE DIA:660 MM, MOC: SILICON RUBBER |
| 12 | O-RING,ID-29.5MMXCD-3.5MM,VITON |
| 13 | O-RING,SIZE:130.2 MM IDX2.8 MM DIA ## FOR BALL MILL LUB OIL PUMPAdditional Data:MOC:NEOPRENE RUBBER |
| 14 | O-RING,SIZE:151 MM IDX7.6 MM DIA ## FOR PA FAN LOP COOLERAdditional Data:MOC:NEOPRENE RUBBER |
| 15 | O-RING D55X3 FOR FD FAN AP1 20/12 SERVO MOTORASSYAdditional Data:MOC:VITON RUBBER |
| 16 | O-RING,(70X3)MM FOR FD FAN SERVO MOTOR ASSYAdditional Data:MOC:VITON RUBBER |
| 17 | O-RING,SIZE-ID202X8 MM,MATERIAL-VITON ## FOR FD FAN COOLER |
| 18 | O-RING,ID-21.9MMXCD-3.5MM,VITON |
| 19 | OIL SEAL SIZE-70X90X13 FOR CLEAN OUT CONVEYER36 \" GRAVEMETRIC COAL FEEDER |
| 20 | SEAL,OIL SEAL,SIZE-40X62X08 MM FOR CLEAN OUTCONVEYOR GEAR BOX |
| 21 | OIL SEAL TYPE A DIA 35XDIA 52X7 -10 FOR COC(B0246) DRIVE OF FEEDER OF STG-II |
| 22 | OIL SEAL TYPE A DIA35XDIA58X7 -10 FOR COC (B0246) DRIVE OF FEEDER OF STG-II |
| 23 | OIL SEAL TYPE A DIA40XDIA62X7 -12 FOR COC (B0246) DRIVE OF FEEDER OF STG-II |
| 24 | SEAL,GREASE #OF 36in GRAVIMETRIC COAL FEEDER# FOR inCOAL ONBELTin ROLLERAdditional Data:Size-28X47X7 mm.Material-Viton Rubber |
| 25 | CIRCLIP,EXTERNAL,SIZE: 15X1.0 MMSPEC. CONFORMING TO DIN471 IS 3075 |
| 26 | CIRCLIP,EXTERNAL,SIZE: 35X1.5 MMSPEC. CONFORMING TO DIN471 IS 3075 |
| 27 | HOSE,LUB. OIL FOR BALL MILL 10E10SIZE-L-1230 MM,Q-46 LPM,5KG/CMAdditional Data:SS FLEXIBLE HOSE,WIRE BREADED, L=1230MM,FLOW=46PLM, PRESSURE-5KG/CM2, 100DEG C., HOSEDIA-50MM WITH END FITTINGS (FEMALE SWIVEL TYPE) |
| 28 | HOSE,LUB OIL FOR BALL MILL 10E10L-770 MM,Q-68 LPM,PR.-5 KSC,TEMP.-100 DEG. CENAdditional Data:SS FLEXIBLE HOSE, WIRE BREADED, L=770MM,FLOW=46PLM, PRESSURE-5KG/CM2, 100DEG C., HOSEDIA-65MM WITH END FITTINGS (FEMALE SWIVEL TYPE) |
| 29 | HOSE, SS-304 FLEXIBLE, OD=50MM, ID=42MM,, WIRE BREADED, LENGTH=300MM WITH BOTH ENDFLANGE FITTINGS.FLANGE DIA=126MM, THK=12MM,HOLE DIA=14.8MM, NO OF HOLES=4, PCD=98MM |
| 30 | O-RING,ID-34MMXCD-4MM,NEOPRENE |
