|
| 1 | Supply of 16 M high mast shaft in two sections suitable for 44m/sec wind speed, with raising lowering system comprising, head frame, luminaires carriage suitable to install 08 nos luminaires in symmetric arrangement, double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, juntion box, lightening finial complete as required. |
| 2 | Supply of foundation bolts manufactures from special steel alongwith nuts, washers, anchor plate and common template .. etc as required. |
| 3 | Supplying, Installation, Testing & Commissioning ofIntegral 300W LED flood light with driver inside a PDC housing with suitable fixing accessories accessorieson the luminaire carriage in high mast pole by giving suitable connections etc. as required. |
| 4 | Supply & installation of TWIN/DOUBLE DOME GLS type aviation obstruction light complete as required. . |
| 5 | Supplying of outdoor stand mounted feeder pillar with 32A FP MCB and 40A RCCB incomer, single dial time switch, 32A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, incoming 25sqmm and outgoing 16 & 2.5 sq. mm terminals complete as required. |
| 6 | Construction of shallow foundation with M20 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour complete as required. . |
| 7 | Erection of the high mast with the help of suitable tools and plants, wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5 sq. mm, lugs, MCB and all labour complete as required. |
| 8 | Supply of PVC insulated and PVC sheathed XPLE power cable of 1.1 KV grade armoured UG aluminium conductor cable conforming to IS 7098 part 1 with up-to-date amendment of the following size as required.(Approved make:CCI/Omega/PolyCab/Finolex/Havells/V-Gaurd/Universal) 4 × 16 sq.mm |
| 9 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.up to 35 sq.mm. |
| 10 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 11 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm (28mm) |
| 12 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 13 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from FRLSom earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 14 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 15 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I.pipe from earth electrode including connection with G.I. nut,bolt, spring, washer excavation and re-filling etc. as required. |
| 16 | Supply and running of 3 core 2.5 sqmm flexible copper cable & connection of the fixtures as required. |
| 17 | Installation of the mast feeder pillar by grouting the stand in concrete as required. |
| 18 | Execution of Soil bearing test for foundation of 1 nos of highmast pillars at the site complete as required. |
