|
| 1 | Karingattumjal Erambra Myloor Ayiroorthadam Olikkottupadi Sangamam Kaval Antony Kavala Kadumpidy Road - 8012m |
| 2 | CLEARING AND GRUBBING |
| 3 | Clearing Grass and Removal of Rubbish - Clearing grass and removal of rubbish upto a distance of 30m outside the priphery of the area as per technical specification Clause 200.1 |
| 4 | Cutting of Trees including cutting of Trunks, Branches and removal of Stumps- Cutting of trees, including cutting of trunks, branhes and removal of stumps and roots, refilling, compaction and backfilling and stacking of servicable material by manual means with all liftsas per technical specification Clause 201.1 -Girth above 300mm to 600mm - Lead upto 100m |
| 5 | PAVEMENT COMPONENTS |
| 6 | Scarifying Existing Bituminous Surface to a depth of 150mm - by Mechanical Means - Scarifying the existing granular surafce to a depth of 150mm and disposal of scarified material with a lift upto 3m and lead upto 1000m as per technical specification Clause 301.4.1 |
| 7 | Dismantling of structures- Dismantling existing structures like culverts, bridges, retaining walls and other structures comprising of masonry, cement concrete, woodwork, steelwork, including T&P and scaffolding whereever necessary, sorting the dismantled material, disposal of unserviceable and stacking serviceable material with all lift and lead of 1000m as per technical specification Clause 202.1 -Reinforced Cement Concrete (RCC) - By Mechanical Means |
| 8 | Dismantling Stone Masonry- Dismantling existing structures like culverts, bridges, retaining walls and other structures comprising of masonry, cement concrete, woodwork, steelwork, including T&P and scaffolding whereever necessary, sorting the dismantled material, disposal of unserviceable and stacking serviceable material with all lift and lead of 1000m as per technical specification Clause 202.1 - Dry Rubble Masonry |
| 9 | Dismantling flexible Pavements- Dismantling of flexible Pavements and disposal of dismantled material upto a lead of 100m, stacking serviceable and unserviceable materials seperately by Mechanical means as per technical specification Clause 202.3 - Bituminous Courses |
| 10 | Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 |
| 11 | Construction of embankment with approved material deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Table 300.1 and 300.2 as per technical specification Clause 301.5 |
| 12 | Granular Sub-base with Well Graded Material (Table 400.1)By Mix in Place MethodConstruction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with vibratory roller 8 tonne to achieve thedesired density, complete as per Technical Specification Clause 401. (For Grading I Material) |
| 13 | Granular Sub-base with well graded material (Table 400.1)-By Mix in Place Method- For Grading I material -Construction ofgranular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotovator at OMC, and compacting with Vibratory Roller 8 TONNE to achieve the desired density as per technical specification Clause 401 - Using Departmental Material |
| 14 | Wet Mix macadam -providing, laying, spreading and compacting stone aggregates of specified sizes to wet mixmacadam at OMC in mechanical mixer (pug mill), carriage of mixed material by tipper to site,layingin uniform thickness in sub-base / base course on a well prepared sub-base and compactingwith vibratory roller 8 tonne to achievethe desired density including lighting, barricading and maintenance of diversion etc as per table 400.11 & 400.12 and as per technical specification Clause 406 |
| 15 | Wet Mix macadam -providing, laying, spreading and compacting stone aggregates of specified sizes to wet mixmacadam at OMC in mechanical mixer (pug mill), carriage of mixed material by tipper to site,layingin uniform thickness in sub-base / base course on a well prepared sub-base and compactingwith vibratory roller 8 tonne to achievethe desired density including lighting, barricading and maintenance of diversion etc as per table 400.11 & 400.12 and as per technical specification Clause 406 |
| 16 | BITUMINOUS WORKS |
| 17 | Prime Coat - Low porosity- [roviding and applying prime coatwith bitumen emulsion (Bulk SS1) on prepared surface of granular base including cleaning road surface and spraying primer at a rate of 0.70-1.00 kg/sqm using mechanical means as per technical specification clause 502 |
| 18 | Tack Coat - Providing and applying tack coat with bitumen emulsion (Bulk RS-1) using emulsion distributorat a rate of 0.25 - 0.30 kg/sqmon the prepared granular surface treated with primer &cleaned with Hydraulic broom as per technical specification clause 503 |
| 19 | Mix Seal Surfacing - Manual Means - Type A - Providing, laying and rolling of close-graded premix carpet of 25mm thickness composed of 11.2mm to 0.9mm (Type-A) or 13.2mm to 0.9mm (Type-B) aggregates either using penetration grade bitumento required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kn roller, finished to required level and grades as per technical specification clause 509- UsingBitumen Bulk S-65 by Manual Means |
| 20 | RIGID PAVEMENT (Interlocking Work and CC Pavement) |
| 21 | Taking out existing CC interlocking paver blocks from footpath/central verge,including removal of rubbish etc;disposal of unserviceable material to the dumping ground,for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Enginer in Charge |
| 22 | Laying old cement concrete interlocking paver blocks of any design/ shape laid inrequired line, level, curvature, colour and pattern over and including 50 mm thickcompacted bed of coarse sand, filling the joints with fine sand etc. all completeas per the direction of Engineer-in-charge. (Old CC paver blocks shall besupplied by the department free of cost.) |
| 23 | Supplying and laying interlocking tile 100 mm or nearest size thickness, minimum strength M 40 including providing a layer of 6 mm aggregate for 5 cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc.; complete. |
| 24 | PCC Grade M 20 - Providing concrete for plain/reinforced concrete for wearing coat complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:2:4 |
| 25 | Cement Concrete Pavement - Construction of un-reinforced dowel jointed at expansion and construction joint only,plain cement concrete pavement ,thickness as per design,over a prepared sub base,with 43 grade cement or any other type as per clause 1501.2.2 M 30 (grade),coarse and fine aggregates conforming to IS383,maximum size of coarse aggregate not exceeding 25 mm,mixed in a concrete mixer of not less than 0.2cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork spreading the concrete with showels,rakes,compacted using needle, screed, and plate vibrators and finished in continuous operation including provision of contraction and expansion ,construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge /culvert and construction joints, admixtures as approved,curing of concrete slabs for 14 days,using curing compoundand water finishing to lines and grade as per drawing and TechnicalSpecifications clause 1501 |
| 26 | Construction of un-reinforced plain cement concrete pavement, thickness as per design,over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 M30(grade), coarde and fine aggregates conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork(steel channel, laying and fixing of 125 micron thick polythene film, wedges,steel plates including levelling the formwork as per drawing),spreading the concrete with showels,rakes,compacted using needle,screed, and plate vibrators and finished in continuous operation including provision of admixtures as approved,curing of concrete slabs for 14 days,using curing compound(where specified) and water finishing to lines and grade as per drawing and Technical Specifications clause 1501. Short panelled of size 0.75m x 0.75m (Modified item 6.4). Extra labour and machinery added for close joint cutting |
| 27 | Boundary Piller- Reinforced cement concrete M15 grade boundary pillers / local stone of standard design as per IRC:8 fixing in position including painting and priming etc.as per drawing and technical Specification clause 1704 |
| 28 | Sign Boards and KM Stones |
| 29 | Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per drawings and Technical Specification Clause 1701English and Roman |
| 30 | Providing and fixing of retro-reflectorised logo board at different locations of roadasper IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 1701- 600mm x 600mmsize logo and sign board of 1100x300mm |
| 31 | Retro-reflective Traffic Signs - Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign asper IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixedover aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 1701- 900mm equilateral triangle board |
| 32 | Traffic Signs- Retro-reflective Traffic Signs - Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign asper IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixedover aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 1701- 600mm circular board |
| 33 | Providing and fixing of typical PMGSYinformationboardas per specifications and drawing. Two vertical 75mm square,12 SWG MS tubes of length 290cm with two identical horizontal tubes of length 100cm make the frame for the board. GI sheets of 870x635x1.6 mm welded toMS angle iron frame of 25mm x 25mm x 5mm andstiffened with 25x25x5mmfixed to the ftube frame with 50x50x5mm steel plate makes the information area.The tube posts duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm, 800mm below ground level. All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 34 | Providing and fixing of typical PMGSY Citizens\" informationboardas per specifications and drawing. Two vertical 75mm square,12 SWG MS tubes of length 290cm with two identical horizontal tubes of length 100cm make the frame for the board. GI sheets of 870x635x1.6 mm welded toMS angle iron frame of 25mm x 25mm x 5mm andstiffened with 25x25x5mmfixed to the ftube frame with 50x50x5mm steel plate makes the information area.The tube posts duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm, 800mm below ground level. All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 35 | Providing and fixing of typical PMGSY Maintenance boardas per specifications and drawing. Two vertical 75mm square,12 SWG MS tubes of length 290cm with two identical horizontal tubes of length 100cm make the frame for the board. GI sheets of 870x635x1.6 mm welded toMS angle iron frame of 25mm x 25mm x 5mm andstiffened with 25x25x5mmfixed to the ftube frame with 50x50x5mm steel plate makes the information area.The tube posts duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm, 800mm below ground level. All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 36 | Kilometre Stone- Reinforced cement concrete M15 grade kilometre stone / local stone of standard design as per IRC:8 fixing in position including painting and priming etc.as per drawing and technical Specification clause 1703 - 5th Kilometre stone (pre-cast) |
| 37 | Reinforced cement concrete M15grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 |
| 38 | Reinforced cement concrete M15grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 |
| 39 | Traffic Signs- Retro-reflective Single Chevronof 50cm x 60cmsize - Providing and fixing of retro-reflectorised Object hazard markersign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 1701 |
| 40 | Painting Lines, dashes, Arrows etc on Road in two coats on new work- Painting lines, dashes, arrows etc on roads in two coats with ready mixed road marking paints conforming to IS:164 on bituminous/concrete surface , including cleaning of surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and technical Specification clause 1702. Over 10 cm in width. |
| 41 | Traffic Signs- Direction and place identification sign upto 0.90 sqm size board - Retro - reflective Traffic Signs -Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on 2 inch dia GI Pipe firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approveddrawing and Tehnical Specification Clause 1701. |
| 42 | Traffic Signs- Retro-reflective Object hazard marker of 450mm x 900mm size - Providing and fixing of retro-reflectorised Object hazard markersign asper IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixedover aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 300mm x 300mm x 450 mm, 450 mm below ground level as per drawings and Technical Specification Clause 1701 |
| 43 | CD WORKS |
| 44 | Excavation for Structures -Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material : Ordinary soil : Upto 3 m depth |
| 45 | RING BUND Type - 1 - Putting up of ring bund as per approved shape 2.50 m bottom width, 1.00 m top width and average height of 2.00 m using empty gunny bag/ Polythene bags filled with earth placed in 2 rows at 0.6m apart and filled in between with puddle clay to form bund including labour charges for dismantling the bund after completion of the work etc complete. |
| 46 | Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete |
| 47 | PVC WHEEP HOLES - Providing weep holes using 75mm dia PVC pipes 4 kg/sq cm including cost of material , labour charges etc. complete |
| 48 | Dry rubble packing including all cost,conveyance,labour charges etc complete |
| 49 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203, P.C.C grade M 10 |
| 50 | PCC Grade M 15 - Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:2.5:5 |
| 51 | Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204, P.C.C grade M 15 |
| 52 | PCC Grade M 20 - Providing concrete for plain/reinforced concrete for wearing coat complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:2:4 |
| 53 | Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5, R.C.C grade M 20 for bed block |
| 54 | Supplying, fitting and placing TMT bar reinforcement in substructure - complete as per drawings and technical specifications Clauses 1002, 1005,1010 and 1202 |
| 55 | RCC Grade M 25 - Providingand laying reinforced cement concrete in superstructure complete as per drawings and technical specifications Clause 800, 1205.4 and 1205.5 -upto 5.00mtr Height |
| 56 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 57 | Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 |
| 58 | Providing and Laying RCC pipe NP4 as per design in single row -Providing and laying RCC pipe NP4 culverts on first class bedding of granular material in single row with cement mortar 1:2 but excluding excavation, protectio works, backfilling, concrete and masonry works in head walls and parapets as per technical specification clause 1106 : 750mm Dia |
| 59 | Painting Two coats on New Concrete Surfaces - Painting two coats icluding primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and technical Specification |
| 60 | PROTECTION WORK |
| 61 | Excavation for Structures -Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material : Ordinary soil : Upto 3 m depth |
| 62 | DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site |
| 63 | DR with DepartmentalRubble - Dry rubble without concrete levelling course using departmental rubble including packing to compactness to lines and levels, labour charges etc. complete as per direction of Departmental officers at site |
| 64 | PCC Grade M 20 - Providing concrete for plain/reinforced concrete for wearing coat complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:2:4 |
| 65 | Guard Stones- Reinforced cement concrete M15 grade guard stonesof size 20x20x120cm size embedded in PCC 1:4:8 block of 45x45x45cm sice with 30cm embedding of stones including painting etc. complete. |
| 66 | DRAIN WORKS |
| 67 | Surface Drains in Soil- Construction of unlined surface drains of average cross sectional area 0.40sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3.0m and lead of 50m as per technical specification Clause 307 - By Mannuall Means |
| 68 | Excavation in roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5m and lead up to 50m as per technicalspecification clause302.3 For Foundation |
| 69 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (M-10) |
| 70 | Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 PCC Grade M-15 |
| 71 | PCC Grade M 20 - Providing concrete for plain/reinforced concrete for wearing coat complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:2:4 |
| 72 | Total Construction cost |
| 73 | Maintenance for 5 years |
| 74 | Maintenance for first Year after completion |
| 75 | Maintenance for second Year after completion |
| 76 | Maintenance for third Year after completion |
| 77 | Maintenance for fourth Year after completion |
| 78 | Maintenance for fifth Year after completion |
| 79 | Total Maintenance cost |