Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions complete allas specified and as directed. |
| 2 | Material and Labour for brick work with sub class \"B\" brick straight of curved on plan exc 6m mean radius built in CM (1:6) complete allas specified and as directed. |
| 3 | Material and Labour for Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete allas specified and as directed. |
| 4 | Demolition of cement concrete (reinforced) in any position (below or above G.L) etc complete all as specified and as directed. |
| 5 | Material and Labour for RCC (Nominal Mix) in type-B1 1:2:4 (20mm graded stone aggregate) Beams cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed. |
| 6 | Material and Labour for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc complete all as specified and as directed. |
| 7 | Material and Labour for mild steel TMT bars of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia all as specified and as directed. |
| 8 | Demolition of cement concrete (unreinforced) ofany descriptions, below or above ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete allas specified and as directed. |
| 9 | Material and Labour for PCC (1:4:8) type D-2(using 40mm graded stone stone aggregate) as in sub base of flooring and foundation filling and mass concrete complete allas specified and as directed. |
| 10 | Dismantling of floor hearth or wall tiling incl cement mortar bedding ( but not backing) and removing debris and rubbish off the premises complete allas specified and as directed. |
| 11 | Material and labour for Non-Skid ceramic coloured tiles as in floor 7 to8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and as directed |
| 12 | Material and labour for Non-Skid ceramic coloured tiles7 to8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles fixed over and including 10 mm thick cement plaster for backing coat in CM (1:4) complete all as specified and as directed. |
| 13 | Material and labour for Glazed ceramic coloured tilesof size (450x300x7-8) mm thick in verticle surfaces set andjointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles fixed over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed. |
| 14 | Material and labour for Double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular) polished area of each tiles not exceeding 0.36 sqm as in floor set and jointed in neat cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 15mm thick screed bed in CM (1:6)complete all as specified and as directed. |
| 15 | Material and labour for Double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles fixed over and including 10mm thick cement plaster in CM (1:4) for backing coat complete all as specified and as directed . |
| 16 | Material and labour for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 17 | Rounding to edges of stone slabs one edge, such as in steps, coookingplatformand other similar situations complete all as specified and as directed. |
| 18 | Taking down cement plaster on brick or stone walls and ceiling etc including racking out joints, hacking for Key, scrubbingdown with water etc complete all as specified and as directed. |
| 19 | Material and labourfor 15 mm thick renderingon fair faces of brick work in cement mortar (1:6) andfinished the surfaceseven and smooth without using extra cement upto 12 storeys bldgs complete all as specified and as directed. |
| 20 | Material and Labour for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick walls or concrete surface, finishing even and smooth (without using extra cement)etc including necessary working platform upto 12 storeys bldgs complete allas specified and as directed. |
| 21 | Material and labour for 15mm thick rendering in cement mortar (1:4) on other than fair faces of brick work or concrete surfaces finished even and fair without using extra cement including necessary scaffolding upto 12 storeys bldgs complete all as specified and directed. |
| 22 | Material and labour for 5mm thick renderingin cement mortar (1:3) on concrete surface as in ceiling andfinished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 23 | Taking down chowkats or frames withshutters (without taking off shutters from the frame)not exc 1.5 Sqm each and removing from site complete all as specified and as directed. |
| 24 | Supply and fix2nd class hard wood plain solid straightchowkats and frames, wrought,framed rebated on the solid rounded or chamfered put together with Glue, pinnedat joints complete all as specified and directed. |
| 25 | Supply and fixing mild steel flat iron of size 25x3 mm or equivalent as required for hold fasts and clamps & similar small articles confirming to Fe-410-O or Fe-310-O upto 12 storied bldg complete all as specified and as directed. |
| 26 | Supply and fix 30 mm thick flush shutters, solid core construction,with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 27 | Supply and fix for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match, reinforced with MS Square tube in opening all as shown on drawing upto 12 storied bldg complete all as specified and as directed. |
| 28 | Supply and fix for factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing and as directed. |
| 29 | Supply and fix for 75mm size stainless steel butt hinges medium weight, cold rolled complete all as specified and as directed. |
| 30 | Supply and fix Stainless steel butt hinges medium weight 100mm size etc complete all as specified and as directed. |
| 31 | Supply and fix 125mm long aluminium anodised extruded handles fabricated type, complete all as specified and as directed. |
| 32 | Supply and fix aluminum anodised barrel tower bolt of extruded section 150 mm size complete all as specified and as directed. |
| 33 | Supply and fix Aluminium anodizedbarrel tower bolts, extruded section 200mm long complete all as specified and as directed. |
| 34 | Supply and fix for aluminium sliding door bolt 300mm long, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed. |
| 35 | Supply and fix Powder coated aluminiumsliding windows for three track with rubber gasket, stopperpowder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 80mmX25mmX1.55mm andshutter of section 20mm X20mm X1.55mm incl ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including taking down old steel windows with necessary all fittings complete all as per manufacturer\"s instructions and all as specified and as directed. |
| 36 | Taking up or down 15 mm dia old steel water tubing and connections in any position complete all as specified and as directed. |
| 37 | Taking up or down 20 mm dia old steel water tubing and connections in any position complete all as specified and as directed. |
| 38 | Supply and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and as directed |
| 39 | Supply and laying for 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and as directed |
| 40 | Material and labour Cutting grooves/chases in cement concrete or brick wall / floor for taking down of GI pipe line and making goodthe disturbed surfaces to match with existing specification complete all as specified and as directed. |
| 41 | Supply and fix in repair vitreous China white wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts including PVC seat cover and making all necessary connections complete as directed. |
| 42 | Supply and fix in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and as directed. |
| 43 | Supply and fix in repairs Vitreous China wash basin ( white), flat back, size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and as directed. |
| 44 | Supply and fix in repair 15mm bore Brass CP bibcock fancy type long body with crutch or butterfly handle complete all as specified and as directed. |
| 45 | Supply and fix in repair 15mm bore Brass CP angular type stopcock with crutch or butterfly handle complete all as specified and as directed. |
| 46 | Supply and fix in repair PVC connection 15 mm sizepipe withPTMT nut of Length 600mm complete all as specified and as directed. |
| 47 | Supply and fix in repair 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot\" or ‘Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 48 | Supply and fix in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood, fancy boarder all around glass and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 49 | Supply and fix in repairs towel rail of brass chromium plated tube 19 to 20 mm dia 600 mm long `D\" type with brass chromium plated screw complete all as specified and as directed. |
| 50 | Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. Make: Prayag or equivalent make as approved by GE |
| 51 | Supply and fix in repair brass CP toilet paper holder to wall with chromium plated brass screws complete all as specified and as directed. |
| 52 | Supply and fix in repair brass CP health faucet with chromium plated brass screws etc complete all as specified and as directed. |
| 53 | Material and labour preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 54 | Material and labour preparation of old treated/decorated surfaces of wall by washing, rubbing down and stopping old distempered and painted surface and applying one coat of oil bound distemper etc all as specificed and as directed. |
| 55 | Material and labour preparation of newly plaster surfaces of ceiling surface and applying three coats of white wash complete all as specified and as directed. |
| 56 | Material and labour preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and as directed. |
| 57 | Material and labour preparation of newly plaster surfaces of wall and applying two coats of Exterior Acrylic Emulsion paint over a coat of alkali resistant primer on external surface including nescessary scafolding upto 12 story bldg complete all as specified and as directed. |
| 58 | Material and labour for preparation on new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer upto 12 storey bldg complete all as specified and directed. |
| 59 | Material and labour preparation of old surfaces of wall and applying one coat of Exterior Acrylic Emulsion paint on external surface incl nescessary scaffolding for any storey bldg complete all as specified and as directed. |
| 60 | Material and labour 3 mm thick wall care putty on wall/ceiling complete all as specified and as directed. |
| 61 | Material and labour preparation of old treated/decorated surfaces of wall by washing, rubbing down and stopping old painted surface and applying one coat of cement base paint etc all as specificed and as directed. |
| 62 | Material and labour two coats of synthetic enamel paint to woodensurfaces (frame & shutter) over a coat of pink primer incl preparation of wooden surface of any description, not otherwise described, over 10cm width or girth complete as specificed and as directed. |
| 63 | Material and labour preparation of old painted surfaces of wood and wood based surfaces of anydescription over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 64 | Material and labour preparation of old painted surfaces of steel & iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed. |
| 65 | Supply and fix for Vitreous China urinals, Half Stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortarn (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and Union for discharge pipe including Waste coupling, Urinal Spreader of PTMT of any colour fixed with 15mm dia pipe(Exclusive of fixing trap and waste pipe) complete all as specified and as directed. |
| 66 | Supply and fix for Vitreous china urinal partition white of size (310x700) mm complete all as specified and as directed. |
| 67 | Supply and fix Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC fillets of width 35mm with interval of 500mm in both horizonatal and vertical directions including necessary caping/beading/fillets at top and junctions or any other locations required as per site etc complete all as per specified and as directed. |
| 68 | Excavation in trenches not exc 1.5 mtr wide and not exc. 1.5 mtr deep for foundation in soft/loose soil & getting out complete all as per specified and as directed. |
| 69 | Returning filling in trenches including spreading leveling and well ramming with water complete n.exc 25 cm thick in each layer in soft/loose soil complete all as per specified and as directed. |
| 70 | Removing excavated soil n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point complete all as per specified and as directed. |
| 71 | Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as per specified and as directed. |
| 72 | Material and labour for mild steel TMT bars 6 to 8mm dia cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as per specified and as directed. |
| 73 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as per specified and as directed. |
| 74 | Use and waist of form work to sides of pillars posts columns footing etc complete all as per specified and as directed. |
| 75 | Material and labour RCC (1:1.5:3) type A-1 using 20mm graded stone stone aggregate as in foundations,including rafts,footings,foundation beam, baces of column under reamed pile and mass concreten walls,beams and columns etc complete all as per specified and as directed. |
| 76 | Supply and fix MS screw bolts (machine made) with hexagonal or square heads at one end and screwed the other,or screwed both ends,each screwed end to be fitted with washers and one hexagonal or square nut, but lenth of bolt exc 22.5 cm but n exc 30 cm & 20mm dai complete all as per specified and as directed. |
| 77 | Supply and fix MS Plates (plaines or chequered) square cut or notched (forming holes with riveted, bolted attechment) 300x300x8 at bottom & 200x200x8 at top GDE Fe 410-S complete all as per specified and as directed. |
| 78 | Supply and fix steel work in tabular truss and tubular post including special shaped washer etc complete using ERW or induction butt welded tubes conforming IS:1161-1979 grade St-240 complete all as per specified and as directed. |
| 79 | Supply and fix for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet manglore tile pattern profile 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping srews complete all as per specified and as directed. |
| 80 | Supply and fix for pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall for rain water pipe, fixed with self tapping srews all as specified and as directed. |
| 81 | Material and labour 25mm thick PCC (1:2:4) type B-1 using 20mm graded stone stone aggregate as in bedding of tiles/kota stone complete all as specified and as directed. |
| 82 | Material and labour for Non-Skid ceramic coloured tiles as in floor 7 to8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and as directed |
| 83 | Material and labour for Non-Skid ceramic coloured tiles7 to8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles fixed over and including 10 mm thick cement plaster for backing coat in CM (1:6) complete all as specified and as directed |
| 84 | Material and labour for broken stone boulders Hard core, broken to gauge n exc 63 mm, deposited, spread and levelled in layered n.exc. 15cm thick, watered and rammed to a true surfaces complete all as specified and as directed. |
| 85 | Material and labour for 75 mm thick PCC (1:4:8) Type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed . |
| 86 | Material and labour for 25mm or 50mm thick sand cusion under layer of floor complete all as specified and as directed |
| 87 | Material and labour for 60 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and pigment complete all as specified and as directed. |
| 88 | Material and labour for providing factory made 75 mm thick precast RCC cover slab of 3 MT load bearing capacity confirmingto IS : 12592 (Grade M-30) complete all as specified and directed. |
| 89 | Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer upto four storey bldg complete all as specified and as directed. |
| 90 | Material and labour for PCC 1:3:6 Type C2 using 40mm graded stone stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed. |
| 91 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out and removing soil to a distance n exc 50 m and making good surface in any type of soil complete all as specified and as directed. |
| 92 | Supply and fix MS section for post and strutsin roof shade, fencing including cutting tops to shape as directed drilling holes etc and simmilar work including all nesecery work conforming to FE-290 Gde E-165 complete all as specified and as directed. |
| 93 | Supply and fix in repairs of Polycarbonatesheeting with side lap fixed with coach screw and washer in roof, wall etc with wind ties by L-type or J-type or cranked hook bolts etc including wind ties and connected fittings complete all as specified and as directed. |
| 94 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry and laid dry and pointed complete all as specified and directed |
| 95 | Material and labour for 16-18mm Marble work (table rubbed and polished) for wall lining (veneering to wall) over and including 15mm thick cement plaster (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of Austrich Marble complete all as specified and as directed. |
| 96 | Material and labour 100 mm thick Cement concrete type C-2, (1:3:6) (40mm graded stone aggregate) as in Sub-Floors, Sub-Bases, Floors and pavings, etc all as specified and as directed. |
| 97 | Material and labour for 20mm thick pre-polished cement concrete designed coloured pavement/Chequered tiles having area of each tile not exec 0.16 Sqm in size glossy finish as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 98 | Material and labour for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging including sliding door tower bolt handle hinges all necessary joinary; also fastening and fixing complete all as specified and as directed. |
| 99 | Material and labour decorative wallpaper over a coat of primer on wall surface complete all as specified and as directed. |
| 100 | Supply and fix powder coated aluminium Partition wall / Fixed window partition of framesize 80mm x 38mm x 2.00 mmwith extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions complete all as per manufacturer\"s instructions and complete all as specified and as directed |
| 101 | Supply and fix 5.5 mm plain sheet glass ordinary quality and glazed with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions etc area of glass not exc 0.5 sqm each pane complete all as specified and as directed. |
| 102 | Supply and fix 6 mm Plywood, grade BWP, type BB fixed with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions including circular cutting to board/ plywood and waste complete all as specified and as directed. |
| 103 | M&Lin repair 9 mm thick prelaminated partilce boards interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame for pelmet boxes,aluminium door and aluminium partions , fixed in repair complete al as specified. |
| 104 | Material and labour Preparation of old decorated surfaces of wall and stopping of painted surface and applying one coat of interior plastic emulsion paint complete all as specified and as directed . |
| 105 | Material and labour Preparation of old decorated surfaces of ceiling and stopping of painted surface and applying one coat of interior plastic emulsion paint complete all as specified and as directed. |
| 106 | Material and labour two coats oflacquer based polish to existing wooden surfaces over 10cm width/girthincluding complete removal of existing finish using emery paper of suitable grade,making the surface smooth using good putty complete all as specified and directed. |
| 107 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3) (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 108 | Material and labour for preparation of new concrete surfaces over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 109 | Material and labour for providingPCC (1:2:4) Type B1 using 20mm graded stone aggregate as in coping and like including weathering, slightlyrounded or chamferred angles and throating complete all as specified and as directed. |
| 110 | Material and labour for Rendering 15mm thick in CM (1:6) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 111 | Material and labour for Double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles exceeding 0.42 sqm but not exc 1.00 Sqm as in floor, laid over and including screed bed or bedding layer 15 mm thick in cement mortar (1:6) etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles complete all as specified and directed. |
| 112 | Material and labour for Double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles exceeding 0.42 sqm but not exc 1.00 Sqm as in skirting etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles fixed over and including 10 mm thick in cement plaster (1:4) complete all as specified and directed. |
| 113 | Supply and fix 18 mm thick Plywood, grade BWP, type BB, fixedwith screws to timber/aluminum frame work etc complete all as specified and as directed. |
| 114 | Supply and fix 0.9 mm thickdecorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instruction complete all as specified and as directed. |
| 115 | Supply and fix stainless steel hydraulic hinges fixed to cabinets etc complete all as specified and as directed. |
| 116 | Supply and fix for Brass Locks, cupboard, grade I, size 50 mm two levers all as specified and as directed. |
| 117 | Supply and fix telescopic chanels of any length fixing to cabinets for drawers etc complete all as specified and as directed. |
| 118 | Supply & fix100 mm long Brass handles, cast type, polished bright complete all as specified and as directed. |
| 119 | Material and labour Complete removal of existing treatment of walls, ceiling and applying two coats of distemper oil emulsion over 3mm thick wall care putty (two coats) includingnecessary priming coats complete all as specified and as directed. |
| 120 | Taking down carefully copper/aluminium point wiring (light,fan,socket etc.) complete including fittings such as switch, ceiling rose, light fittings, regulators etc. and making good to the disturbed surface of walls, floors etc. all complete as specified and directed. |
| 121 | Material and labour as in repair / replacement for point wiring for one light/ bell/ fan controlled by one number one way switch complete with 1100 V grade FRLSH PVC insulated multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through and including PVC concealed conduit pipe of suitable size minimum 20mm dia medium grade ISI Marked complete with one run of 1100 V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn ofMS sheet pressed sunken box not less than 1.12 mm thickconcealed on wall, with 3 mm thick laminated sheet top cover ISI marked (Make: Hylum/Anchor/Orient) for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed.Note : Proper colour code of wiring to be maintained. |
| 122 | All as per item No.121 here in before but for 5 Amps Socket on same board complete all as specified and directed. |
| 123 | All as per item No.121 here in beforebut for 5 Asocket point on independent board complete all as specified and directed. |
| 124 | All as per item No.121 here in before but for 15 A socket point independent with 2.5 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and as directed. |
| 125 | Supply and fix Piano switch flush type single pole one way 5 Amps, 230 V complete all as specified and as directed. |
| 126 | Supply and fix Socket flush type, 2 in 1 multipurpose, 6 Pin, 5 Amps and 15 Amps complete all as specified and as directed. |
| 127 | Supply and fix Socket flush type 2 in 1, 5 Pin, 5 Amp complete all as specified and as directed. |
| 128 | Supply and fix Switch piano flush type, single pole one way 15 Amps, 230 V complete all as specified and as directed. |
| 129 | Supply and fix Ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, 230 V complete all as specified and as directed. |
| 130 | Supply and fixLED light fitting wit high out put diffuser 2 feet, 10 watt 220 V AC decorative type with inbuilt driver and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make- Havells (Cat No-LUMILINEBS10WLED865SPCWH)/ Baja (Cat No- BCLSB10WWH)/ Crompton (Cat No- CCS-103-10-65-SL-DP-NWH) |
| 131 | Supply and fixLED tube light fitting 4 ft 20 watt, 230 volt energy efficient comprises of extruded PVC housing, with in built driver and PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.all as specified and directed. Make- Havells (Cat No- LUMILINEBS20WLED830SPCWH)/ Bajaj (Cat No- BCLSB20WWH)/ Crompton (Cat No – CCS-103-20-65-SL-DP-NWH) |
| 132 | Supply and fix as in repair SPN MCB DB 8 way with Amps rated copper bus bar, neutral link, suitable for mounting MCB\"s 240 volts double door type including taking down old one and making good the disturbed surface complete all as specified and as directed by the Engr-in-Charge.Make : ABB /Legrand/ Havells/L&T/Schineider. |
| 133 | Supply and fix MCB 06 Amps to 32 Amps, single pole, 240 Volt \"C\" series, breaking capacity 10 KA complete all as specified and as directed. Make : ABB /Legrand/ Havells/L&T/Schineider. |
| 134 | Supply and fix MCB 06 Ampsto 32 Amps, SPN, 240 Volt \"C\" series, breaking capacity 10 KA complete all as specified and as directed. Make : ABB /Legrand/ Havells/L&T/Schineider. |
| 135 | Material and labour for making hole on wall for exhaust fan of size 300mm and making good distrubed surface all as directed. |
| 136 | Supply and fix exhaust fan, steel body AC single Phase 230V of size 300m sweep with, blades, and frame and louvers. Make-Crompton/Bajaj/Havells |
| 137 | Material and labour for point wiring for one light/ bell/ fan controlled by one number one way switch for 5Amps SSC complete with 1100V grade FRLSH PVC insulated unsheathedmultistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through in and including PVC concealed conduitof suitable size (minimum 20mm dia medium grade ISI Marked) complete with one run of 1100V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn of modular type galvanizedMS sheet pressed sunken box not less than 1.00 mm thick concealed on wall including fixing of modular cover plate of suitable modules with fixingscrews, for fixing of modular type switches / socket/ Fan regulator etc.complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and as directed.Note : Proper colour code of wiring to be maintained. |
| 138 | All as per item No. 137 here in before but for 5 Amps Socket on same board complete all as specified and directed. |
| 139 | All as per item No. 137 here in before but for 15 Amps Socket on same board complete all as specified and directed. |
| 140 | All as per item No. 137 here in before but for 5 Asocket point on independent board complete all as specified and directed. |
| 141 | All as per item No. 137 here in before but for 15 A socket point independent with 2.5 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and as directed. |
| 142 | Supply and fix Modular type switch, one way 6 Amps , 1 module complete all as specified and as directed. |
| 143 | Supply and fix modular type socket 5 pin, 6 Amps2 module complete all as specified and as directed. |
| 144 | Supply and fix Modular type socket 5 pin, 16 Amps 2 module complete all as specified and as directed. |
| 145 | Supply and fix Modular type switch, one way 16 Amps, 1 module complete all as specified and as directed. |
| 146 | Material and labour for circuit/sub-main wiringwith two run of 1100 V gradePVC insulated & unsheathed 4.0 Sqmm single core multi stranded copper conductor cable alongwith one run of4.0 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn throughconcealed PVC conduit complete all as specified and as directed. Note : (i) Three runs of 4.0 Sqmm cable shall measured as one length. |
| 147 | Material and labour for of sub-main wiringwith two run of1100 V grade FRLSH PVC insulated & unsheathed 6.0 Sqmm single core multi stranded copper conductor cablealongwith one run of6.0 Sqmm 1100 V grade PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through existingconcealed steelconduit or PVC conduitcomplete all as specified and as directed. Note : (i) Three runs of 6.0 Sqmm cable shall be measured as one length. |
| 148 | Supply and fix 20mm dia rigid non-metallic PVC conduit (Medium grade) for laying/fixing of LAN / Internet cablecomplete all as specified and as directed. |
| 149 | Supply and fix Modular type fan regulator step type(2 module)120 Watt.Make:-Legrand/Anchor(Roma)/Crabtree |
| 150 | Material and labour modular white Cloured/cover plate with frame 8 module including taking down of old one complete all as specified and directed.Make:-Legrand/Anchor(Roma)/Crabtree |
| 151 | Material and labour modular white cloured/cover plate with frame16module including taking down of old one complete all as specified and directed.Make:-Legrand/Anchor(Roma)/Crabtree |
| 152 | Material and labour modular white cloured/cover plate with frame 12 module including taking down of old one complete all as specified and directed.Make:-Legrand/Anchor(Roma)/Crabtree |
| 153 | Material and labour modular Metal flush box 16 module complete all as specified and as directed.Make:-Legrand/Anchor(Roma)/Crabtree |
| 154 | Supply and fix modular Metal flush box 12 module complete all as specified and as directed.Make:-Legrand/Anchor(Roma)/Crabtree |
| 155 | Supply and fix modular Metal flush box 8 module complete all as specified and as directed.Make:-Legrand/Anchor(Roma)/Crabtree |
| 156 | Supply and fix as in repair SPN MCB DB 8 way with Amps rated copper bus bar, neutral link, suitable for mounting MCB\"s 240 volts double door type including taking down old one and making good the disturbed surface complete all as specified and as directed. Make : ABB /Legrand/ Havells/L&T/Schineider. |
| 157 | Taking down of indoor unit of existing split AC and refixing at new location in same room and connecting the copper pipe, insulation, reffiling of gas (including supply of Material)etc all as directed. |
| 158 | Material and labour modular coloured/white cover plate with frame 2 module including taking down of old one complete all as specified and as directed. |
| 159 | Material and labour modular metal flush box 1 / 2 module including taking down of old one complete all as specified and as directed. |
| 160 | Supply and fix modular type 32 A Motor starters (for AC) white colour complete all as directed. |
| 161 | Supply and fixin repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with inbuilt driver,suitable for roof ceiling including connecting up with driver three core flexible copper conductor wire of suitable size complete all as specified and as directed.Make : Crompton , Cat No. : LCTLRNE-36-FO-CDL Havells (CAT No- VPLANO2X2PLR36WLED840S)/Bajaj (Cat No- BZRSQL36L LED GX CW)/ORIENT (Cat No-LTRAQ36CVO) |
| 162 | Materials and labour for earthing as in repair complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 32 x 6mmby means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded stone aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed. |
| 163 | Supply, installatioin, commissioning and testing of Split type Air Condtioner of 1.5 TR (4535 Kcal/Hr) capacity, Digital inverter type, complete with cordless remote control unit with LCD/LED display, minimum 3 star rating and EER of 3.2 and above. Indoor unit Hi wall mounted type suitable for 230 volts, 50 Hz, single phase AC supply and capable of performing the function as cooling , heating, air circulating and filtering. Outdoor unit of the air conditioner shall be fitted with discharge cool type rotary/ scroll compressor operating on non-CFC refrigerantswith over load protection and mounted on resistant mountings for quite operation. The filters packs provided shall be washable. Remote cordless controlshall be provided with ON/OFF timer, fan speed selector (min 3 speed), mode selector (cooling/fan) and setting -up of temperature. Display of temperature and mode shall be provided on indoor unit and on handset. Overall power factor of the unit shall not be less than 0.85 at operating conditions. Note :- The installation shall include mounting/ fitting indoor and outdoor unit on wall with suitable bracket etc. at respective locations. Laying refregerent piping, extension of drain pipeupto 6 mtr length and connecting both units after drilling holes, putting PVC sleeve, sealingand finshing the same duly matched with adjoining surface. Refrigerant pipeshall be insulated with expanded polythylene foam not less than 5mm thick.Leak testing of the entire system after installationto be carried out. Rate quoted will include Charging refrigerant gas in the unit, suitable electric connection between indoor and outdoor unit (upto 6 mtr)and upto switch (upto 3 mtr)(Make : VOLTAS / HITACHI / DAIKIN ) |
| 164 | Supply, installatioin, commissioning and testing of Split type Air Condtioner of 1.0 TR (3023 Kcal/Hr) capacity, Digital inverter type, complete with cordless remote control unit with LCD/LED display, minimum 3 star rating and EER of 3.2 and above. Indoor unit Hi wall mounted type suitable for 230 volts, 50 Hz, single phase AC supply and capable of performing the function as cooling , heating, air circulating and filtering. Outdoor unit of the air conditioner shall be fitted with discharge cool type rotary/ scroll compressor operating on non-CFC refrigerants (like R410 A or equivalent)with over load protection and mounted on resistant mountings for quite operation. The filters packs provided shall be washable. Remote cordless controlshall be provided with ON/OFF timer, fan speed selector (min 3 speed), mode selector (cooling/fan) and setting -up of temperature. Display of temperature and mode shall be provided on indoor unit and on handset. Overall power factor of the unit shall not be less than 0.85 at operating conditions. Note :- The installation shall include mounting/ fitting indoor and outdoor unit on wall with suitable bracket etc. at respective locations. Laying refregerent piping, extension of drain pipeupto 6 mtr length and connecting both units after drilling holes, putting PVC sleeve, sealingand finshing the same duly matched with adjoining surface. Refrigerant pipeshall be insulated with expanded polythylene foam not less than 5mm thick.Leak testing of the entire system after installationto be carried out. Rate quoted will include Charging refrigerant gas in the unit, suitable electric connection between indoor and outdoor unit (upto 6 mtr)and upto switch (upto 3 mtr) (Make : VOLTAS/ HITACHI / DAIKIN ) |
| 165 | Material and labour modular white cover plate with frame 3 modulecomplete all as specified and directed. |
| 166 | Material and labour modular metal flush box 3 moduleone omplete all as specified and directed. |
| 167 | Supply and fix modular type mini MCB 25Amp SP C Series 3 KA white complete all as specified and directed. |
| 168 | Supply and fix modular type 25 A Motor starters white colour complete all as specified and directed. |
| 169 | Supply and fix modular type 10/25 A 3 Pin Shuttered Socket white colour complete all as specified and directed. |
| 170 | Supply and fix 25 A 3 pin plug top complete all as specified and directed. |
| 171 | Supply and laying out of copper refregerent pipe 5/8\" dia with PUF insulation as per required length at site complete with brazing and flaring nuts of suitable size (brass) all as specified and directed. |
| 172 | Supply and laying out of copper refregerent pipe 1/4\" dia with PUF insulation as per required length at site complete with brazing and flaring nuts of suitable size (brass) all as specified and directed. |
| 173 | Supply and laying out of suitable size of drain out pipe of indoor unit of Split AC completeall as specified and directed. |
| 174 | Material and labour for circuit/sub-main wiringwith two run of 1100 V gradePVC insulated & unsheathed 2.5 Sqmm single core multi stranded copper conductor cable alongwith one run of2.5 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn throughsuitable size of PVC conduit for connection from MCB DB to switch bd complete all as specified and as directed. Note : (i) Three runs of 2.5 Sqmm cable shall measured as one length. |
| 175 | Supply and fix PVC insulated RoundPVC sheathed unarmoured copper 1.5 sqmm 3 core cable for separate electric connection of AC-1 building\"s existing Flood lights complete all as specified and directed. |
| 176 | Supply and fix Wall mounted fan of sweep 300mm elegently desined of round shape with pull cord control for speed and oscillation complete all as spd and directed. |
| 177 | Supply and fix heavy duty Exhaust fan, Steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers complete all as specified and directed. |
| 178 | Supply and fix Pedestal fan of sweep 400mm silent operation , elegently desined of round shape, colour in whige along with remote control complete all as specified and directed. |
| 179 | Supply and fixing LEDflood light of Ingress protection level of 66 with front toughen glass luminaries of capacity 50 watt with efficiency 120lm/watt , uniform light distribution, higher spacing between lights maintenance free systemcomplete all as specified and as directed. |
| 180 | Supply and fix PVC insulated 2.5 Sqmm single 2 core copper cable for connection of flag post complete all as specified and directed. |
| 181 | Supply and fix Flag Post light 12 Watt in red colour complete all as specified and directed.Note: Works against all items contained in the BOQ have to be carried out upto and including 12th floor of the Bldgs and quoted rates shall be deemed to be included to this factor |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
