|
| 1 | Knowledge Resource Centre |
| 2 | Library Books stackMain Section: Steel Double faced library stack with 14 Shelves colour shell white: Overall Height of Book Stacks-2285mm,with Width of Basic Section with Sides-985mm,Width of Basic Section Without Sides-935mm, Depth of Double faced stacks-550mm,width of Shelves-880mm,Depth of Shelves-230mm. |
| 3 | Library Books stack (Add-on Section) Steel double faced library stack with 14 shelves color shell white : Width of Add-on Section-885 mm. Width of Shelves-880mm. Depth of Shelves-230mm. |
| 4 | Book Supporter |
| 5 | Women Studies Centre |
| 6 | Non magnetic Chalk Board-single side Generic name : Chalk Board Other name: Green Board ,Black Board. Slate Writing Board Colour. Green material :non –magnetic Usable Side Single Side Size:5x4 ft |
| 7 | Garden Section |
| 8 | Officer ChairExecutive chair high back.Executive high back chair, with center tilt mechanism, tilt locking, rear side of seat and back covered with ABS shell, dual layered PU foam cushion.Overall Size: H:105-117.5 x W:75 x D:75 (cm)Seat Height: 46 to 58.5(cm)*Frame structure: Seat & back from hot mould plywood of minimum 12 mm thickness of ergonomic design to avoid back pain.•Seat Height adjustment and ergonomics: With Pneumatic gas lift with 300 N force Strokelength of 12.5 cm. Seat height will be adjustable and optimum Height is 44-56.5 cm so that feet will be touching parallel to the floor to ensure smooth blood circulation of legs.•Under structure facility: Revolving, Tilting and Lateral smooth movement on twin wheel castors fixed on five pronged wide base of 65 cm to 75 cm D.‘Tapestry: Minimum average weight required 400 to 490 gms per sq. Mtr. Tapestry will be tested quality such as stain test, ultra violet test, glue test and colour fastening with average weight of 450 grams per square meter. (All the stitches of seat and back boarder should be covered by plastic beading of black cover for elegant look.‘Cushioning: PU foam having density of 40 kg for back and 50 kgs/m3 for seat. Average thickness of foam not less than 50 mm + 10 mm Polly foam.‘Base: Tested High quality virgin material used which will be long lasting.‘Arm rest material: single piece round soft virgin quality PU handle reinforced within built steel rib. |
| 9 | Computer ChairComputer Chair with arm:Computer chair, moulded foam cushioned Scat & back covered with ABS shell, round PU handle.Seat height adjustment with pneumatic gas lift & tilt lock mechanism. Overall Size: H:88-98 x W-70 x D-70(cm) •Frame structure: Seat 86 back from hot mould plywood of minimum 12 mm thickness of ergonomic design to avoid back pain.•Seat Height adjustment and ergonomics: With Pneumatic gas lift with 300 N force•Under structure facility: Revolving, Tilting and Lateral smooth movement on twin wheel castors fixed on five pronged wide base of 65 cm to 75 cm D.‘Tapestry: Minimum average weight required 400 to 490 gms per sq. Mtr.Tapestry will be tested quality such as stain test, ultra violet test, glue test and color fastening with average weight of 450 grams per square meter. (All the stitches of seat and back boarder should be covered by plastic beading of black cover for elegant look..Cushioning: PU foam having density of 40 kg for back and 50 kgs/m3 for seat. Average thickness of foam not less than 50 mm + 10 mm Polly foam. •Base: Tested High quality virgin material used which will be long lasting.“Arm rest material: single piece round soft virgin quality PU handle reinforced within built steel rib. |
| 10 | C.A.S.U. |
| 11 | Office Chair Steel/Iron chair with arm rest. The back type is with Back rest with a width of 540 mm with arms and 4690mm without arms max. The back is made up wood veneer with foam back. Seat The seat height is at 455mm with cushion seat understructure the chair is made of rubber wood vencer with thickness of the leg 25mm and width of the leg 28mm. The overall height of the chair is 850mm with a max. width is 540mm. |
| 12 | Executives High Back Chair Executives High Back Chair Officer 7 no. Back Rest 12mm Thick (7 layers) hot pressed Plywood and moldedback foam upholstered with fabric Size of Back (HB)790mm(H) X 500mm(W) Seat ply 12mm thick 7 ply hot pressed plywood Fabric Delta Fabric 100%Polyester Abrasion Arm Rest Adjustable 1D arm rest with height adjustable up to 80mm with height adjustable up to 80mm & front and back with adjustable up to 60 mm. |
| 13 | Visitors ChairStainless Steel Waiting Chairs:Design Type: Standard, Seating Capacity: 3 Seat, Material: Stainless Steel, Gross Weight: 30 kg, Frame: Electroplating Iron frame, Spray: Plastic Iron Mesh, Aluminum Alloy Bar, Stainless Armrest and Leg, Size: 71’Wx27’Dx31’H |
| 14 | Notice Board Structure: Magnetic Green Board with pins, Frame: Aluminum Frame, Size: 3X4ft. |
| 15 | File CabinetStorage Cabinet with 4 adjustable shelves overall size H-1980x W-915 xD-485(mm) (H-78’’xW-36’’xD-19’’)Door& Shelves :CRCA IS 513 D Grade steel of not less than 20 swg.(1mm)Material specification :Back &two side: CRCA IS 513 D’Grade steel of not less than 21swg.(0.9) lock &Security;6 leavers inbuilt branded CAM Lock system withnon-interchangeableS.S.Key in Duplicate Door & Shelves: CRCA IS 513 D’ Grade steel of not less than 20 swg.(1mm)All steel part in powder coated finished with superior quality powder after 10 tanks Antirust treatment. |
| 16 | Life Long Learning |
| 17 | Computer ChairComputer chair, moulded foam cushion scat & back covered with ABS shell] round PU have. Seat height adjustment with pneumatic gas lift & tilt lock mechanism. Overall Size: H:88-98 x W-70 x D-70(cm)*Frame structure: Seat 86 back from hot mould plywood of minimum 12mm thickness of ergonomic design to avoid back pain.*Under structure facility: Revolving, Tilting and Lateral smooth movement on twin wheel castors fixed on five pronged wide base of 65 cm to 75 cm D.Tapestry: Minimum average weight required 400 to 490 gms per sq. mtr. Tapestry will be tested quality such as stain test, ultra violet test, glue test and color fastening with average weight of 450 grams per square meter. (All the stitches of seat and back boarder should be covered by plastic beading of black cover for elegant look..Cushioning: PU foam having density of 40 kg for back and 50 kgs/m3 for seat. Average thickness of foam not less than 50 mm 10 mm Polly foam. Base: Tested High quality virgin material used which will be long lasting. \"Arm rest material: single piece round soft virgin quality PU handle reinforced within built steel rib. |
| 18 | Podium(wooden)Podium Lecture Stand Teak wood and sunmica; size 1200 Hx500 Lx410D |
| 19 | Office ChairChair, made in SS Capsule pipes with power coating having foam cushion seat and covered with leather coving and PU handle (As per Sample Available at Section / Department) |
| 20 | Confidential Section |
| 21 | HOF Rev High Back ChairHigh Back office chairSeat Material: Leather Other Details-Erganamic Design-Available Aluminium Designer Base-Genune Ttalian Leather-Aluminium Die Case-Armrest with Polished-Veneer Finishing Top(Sample Photo available at P.R.O. Office) |
| 22 | ChairFiber Moulded Chair with hands seat and back cushion |
| 23 | Central Assessment Program Committee (Spot Valuation) |
| 24 | Fibber Moulded ChairChair with cushion Red Black Plastic Moulded chair with Black &sheet foam cushion with arm rest (56D*81W*56H centimetre)ir without Hand |
| 25 | Director, Innovation, Incubation & Linkages |
| 26 | Plastic StoolPlastic Stool Size H-2 x D-1 x 1 feet |
| 27 | Boy’s Hostel |
| 28 | Suggestion Box(size 16’’Hx10’’Wx5’’D Plywood/Sunmica with lock sustem and prefixing the name ‘’Suggestion Box with radium red colour letter) |
| 29 | Registrar Office |
| 30 | Computer Revolving chair Computer chair with arm, moulded foam cushioned seat & back covered with ABS shell, round PU handle. Seat height adjustment with pneumatic gas lift & tilt lock mechanism. Overall sizeH:88-98 x W-70 x D-70(cm). Lateral smooth movement on twin wheel castors fixed on five pronged wide base of 65 to 75 cm D. Cushioning: pu foam having density of 40 kg for back and 50 kgs/m3 or seat. Average thickness of foam not less than 50 mm+10mm poly foam. |
| 31 | Wooden Board Size 4x3 Wooden Board ( 18 mm plywood with teakwood Borderfront side –Sunmica (with viner & Polish) |
| 32 | Public Relation Office |
| 33 | HOF Rev High Back ChairHigh Back office chairSeat Material: Leather Other Details-Erganamic Design-Available Aluminium Designer Base-Genune Ttalian Leather-Aluminium Die Case-Armrest with Polished-Veneer Finishing Top(Sample Photo available at P.R.O. Office) |
| 34 | Health centre |
| 35 | Wooden Board4’x2’ Displaying name of employees as per previous purchase of deptt |
| 36 | Steel Siter 3 Seater ChairDesign Type: Standard, Seating Capacity: 3 Seat, Material: Stainless Steel, Gross Weight: 30 kg, Frame: Electroplating Iron frame, Spray: Plastic Iron Mesh, Aluminum Alloy Bar, Stainless Armrest and Leg, Size: 71’Wx27’Dx31’H |
| 37 | Doctor’s chairHigh Back ,Metal Base ,Cushion Brown/Black Comfort arm rest. |
| 38 | FiberChair Chair ,Cushion on Back & Seat Arms Chairs |
| 39 | Fiber StoolPlastic Stool Size H-2 x D-1 x 1 feet |
| 40 | Dr. Babasaeb Ambedkar Studies Center |
| 41 | Computer TableWooden Modular Computer Table, With Storage 3.5’ LX2’ W X2.5’h(feet) With Keyboards & CPU mounting and one side Drawer or Standard |
| 42 | Computer ChairComputer Chair with arm:Computer chair, moulded foam cushioned Scat & back covered with ABS shell, round PU handle.Seat height adjustment with pneumatic gas lift & tilt lock mechanism. Overall Size: H:88-98 x W-70 x D-70(cm) •Frame structure: Seat 86 back from hot mould plywood of minimum 12 mm thickness of ergonomic design to avoid back pain.•Seat Height adjustment and ergonomics: With Pneumatic gas lift with 300 N force•Under structure facility: Revolving, Tilting and Lateral smooth movement on twin wheel castors fixed on five pronged wide base of 65 cm to 75 cm D.\"Tapestry: Minimum average weight required 400 to 490 gms per sq. mtr.Tapestry will be tested quality such as stain test, ultra violet test, glue test and color fastening with average weight of 450 grams per square meter. (All the stitches of seat and back boarder should be covered by plastic beading of black cover for elegant look..Cushioning: PU foam having density of 40 kg for back and 50 kgs/m3 for seat. Average thickness of foam not less than 50 mm + 10 mm Polly foam. •Base: Tested High quality virgin material used which will be long lasting.\"Arm rest material: single piece round soft virgin quality PU handle reinforced within built steel rib. |
| 43 | Chairs (Black Colours)Dimension WxHxD(cm)60.9x98.2x64.2 upholstery Material –Leatherette Finish Colour-Black seat Height (cm)44.8Net Weight (kg)-13.17 |
| 44 | Revolving ExecutiveChairHigh Back office chairSeat Material: Leather Other Details-Erganamic Design-Available Aluminium Designer Base-Genuine Italian Leather-Aluminium Die Case-Armrest with Polished-Veneer Finishing Top(Sample Photo available at P.R.O. Office) |
| 45 | Engineering Section |
| 46 | 3Seater Guest ChairStainlesssteel waiting ChairDesign Type :Standard ,seating capacity:3 seat ,material :Stainless steel Gross Weight :30kg ,frame: Electroplating Iron frame , spray :plastic iron mesh Aluminium Alloy Bar ,stainless Armrest and leg size 71’Wx27’Dx31’H |
| 47 | File CabinetStorage Cabinet with 4 adjustable shelves overall size H-1980x W-915 xD-485(mm) (H-78’’xW-36’’xD-19’’)Door& Shelves :CRCA IS 513 D Grade steel of not less than 20 swg.(1mm)Material specification :Back &two side: CRCA IS 513 D’Grade steel of not less than 21swg.(0.9) lock &Security;6 leavers inbuilt branded CAM Lock system withnon-interchangeableS.S.Key in Duplicate Door & Shelves: CRCA IS 513 D’ Grade steel of not less than 20 swg.(1mm)All steel part in powder coated finished with superior quality powder after 10 tanks Antirust treatment. |
| 48 | Girls Hostel |
| 49 | Suggestion Boxsize 16’’x 10’’Wx5’’D plywood/sunmica with lock system and prefixing the name “Suggestion Box with radium red colour letter) |
| 50 | Biotechnology |
| 51 | Executive High Back ChairHOF Rev High Back ChairHigh Back office chairSeat Material: Leather Other Details-Ergonomic Design-Available Aluminium Designer Base-Genuine Italian Leather-Aluminium Die Case-Armrest with Polished-Veneer Finishing Top(Sample Photo available at P.R.O. Office) |
| 52 | Computer Chair with HandComputer Chair with arm:Computer chair, moulded foam cushioned Scat & back covered with ABS shell, round PU handle.Seat height adjustment with pneumatic gas lift & tilt lock mechanism. Overall Size: H:88-98 x W-70 x D-70(cm) •Frame structure: Seat 86 back from hot mould plywood of minimum 12 mm thickness of ergonomic design to avoid back pain.•Seat Height adjustment and ergonomics: With Pneumatic gas lift with 300 N force•Under structure facility: Revolving, Tilting and Lateral smooth movement on twin wheel castors fixed on five pronged wide base of 65 cm to 75 cm D.\"Tapestry: Minimum average weight required 400 to 490 gms per sq. mtr.Tapestry will be tested quality such as stain test, ultra violet test, glue test and color fastening with average weight of 450 grams per square meter. (All the stitches of seat and back boarder should be covered by plastic beading of black cover for elegant look..Cushioning: PU foam having density of 40 kg for back and 50 kgs/m3 for seat. Average thickness of foam not less than 50 mm + 10 mm Polly foam. •Base: Tested High quality virgin material used which will be long lasting.\"Arm rest material: single piece round soft virgin quality PU handle reinforced within built steel rib. |
| 53 | Combination white Board write plus Felt+Dual Purpose Board, white board half write and felt std size with stand Green colour 90000x1500 |
| 54 | White BoardWhite ceramic surface for dry wipe markers,board size 1200x2400 |
| 55 | White BoardCornerscromeplated, dry wipe accpt magnet size 600x900 |
| 56 | Botany |
| 57 | White Board withstand (movable)Monotaro 5x4 Feet white board with Legs(stand) Both Side |
| 58 | Office executive chair Virgo swift Ergonomic High Back Leatherette office chair with fixed arms Heavy Duty metal Base Home office Desk chair ,3 years warranty(black) |
| 59 | Business Administration Management |
| 60 | Rotating ChairExecutive High Back chair with centre tilt mechanism tilt locking rear side of seat covered with ABS shell dual laired PU foam cushion overall size:H:105:117.5xW:75xD:75Frame structure: seat& Back from hot moulded plywood minimum12mm thickness seat height;44-56.5cm seat Adjustment and agronomics |
| 61 | Plastic chair with cushionColour Red& BlackProduct: Dimension 55.9x55.9Wx81.3Hcm Style Modern |
| 62 | Flap Chairs With CushionStyle: Metal,Armrest with Armrest folded unfolded Rotary Fixed Finish :powder coating |
| 63 | Chemical Technology |
| 64 | Office ChairFeather light Model opus HB, Asynchronous Lumbar, control mechanism |
| 65 | White Board 6ftx4ft Aluminium edge 1 inch board, one side white board premium mica with three hanging clamps. |
| 66 | White Board2ftx3ft Aluminium edge 1 inch board, one side white board premium mica with three hanging clamps. |
| 67 | White BoardSuitable for class room teaching,Size-10’x4’ |
| 68 | Computer Science &Engg Dept |
| 69 | Wooden Modular Computer TableWooden Modular Computer Table, with storage 3.5’Lx2’Wx2.5’H(Feet) with key board & CPU mounting and one side Drawer or Standard |
| 70 | Key Board 24 key,1.5x1.5 (feet) or standard size |
| 71 | Shoe Racks 3’hx4’Wx1’or standard size |
| 72 | Notice BoardsSize 4’Wx3H or standard size |
| 73 | Deptt of Geology |
| 74 | Visitor’s Bench/ThreeSeaterwaiting Area ChairStainless Steel Waiting Chairs:Design Type: Standard, Seating Capacity: 3 Seat, Material: Stainless Steel, Gross Weight: 30 kg, Frame: Electroplating Iron frame, Spray: Plastic Iron Mesh, Aluminum Alloy Bar, Stainless Armrest and Leg, Size: 71’Wx27’Dx31’H |
| 75 | Deptt of English |
| 76 | White Plastic Armless Chairs High Quality Virgin plastic, durable,without cushion stackable(W47xd51XH89cm) |
| 77 | Deptt of Marathi |
| 78 | Class Room Chairs with cushion and Writing PadStyle :MetalAmrest with Armrest Folded unfolded Rotary Fixed Finish: Powder Coating |
| 79 | Executive Revolving chairs HODRevolving Chair H-1310*W-720*D-720 officer chair 4120 |
| 80 | Chairs with cushion for HOD cabinDimension WxHxD (cm) 60.9 x 98.2 x 64.2 upholstery Material –Leatherette Finish Colour-Black seat Height (cm)44.8Net Weight (kg)-13.17 |
| 81 | Dept of Microbiology |
| 82 | Computer Chairs with arm, revolving Computer Chairs moulded foam cushion, seat & back covered with ABS steel, roundhandle seat height adjustment with gas lift &tilt lock mechanism, overall Standard Size,with hand |
| 83 | Moulded ChairsDimension WxHxD (cm) 60.9 x 98.2 x64.2 upholstery Material –Leatherette Finish Colour-Black seat Height (cm)44.8Net Weight (kg)-13.17 |
| 84 | Moulded Stool Size 17’’/18’’ hard Materia |
| 85 | File CabinetStorage Cabinet with 4 adjustable shelves overall size H-1980x W-915 xD-485(mm) (H-78’’xW-36’’xD-19’’)Door& Shelves :CRCA IS 513 D Grade steel of not less than 20 swg.(1mm)Material specification :Back &two side: CRCA IS 513 D’Grade steel of not less than 21swg.(0.9) lock &Security;6 leavers inbuilt branded CAM Lock system withnon-interchangeableS.S.Key in Duplicate Door & Shelves: CRCA IS 513 D’ Grade steel of not less than 20 swg.(1mm)All steel part in powder coated finished with superior quality powder after 10 tanks Antirust treatment. |
| 86 | Deptt of physical Education |
| 87 | Steel Gym locker*6x5 Material stainless Steel Storage Cabinet *30 Cabinet *size of cabinet:18’’width x18’’Height x18’’ Depth*Gauge :18(1.2mm)*Finish :powder coated*Type:Storage locker with single Door Cabinet |
| 88 | White Board*size:4 feet x 6 feet*Resin coated White Board Marker surface*Inner core: Hard Smooth Board *Frame :AnodizedAluminium*Corner: ABS plastic,*Mounting Hardware: Included*High Scratch-resistance and Maximum Readability with MinimumGlare |
| 89 | Deptt of Physics |
| 90 | Executive ChairDimension W x H x D (cm)76.1x113.6-131.1x76.1 upholstery Material –LeatherFinish Colour-Black seat Height (cm)44.1-54.1 Net Weight (kg)-22.5 |
| 91 | Chair with CushionDimension W x H x D (cm)60.9x98.2x64.2 upholstery Material –Leatherette Finish Colour-Black seat Height (cm)44.8Net Weight (kg)-13.17 |
| 92 | Computer TableCaliber202 Computer Table Black Colour Net Weight(kg)-21Primary Material-MDFFinish Colour-BlackDimension W x H X D (cm)80x73.4x45 |
| 93 | Statistics |
| 94 | Writing Boardwith Vitreous Enamelled Steel Sheet top Surface ,Board, colour: Green Purpose :Writing with Chalk , Glass at 60 deg,Led:02 min, Size (mmxmm):1200x2400 Or Latest |
| 95 | Deptt of Zoology |
| 96 | ChairChair made in SS capsule Pipe with powder coating seatand covered with leather coving and PU handle all cushion (As per sample available at Zoology Department) |
| 97 | Dr.Babasaheb Aambedkar Thoughts |
| 98 | Moulded Revolving Chair with hand back and seat CushionDimension W x H x D (cm)60.9x98.2x64.2 upholstery Material –Leatherette Finish Colour-Black seat Height (cm)44.8Net Weight (kg)-13.17 |
| 99 | Home Science |
| 100 | Office Cabinet4 Drawer Filling cabinet with automatic locking system each drawer will be mounted on delink ball bearing with double extension telescopic channel overall size H-1320xW-47x D-623(mm)(H-561.9xW-18.5xD-24.5)drawer size W-385xD560)(mm) |