|
| 1 | Sub Estimate No 1:- Installation of submersible pum (Primary School)Supplying and erecting minimum Three & above star rated submersible pump set of 1.125 KW/1.5 HP with 230 V, 50 c/s AC supply suitable for 100 mm dia. borewell suitable for 10 to 50 LPM discharge at 150 to 40 m head & discharge & delivery pipe of Size-32 mm diameter with a necessary H type clamps as per specification No. WP-SMP. |
| 2 | Supplying & erecting flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 3 | Providing& fixing S.S. Nipples 32/40 mm |
| 4 | Fixing 32/40mm GI Bend. |
| 5 | Providing& fixing Garware Wire rope 12 mm |
| 6 | Supplying & erecting automatic control panel for 1 Ph, 230 volt, A.C.Submersible/centrifugal pump set up to 3 HP consisting of DOL starter Of suitable relay range S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54protection. |
| 7 | 2X 2 foot. Sheet metal box ForDOL Stater GI with wooden board |
| 8 | Supplying and erecting high density polythene pipe ISI mark 32 mm dia.suitable for pressure of 6 kg/cm2 connected to jet/submersible pump with required material complete. |
| 9 | Providing pipe type earthing with 40mm dia G.I pipe or 20mm dia G.I rodcomplete with all materials testing and recording the results as per specification no EA -EP |
| 10 | Supplying and erecting 16 to 32 A, 10kA, DPMCB suitable to fix in 2 module of modular switch in provided box complete & duly concealed with necessary material and connected. |
| 11 | Providing and fixing H.D.P container one piece moulded water tank made out of lowden sity polythyler and built corrugati on including of delivery up to destination hoisting and fixing of accessories such as in let, out let overflow of all tanks capacity above 1000 to 20,000 litres |
| 12 | cPVC pipe 32mm dia. |
| 13 | Elbow 90 Degree for 32mm dia. |
| 14 | P.V.C.Socket 32mm dia. |
| 15 | Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A- 1/259) Lift 0 to 1.5M |
| 16 | Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. roadincluding removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-3/259)Lift 0 to 1.5M |
| 17 | Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundationand footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement ispermitted.) (Excluding M.S. or Tor reinforcement) |
| 18 | Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire). (Bd-F-17/306) b)Tor Steel |
| 19 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 20 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation ,surcharging, etc.complete |
| 21 | Providing dry/trap/granite/quartzite/ gneiss rubble stone soling 15cm to 20cm thick including hand packing and compacting etc. complete. |
| 22 | Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags/cum) (b) In PCC M-150 |
| 23 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete |
| 24 | Sub Estimate No 2:- Installation of submersible pum (Sangharsh Group)Supplying and erecting minimum Three & above star rated submersible pump set of 1.125 KW/1.5 HP with 230 V, 50 c/s AC supply suitable for 100 mm dia. borewell suitable for 10 to 50 LPM discharge at 150 to 40 m head & discharge & delivery pipe of Size-32 mm diameter with a necessary H type clamps as per specification No. WP-SMP. |
| 25 | Supplying & erecting flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 26 | Providing& fixing S.S. Nipples 32/40 mm |
| 27 | Fixing 32/40mm GI Bend. |
| 28 | Providing& fixing Garware Wire rope 12 mm |
| 29 | Supplying & erecting automatic control panel for 1 Ph, 230 volt, A.C.Submersible/centrifugal pump set up to 3 HP consisting of DOL starter Of suitable relay range S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54protection. |
| 30 | 2X 2 foot. Sheet metal box ForDOL Stater GI with wooden board |
| 31 | Supplying and erecting high density polythene pipe ISI mark 32 mm dia.suitable for pressure of 6 kg/cm2 connected to jet/submersible pump with required material complete. |
| 32 | Providing pipe type earthing with 40mm dia G.I pipe or 20mm dia G.I rodcomplete with all materials testing and recording the results as per specification no EA -EP |
| 33 | Supplying and erecting 16 to 32 A, 10kA, DPMCB suitable to fix in 2 module of modular switch in provided box complete & duly concealed with necessary material and connected. |
| 34 | Providing and fixing H.D.P container one piece moulded water tank made out of lowden sity polythyler and built corrugati on including of delivery up to destination hoisting and fixing of accessories such as in let, out let overflow of all tanks capacity above 1000 to 20,000 litres |
| 35 | cPVC pipe 32mm dia. |
| 36 | Elbow 90 Degree for 32mm dia. |
| 37 | P.V.C.Socket 32mm dia. |
| 38 | Sub Estimate No 3:- Installation of submersible pum (Inami Jamin)Supplying and erecting minimum Three & above star rated submersible pump set of 1.125 KW/1.5 HP with 230 V, 50 c/s AC supply suitable for 100 mm dia. borewell suitable for 10 to 50 LPM discharge at 150 to 40 m head & discharge & delivery pipe of Size-32 mm diameter with a necessary H type clamps as per specification No. WP-SMP. |
| 39 | Supplying & erecting flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 40 | Providing& fixing S.S. Nipples 32/40 mm |
| 41 | Fixing 32/40mm GI Bend. |
| 42 | Providing& fixing Garware Wire rope 12 mm |
| 43 | Supplying & erecting automatic control panel for 1 Ph, 230 volt, A.C.Submersible/centrifugal pump set up to 3 HP consisting of DOL starter Of suitable relay range S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54protection. |
| 44 | 2X 2 foot. Sheet metal box ForDOL Stater GI with wooden board |
| 45 | Supplying and erecting high density polythene pipe ISI mark 32 mm dia.suitable for pressure of 6 kg/cm2 connected to jet/submersible pump with required material complete. |
| 46 | Providing pipe type earthing with 40mm dia G.I pipe or 20mm dia G.I rodcomplete with all materials testing and recording the results as per specification no EA -EP |
| 47 | Supplying and erecting 16 to 32 A, 10kA, DPMCB suitable to fix in 2 module of modular switch in provided box complete & duly concealed with necessary material and connected. |
| 48 | Providing and fixing H.D.P container one piece moulded water tank made out of lowden sity polythyler and built corrugati on including of delivery up to destination hoisting and fixing of accessories such as in let, out let overflow of all tanks capacity above 1000 to 20,000 litres |
| 49 | cPVC pipe 32mm dia. |
| 50 | Elbow 90 Degree for 32mm dia. |
| 51 | P.V.C.Socket 32mm dia. |
