Arc For Fabrication Of Steel Items For Various Subdivision Under Bardoli Division, Surat-Gujarat

Arc For Fabrication Of Steel Items For Various Subdivision Under Bardoli Division; Fabrication of Anchor Rod from 16 SQ.mm MS Raoundbar & 65 mm x 65 mm x 6 mm / 50 mm x 50 mm x 6 mm M.S. angle as per approved drawing and requirement of the company. Fabrication of Eye Bolt from 16 SQ.mm MS Raoundbar with supplying of 2 (two) nuts of suitable size as per approved drawing and requirement of the company. Fabrication of Turn Buckle from 16 SQ.mm MS Raoundbar & 65 mm x 65 mm x 6 mm / 50 mm x 50 mm x 6 mm M.S. angle as per approved drawing and requirement of the company. Fabrication of 11 (feet) long Top/Bottom/D.O. angle from 65 mm x 65 mm x 6 mm M.S. angle as per approved drawing and requirement of the company. Fabrication of 9 (feet) long Top/Bottom/D.O. angle from 65 mm x 65 mm x 6 mm M.S. angle as per approved drawing and requirement of the company. Fabrication of 46 (feet) long Tapping / bracing angle from 65 mm x 65 mm x 6 mm M.S. angle as per approved drawing and requirement of the company. Fabrication of 23 (feet) long bracing/ support angle from 65 mm x 65 mm x 6 mm M.S. angle as per approved drawing and requirement of the company. Fabrication of 11KV HT V Cross Arm from 65 mm x 65 mm x 6 mm M.S. angle as per approved drawing and requirement of the company. Fabrication of 11KV HT Top fitting from 65 mm x 65 mm x 6 mm M.S. angle and 50mm x 6 mm M.S. flat as per approved drawing and requirement of the company. Fabrication of 22KV HT Top fitting from 65 mm x 65 mm x 6 mm M.S. angle and 50mm x 6 mm M.S. flat as per approved drawing and requirement of the company. Fabrication of 22KV HT V Cross Arm from 65 mm x 65 mm x 6 mm M.S. angle as per approved drawing and requirement of the company. Fabrication of Guy Clamp pair suitable for PSC pole from 50mm x 6 mm M.S. flat as per approved drawing and requirement of the company. Fabrication of U Clamp from 50mm x 6 mm M.S. flat as per approved drawing and requirement of the company. Fabrication of C clamp suitable for PSC pole from 50mm x 6 mm M.S. flat as per approved drawing and requirement of the company. Fabrication of C clamp suitable for RSJ GIRDER pole from 50mm x 6 mm M.S. flat as per approved drawing and requirement of the company. Fabrication of Three hole patti from 50mm x 6 mm M.S. flat as per approved drawing and requirement of the company. Fabrication of 11 (feet) long Top/Bottom channel from 100 mm x 50 mm x 5 mm M.S. channel as per approved drawing and requirement of the company. Fabrication of 9 (feet) long Top/Bottom channel from 100 mm x 50 mm x 5 mm M.S. channel as per approved drawing and requirement of the company. Fabrication of 11(feet) long angle bracing from 50 mm x 50 mm x 6 mm M.S. angle as per approved drawing and requirement of the company. Fabrication of 9(feet) long angle bracing from 50 mm x 50 mm x 6 mm M.S. angle as per approved drawing and requirement of the company. Fabrication of 11 (feet) long channel welded from assorted length of scrap channel as per approved and requirement of the company Fabrication of 9 (feet) long channel welded from assorted length of scrap channel as per approved and requirement of the company Fabrication of Guy Clamp pair suitable for 10 mtr PSC pole from 50mm x 6 mm M.S. flat as per approved drawing and requirement of the company. Fabrication of Guy Clamp pair suitable for 9/11mtr RSJ GIRDER pole from 50mm x 6 mm M.S. flat as per approved drawing and requirement of the company.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	04-02-2025			06-02-2025

INR 590 /-

INR 5000.0 /-

INR 5 Lakhs /-